3-Piece Dark Gray Faux Leather Office Reception Sofa Set with Polished Reddish Wood Trim (model OFS-123-DG-RW-01) is listed under Genuine Leather Sofa, with overall dimensions of 2080 × 920 × 960 mm and main material of Top-grain Cowhide. Load capacity: 136 kg. Certifications: Formal,commercial,styling,Fixed,non-reclining,structure,upholstered,seating. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Three-seater sofa overall dimensions | 2080 x 920 x 960 mm | |
|---|---|---|
| Two-seater loveseat overall dimensions | 1410 x 920 x 960 mm | |
| Single-seater armchair overall dimensions | 1140 x 920 x 960 mm | |
| Standard seat height from floor | 480 mm | |
| Seat depth (cushion front to back) | 560 mm | |
| Single seat width (per seating position) | 600 mm | |
| Total backrest height from seat surface | 480 mm | |
| Armrest height from floor | 610 mm | |
| Armrest cross-section thickness | 107 mm | |
| Back panel structural thickness | 35 mm | |
| Wood base plinth height from floor | 60 mm | |
| Upholstery material thickness | 1.5 mm | |
| Seat cushion foam thickness | 120 mm | |
| Seat Cushion Thickness | 180 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Per-seat static load capacity | 136 kg | |
|---|---|---|
| Seat foam density | 45 kg/m³ | |
| Foam rebound rate | 60% | |
| Frame wood moisture content | 9% | |
| Surface abrasion resistance (upholstery) | 50000 cycles | |
| Total set net weight (3 pieces) | 102 kg | |
| Standard product warranty | 3 years | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm | |
| Per-seat Load Reference | 130 kg/seat |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seat and back upholstery | 1.5mm thick dark gray faux leather, stain and moisture resistant | |
|---|---|---|
| Armrest and base trim | Polished reddish solid wood, multi-coat lacquer finish | |
| Internal structural frame | Kiln-dried hardwood with 5mm multi-layer plywood panels, anti-insect treated | |
| Cushion and back padding | High-density polyurethane foam with anti-deformation protective layer | |
| Fasteners and hardware | Acid-washed, phosphated rust-resistant steel fittings | |
| Seam construction | Reinforced stitching with 8 stitches per 25mm seam pitch |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating configuration | Fixed 3+2+1 modular set for formal reception layouts, no recline or adjustment | |
|---|---|---|
| Surface maintenance | Wipe-clean faux leather surface suitable for daily high-traffic office use | |
| Structural stability | Low solid wood plinth base with integrated feet, no casters for fixed placement | |
| Assembly requirement | Knock-down leg attachment required for on-site installation, minimal tools needed |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive office reception areas | Formal wood-trimmed design suitable for executive waiting spaces and visitor seating | |
|---|---|---|
| Corporate lobby and lounge zones | Durable easy-clean upholstery for high-traffic public office entrance and waiting areas |
EU Market Access Requirements* EN Standards
| EN 13759:2012 | Applicable standard for domestic and contract seating, specifying safety and structural performance requirements | |
|---|---|---|
| EN 1021-1:2014 | Applicable standard for upholstered furniture flammability resistance to cigarette ignition sources for public spaces |
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.4 |
|---|
Standards applicable to China-market projects
| GB 18584-2001 | Applicable standard for formaldehyde and heavy metal emission limits for wood furniture used in indoor office spaces |
|---|
This product must meet the following technical requirements: 1. GB 18584-2001: Applicable standard for formaldehyde and heavy metal emission limits for wood furniture used in indoor office spaces; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp