| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Three-seater sofa overall dimensions | 2000 x 850 x 880 mm | |
|---|---|---|
| Single-seater armchair overall dimensions | 900 x 800 x 880 mm | |
| Large rectangular coffee table overall dimensions | 1200 x 600 x 450 mm | |
| Small square side table overall dimensions | 600 x 600 x 500 mm | |
| Three-seater sofa seat height | 420 mm | |
| Three-seater sofa seat depth | 550 mm | |
| Sofa armrest top height above floor | 620 mm | |
| Sofa backrest height above seat | 460 mm | |
| Table top thickness | 50 mm | |
| Table leg cross-section | 60 x 60 mm | |
| Seat Cushion Thickness | 180 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Per-seat static load capacity | 150 kg | |
|---|---|---|
| Three-seater sofa total net weight | 75 kg | |
| Recommended total seated user capacity | 5 persons | |
| Seat foam compression set rating reference | 35 kg/m3 | |
| Upholstery abrasion resistance reference | 50000 double rubs | |
| Total set seated user capacity | 5 persons | |
| Seat foam compression set resistance | <10% compression set after 80000 press cycles | |
| Upholstery abrasion resistance | 50000 double rubs | |
| Upholstery seam strength | 120 N tear resistance | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat and back upholstery | Black smooth faux leather (polyurethane coated) | |
|---|---|---|
| Seat cushion core | 35kg/m3 high-density polyurethane foam | |
| Backrest cushion core | 28kg/m3 medium-density polyurethane foam | |
| Sofa inner load-bearing frame | 25mm thick kiln-dried hardwood and engineered plywood | |
| Sofa armrests and trim | Red-brown solid wood veneer over engineered wood | |
| Table tops and legs | Red-brown solid wood veneer over high-density fiberboard | |
| Stitching construction | Even polyester thread stitching with 8mm seam pitch | |
| Bottom feet pads | 10mm thick non-marking rubber pads | |
| Table surface finish | Semi-gloss scratch-resistant polyurethane lacquer | |
| Bottom contact feet pads | 10mm thick non-marking rubber pads | |
| Sofa base support structure | Solid wood perimeter base frame | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | Fixed modular 5-seat layout with 1 three-seater sofa and 2 single armchairs | |
|---|---|---|
| Upholstery panel design | Segmented stitched seat and back panels | |
| Table surface design | Flat level tops with squared slightly rounded edges | |
| Seating posture support | Fixed 100-degree upright backrest angle | |
| Anti-slip stability | Rubber foot pads at all base contact points | |
| Matching finish coordination | Identical red-brown wood finish across all sofa trim and table units | |
| Cleaning access | Smooth non-porous upholstery and lacquered wood surfaces | |
| Structural load distribution | Full perimeter base support on all seating units | |
| Cushion Service Configuration | Recommended 2 removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Total shipping carton count | 7 cartons | |
|---|---|---|
| Largest carton (three-seater sofa) dimensions | 2050 x 900 x 600 mm | |
| Single armchair carton dimensions | 950 x 850 x 600 mm | |
| Large coffee table carton dimensions | 1250 x 650 x 120 mm | |
| Small side table carton dimensions | 650 x 650 x 120 mm | |
| Total shipment gross weight | 210 kg | |
| Total shipment CBM volume | 2.3 cbm | |
| On-site assembly time | 30 minutes | |
| 20ft GP container loading capacity | 18 sets | |
| Product warranty period | 3 years |
Recommended spaces / users / usage modes
| Corporate reception and waiting areas | Formal professional appearance suitable for executive office lobbies, visitor waiting rooms and corporate guest areas, creates polished first impression for visitors | |
|---|---|---|
| Executive office internal seating | Coordinated wood and black leather design matches traditional executive desk finishes, suitable for in-office guest seating for 5 visitors | |
| Government and institutional meeting spaces | Formal non-reclining design aligns with official public space requirements, durable construction supports high daily traffic | |
| Hotel business center lounges | Wipe-clean faux leather and wood finishes withstand frequent guest use, modular layout can be arranged to fit different lounge floor plans | |
| Recommended complementary configuration | Pairs with matching wood-trimmed executive desks and leather office chairs for uniform office furnishing schemes | |
| Suitable flooring types | Performs well on polished tile, engineered wood, marble and low-pile commercial carpet, rubber feet prevent floor damage | |
| Bank and financial service waiting areas | Formal structured design conveys professional trustworthiness, durable surfaces withstand high daily visitor volume |
EU Market Access Requirements* EN Standards
| EN 1335-2:2018 | Applicable standard for office seating strength, durability and safety, applicable for non-reclining public reception seating | |
|---|---|---|
| EN 15372:2016 | Applicable standard for office furniture strength, durability and safety for non-seating items including tables | |
| EN 1021-1:2014 | Applicable standard for upholstered furniture flammability (cigarette ignition resistance), required for public area commercial seating | |
| EN 71-3:2019 | Applicable standard for migration of certain elements in furniture materials, setting heavy metal limits for contact surfaces |
US and Canada office-furniture standards
| ANSI/BIFMA X5.4-2020 | Applicable standard for lounge and public office seating, defining static load, impact and cyclic durability requirements | |
|---|---|---|
| ANSI/BIFMA X5.5-2021 | Applicable standard for desk/table products, defining vertical load, stability and leg strength requirements |
Standards applicable to China-market projects
| GB/T 3324-2017 | Applicable standard for wooden office furniture, defining dimensional tolerances, surface finish quality and structural stability for wood-trimmed sofas and tables | |
|---|---|---|
| GB 18584-2001 | Applicable standard for limit of harmful substances in wooden furniture, setting formaldehyde emission limits for engineered wood components | |
| GB 20400-2006 | Applicable standard for leather and faux leather upholstery materials, defining limits for harmful chemical content in contact surfaces | |
| GB/T 19001-2016 | Applicable quality management system standard for furniture manufacturing, ensuring consistent production quality across bulk orders |
This product must meet the following technical requirements: 1. GB/T 3324-2017: Applicable standard for wooden office furniture, defining dimensional tolerances, surface finish quality and structural stability for wood-trimmed sofas and tables; 2. GB 18584-2001: Applicable standard for limit of harmful substances in wooden furniture, setting formaldehyde emission limits for engineered wood components; 3. GB 20400-2006: Applicable standard for leather and faux leather upholstery materials, defining limits for harmful chemical content in contact surfaces; 4. GB/T 19001-2016: Applicable quality management system standard for furniture manufacturing, ensuring consistent production quality across bulk orders; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
