| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 3380 x 2110 x 860 mm | |
|---|---|---|
| Seat height | 480 mm | |
| Seat depth (main sofa seats) | 635 mm | |
| Chaise lounge depth | 1960 mm | |
| Backrest height | 480 mm | |
| Armrest height | 640 mm | |
| Center console width | 280 mm | |
| Seat cushion thickness | 150 mm | |
| Back cushion thickness | 120 mm | |
| Clearance under sofa base | 50 mm | |
| Cup holder diameter | 90 mm | |
| Side pocket opening height | 200 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Total static load capacity | 1500 kg | |
|---|---|---|
| Net product weight | 113 kg | |
| Seating capacity | 5 people | |
| Seat foam density | 35 kg/m³ | |
| Back/arm foam density | 28 kg/m³ | |
| Foam rebound rate | 60% | |
| Upholstery abrasion resistance | 50000 cycles | |
| Seam stitch pitch | 8 stitches per 30 mm | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm |
Core acceptance fields · Panels / hardware / frame / upholstery
| External upholstery | 1.2 mm thick faux leather with grain finish | |
|---|---|---|
| Internal load-bearing frame | Kiln-dried solid hardwood and 18 mm plywood | |
| Seat cushion core | High-density polyurethane foam wrapped in 20 mm polyester batting | |
| Back/arm cushion core | Medium-density polyurethane foam wrapped in soft polyester fiber | |
| Seat support system | 4 mm thick sinuous steel springs with rubber webbing | |
| Accent trim | Gloss black PVC edge trim with walnut-tone wood veneer inlays | |
| Connecting hardware | Powder-coated steel interlocking brackets | |
| Base frame | Solid engineered wood frame covered in matching upholstery | |
| Storage pocket material | Same faux leather upholstery with reinforced fabric lining | |
| Console surface | Padded faux leather top with wood-tone trim around recessed cup holders | |
| Frame surface treatment | Moisture-resistant sealant applied to internal wood components | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% |
Adjustment / rotation / tilt / mobility / storage features
| Center console cup holders | Two recessed 90 mm diameter holders for drink containers | |
|---|---|---|
| Side arm storage pocket | Open fabric-lined pocket on right arm for magazines/remotes | |
| Sectional interlocking | Steel bracket system locks sofa and chaise segments securely | |
| Quilted seat segmentation | Stitched grid pattern prevents cushion fill migration | |
| Padded lumbar bolsters | Three attached cylindrical neck/lumbar cushions with black trim | |
| Low-profile base design | Floor-hugging frame eliminates leg tripping hazards | |
| Reclined chaise seating | Extra-long right chaise allows full leg extension for lounging | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
| Residential living rooms | Suited for open-plan or large enclosed living spaces for family and guest seating | |
|---|---|---|
| Home theater rooms | Chaise lounge and console cup holders support extended media viewing use | |
| Executive lounge areas | Premium faux leather finish and storage features fit office break and waiting zones | |
| Apartment open-plan lofts | Large multi-seat layout zones seating areas without permanent room dividers | |
| Basement recreation rooms | Stain-resistant faux leather surface and durable frame withstand frequent recreational use | |
| Recommended pairing | Low-profile coffee table placed adjacent to main sofa seating edge |
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Furniture - Strength, durability and safety requirements for domestic seating | |
|---|---|---|
| EN 1021-1:2014 | Upholstered furniture ignitability resistance to smouldering cigarette source | |
| EN 1021-2:2014 | Upholstered furniture ignitability resistance to match flame equivalent source |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to internal frame construction | |
|---|---|---|
| GB 20400-2006 | Limit of harmful substances in leather/faux leather upholstery materials | |
| GB/T 1952.1-2012 | Test methods for strength and durability of upholstered sofas |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to internal frame construction; 2. GB 20400-2006: Limit of harmful substances in leather/faux leather upholstery materials; 3. GB/T 1952.1-2012: Test methods for strength and durability of upholstered sofas; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
