| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 780 x 760 x 820 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Recommended user weight | 140 kg | |
|---|---|---|
| Static frame verification load | 420 kg | |
| Net weight | 15 kg | |
| Seating capacity | 1 person | |
| Backrest rearward angle | 105 degrees from horizontal | |
| Seat foam thickness | 100 mm | |
| Back foam thickness | 60 mm | |
| Fabric Martindale abrasion target | 50,000 cycles | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat upholstery | Grey woven textile with a dense mixed-yarn appearance | |
|---|---|---|
| Back upholstery | Matching grey woven fabric over a curved padded back panel | |
| Arm pads | Fabric-covered padded sleeves fitted over the horizontal metal arm rails | |
| Metal frame | Black round-tube steel frame forming arm supports, legs, and side perimeter | |
| Frame finish | Matt black powder-coated surface with smooth continuous bends | |
| Internal seat support | Rigid plywood or molded composite seat board with elastic webbing support | |
| Cushion filling | High-resilience polyurethane foam with a soft polyester fiber top layer | |
| Back filling | 45 kg/m3 polyurethane foam pad with fabric-laminated finish | |
| Floor contact tips | Small black polymer glides at all four exposed leg ends | |
| Joining hardware | Welded tube joints with bolted upholstered body connections | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame |
Adjustment / rotation / tilt / mobility / storage features
| Arm support | Continuous tubular side frame provides left and right arm support at 210 mm above the seat | |
|---|---|---|
| Back support | Tall curved back wraps around the upper body and provides shoulder-height lateral enclosure | |
| Seating posture | Fixed relaxed lounge angle with a 420 mm seat height and 105-degree back inclination | |
| Mobility | Static four-point chair design with polymer glides; no casters or swivel mechanism are present | |
| Arm pad comfort | Each metal arm rail includes a 260 mm padded fabric sleeve to reduce forearm contact pressure | |
| Floor protection | Hard polymer end caps isolate the metal legs from hard floors and allow light repositioning | |
| Cleaning access | Open frame underneath permits broom or vacuum access below the 250 mm floor clearance | |
| Assembly method | Knockdown frame-to-body attachment with four primary fasteners is the expected delivery method | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Office lounge | Suitable for employee relaxation zones and informal touchdown areas with one-person seating per unit | |
|---|---|---|
| Reception area | Appropriate for waiting areas where visitors need a soft seat, back support, and arm support | |
| Hotel lobby | Can be used in pairs beside a coffee table in lobby or guest-corner layouts | |
| Co-working space | Suitable for breakout zones, quiet corners, and informal conversation seating | |
| Senior living lounge | Usable in assisted lounges where a 420 mm seat and integrated arms aid sit-down support | |
| Residential living room | Can serve as an accent chair in a living room, study, or bedroom reading corner | |
| Cafe waiting zone | Suitable for premium cafe seating where a relaxed lounge posture is desired | |
| Recommended Matching Desk Size | 2.4 m executive desk |
EU Market Access Requirements* EN Standards
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.4 |
|---|
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
