| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall footprint | 820 x 680 x 830 mm | |
|---|---|---|
| Seat width | 570 mm | |
| Seat depth | 570 mm | |
| Seat height | 490 mm | |
| Back height above seat | 340 mm | |
| Integrated arm/side height | 610 mm from floor | |
| Under-seat ground clearance | 180 mm | |
| Front apron height | 120 mm | |
| Leg projection and splay | Front legs splay outward 45 mm from vertical | |
| Leg cross-section | 42 x 42 mm at the upper joint | |
| Footprint between front feet | 610 mm center-to-center | |
| Turning clearance radius | 760 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Net weight | 21.1 kg | |
|---|---|---|
| Recommended user load | 150 kg | |
| Seating capacity | 1 person | |
| Seat foam density | 35 kg/m3 | |
| Seat foam thickness | 140 mm thick compressed cushion | |
| Back padding thickness | 80 mm | |
| Back resting angle | 102 degrees from horizontal | |
| Fabric abrasion acceptance target | 30,000 Martindale cycles | |
| Seam stitch pitch | 8 stitches per 50 mm | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
Core acceptance fields · Panels / hardware / frame / upholstery
| Outer upholstery | Dark gray-green textured woven boucle-style fabric | |
|---|---|---|
| Seat cushion | Removable-looking fabric-covered foam pad over flexible support | |
| Back and side shell | Continuously upholstered curved wood or engineered-panel shell | |
| Internal frame | Kiln-dried hardwood or engineered wood frame with 25 mm nominal members | |
| Legs | Dark-stained solid hardwood tapered splayed legs | |
| Floor contacts | Rigid polymer or felt glide pads at each leg foot | |
| Seat support deck | Elastic webbing or sinuous spring deck beneath foam | |
| Back padding | Flexible polyurethane foam laminated to curved shell | |
| Fabric backing | Woven textile backing with flame-retardant treatment available by order | |
| Leg finish | Dark espresso-toned stained or lacquered wood surface | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame |
Adjustment / rotation / tilt / mobility / storage features
| Seating posture | Fixed relaxed lounge posture with 102-degree back pitch and no recline travel | |
|---|---|---|
| Back support | Continuous semicircular shell wraps laterally to provide shoulder and upper-arm enclosure | |
| Arm support | Integrated upholstered side panels provide arm-height support without adjustable arm pads | |
| Swivel function | None; chair remains stationary on four fixed wood legs | |
| Rocking function | None; straight tapered legs provide a stable fixed footprint | |
| Mobility | Lift-and-reposition chair by frame; no casters installed | |
| Cushion serviceability | Thick seat cushion may be upholstered as lift-out or fixed deck-attached unit | |
| Floor protection | Four individual glide pads spread load and reduce hard-floor scratching | |
| Assembly method | Legs attach to tapped corner plates with supplied hardware during final assembly | |
| Cleaning access | Low open base permits vacuuming under the seat with 180 mm ground clearance | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Living room reading corner | Placed as a single lounge seat beside a side table and floor lamp | |
|---|---|---|
| Bedroom dressing area | Used near a wardrobe or window for occasional seating and putting on footwear | |
| Hotel guest room | Specified in pairs or as one accent chair near a window or desk area | |
| Reception waiting area | Used in small groupings in boutique offices and lounges | |
| Retail showroom display | Positioned as an accent piece in furniture displays or lifestyle vignettes | |
| Senior living common room | Suitable for light-duration seating where soft side enclosure is preferred | |
| Residential study | Paired with a 550 mm side table for short breaks and conversation | |
| Recommended Matching Desk Size | 2.4 m executive desk |
EU Market Access Requirements* EN Standards
| Stability standard | EN 1022 applies to seating stability verification for domestic and contract use. | |
|---|---|---|
| Strength and durability standard | EN 16139 applies to non-domestic seating strength and durability where specified. |
US and Canada office-furniture standards
| Seating structural suitability | ANSI/BIFMA X5.4 applies when lounge seating is specified for commercial interiors. | |
|---|---|---|
| Static and cyclic load verification | ANSI/BIFMA X5.4 back, seat, leg and durability tests support contract procurement acceptance. | |
| Floor-protection component review | Caster/glide tests under ANSI/BIFMA X5.9 can be applied to leg glide durability requirements. |
Standards applicable to China-market projects
| Structural safety reference | GB/T 10357.2 applies to chair back and rear leg static strength acceptance testing. | |
|---|---|---|
| Seat and front stability reference | GB/T 10357.3 applies to chair seat and front static loading. | |
| Durability test reference | GB/T 10357.7 applies to repeated chair impact and fatigue evaluation. | |
| Upholstered furniture flammability review | GB 17927 applies to upholstered furniture burning behavior for China-market orders. |
This product must meet the following technical requirements: 1. Structural safety reference: GB/T 10357.2 applies to chair back and rear leg static strength acceptance testing.; 2. Seat and front stability reference: GB/T 10357.3 applies to chair seat and front static loading.; 3. Durability test reference: GB/T 10357.7 applies to repeated chair impact and fatigue evaluation.; 4. Upholstered furniture flammability review: GB 17927 applies to upholstered furniture burning behavior for China-market orders.; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
