| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 680 x 710 x 740 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Recommended live load | 160 kg | |
|---|---|---|
| Net weight | 18 kg | |
| Seat foam density | 35 kg/m3 | |
| Back foam density | 28 kg/m3 | |
| Foam rebound | 40% | |
| Static side-panel load | 120 kg | |
| Fabric abrasion acceptance | 50,000 Martindale cycles | |
| Color options | 1 visible color | |
| Occupant capacity | 1 person | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
Core acceptance fields · Panels / hardware / frame / upholstery
| Outer upholstery | Olive green velvet with woven pile and visible vertical back seam | |
|---|---|---|
| Seat padding | 100 mm polyurethane foam pad wrapped under velvet | |
| Back padding | 80 mm polyurethane foam over a rigid curved back shell | |
| Internal structural shell | 18 mm curved engineered plywood or bent composite panel | |
| Side support panels | Upholstered boxed panels forming two floor-contacting supports | |
| Lower wear surface | Concealed hard base with fabric or felt floor-protection glides recommended | |
| Panel joinery | Hidden screwed or stapled upholstered assembly with seam-aligned back joint | |
| Edge treatment | Soft rounded front waterfall edge with continuous fabric wrapping | |
| Back seam | Single vertical stitched or split-panel seam centered on the backrest | |
| Fabric thickness target | 1.2 mm face cloth over underlying padding | |
| Stitching target | 8 stitches per 25 mm seam pitch | |
| Internal frame finish | Sealed internal timber or composite components with concealed sharp edges |
Adjustment / rotation / tilt / mobility / storage features
| Seating posture | Relaxed upright lounge posture with 102-degree angled back support | |
|---|---|---|
| Entry configuration | Armless open-side geometry allowing entry from the front and both sides | |
| Support structure | Continuous curved seat-to-front panel transfers occupant load to two floor-contact sides | |
| Movement | Static non-swivel chair with no casters, tilt mechanism, or recline control | |
| Floor protection | Two concealed side-panel contact zones suitable for felt or polymer glides | |
| Upholstery maintenance | Removable access should be zippered or tool-released for professional fabric maintenance | |
| Nesting | Non-nesting fixed-profile chair with 710 mm footprint depth | |
| Arrangement flexibility | Freestanding single seat suitable for linear or paired lounge layouts | |
| Back support zone | Mid-back support extending 390 mm above the seat without a headrest | |
| Leg clearance | Central under-seat recess gives 350 mm vertical clearance and 410 mm entry depth | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg |
Verified carton / gross weight / assembly / loading data
| Carton dimensions | 760 x 790 x 820 mm | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Office lounge | Reception or staff lounge seating for short meetings and informal waiting | |
|---|---|---|
| Hotel public area | Lobby, suite, or corridor accent chair where a soft tailored silhouette is required | |
| Residential living room | Bedroom corner or living-room occasional seat for one adult | |
| Restaurant waiting zone | Paired seating near host stands or cocktail waiting areas | |
| Showroom staging | Accent chair in model homes, retail displays, or interior vignettes | |
| Senior workspace breakout | Single seat in quiet phone-call or reading corners | |
| Recommended grouping | Place two units with a 500 mm side table for a compact conversation set | |
| Recommended Matching Desk Size | 2.4 m executive desk |
EU Market Access Requirements* EN Standards
| Furniture strength suggestion | EN 16139 non-domestic seating strength, durability, and safety test level 2 | |
|---|---|---|
| Upholstery flammability suggestion | EN 1021cigarette ignition resistance for upholstered seating |
US and Canada office-furniture standards
| Lounge seating durability suggestion | ANSI/BIFMA E3 Lounge and Public Seating durability and structural tests | |
|---|---|---|
| Static load suggestion | ANSI/BIFMA E3 static vertical seat load at the selected contract test level | |
| Stability suggestion | ANSI/BIFMA E3 forward and rearward stability checks |
Standards applicable to China-market projects
| Furniture safety suggestion | GB/T 10357.2 furniture mechanical test for seat and back strength | |
|---|---|---|
| Upholstered furniture flammability suggestion | GB 17927 upholstered furniture fire safety assessment | |
| Fabric colorfastness suggestion | GB/T 3920 textile colorfastness to rubbing test method | |
| Formaldehyde suggestion | GB 18584 indoor decorative materials limit for wood-based furniture |
This product must meet the following technical requirements: 1. Furniture safety suggestion: GB/T 10357.2 furniture mechanical test for seat and back strength; 2. Upholstered furniture flammability suggestion: GB 17927 upholstered furniture fire safety assessment; 3. Fabric colorfastness suggestion: GB/T 3920 textile colorfastness to rubbing test method; 4. Formaldehyde suggestion: GB 18584 indoor decorative materials limit for wood-based furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
