| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Leg diameter | 100 mm | |
|---|---|---|
| Chair leg diameter | 100 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Recommended user weight capacity | 130 kg | |
|---|---|---|
| Static seat verification load | 195 kg | |
| Chair net weight | 16 kg | |
| Seat foam density | 35 kg/m3 | |
| Back foam density | 28 kg/m3 | |
| Foam compression set | 4 percent | |
| Seating capacity | 1 adult | |
| Ottoman foot load capacity | 60 kg | |
| Fabric abrasion acceptance | 50,000 Martindale cycles | |
| Foam rebound | 40 percent |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Outer upholstery | Cream-white boucle-style woven fabric with visible looped texture | |
|---|---|---|
| Seat cushion core | High-resilience polyurethane foam, target density 35 kg/m3 | |
| Cylindrical backrest padding | Soft polyurethane foam wrapped around a rigid tube frame | |
| Internal load frame | Kiln-dried hardwood or engineered timber support frame, nominal 30 mm members | |
| Chair support legs | Four cylindrical timber legs fully wrapped in matching cream fabric | |
| Ottoman support legs | Four short cylindrical timber legs fully upholstered in matching fabric | |
| Under-seat support board | 12 mm plywood or engineered wood load board | |
| Edge finishing | Sewn fabric seam around the seat cushion perimeter with rounded upholstered edge | |
| Back support post | Fabric-covered rigid vertical post joining seat frame to cylindrical back rail | |
| Dark throw accessory | Dark charcoal soft woven or knitted throw blanket | |
| Ottoman cushion | Matching cream boucle-style fabric over rounded foam pad | |
| Floor contact base | Fabric-wrapped leg bottoms without visible glides |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating posture | Low relaxed lounge posture with 380 mm seat height and 560 mm seat depth | |
|---|---|---|
| Back support | Single horizontal cylindrical rail provides upper-back contact without recline adjustment | |
| Arm support function | Continuous rounded back rail extends outward to 620 mm width for partial side support | |
| Ottoman function | Separate matching footrest supports leg elevation at a 420 mm top height | |
| Mobility | Non-swivel, non-tilting stationary chair moved by lifting; total target weight 16 kg | |
| Assembly method | Legs attach or bolt to the under-seat frame; back support ships aligned or bolted as a component | |
| Floor protection requirement | Fit 100 mm diameter felt or polymer glides under each fabric-wrapped leg | |
| Cushion retention | Fixed upholstered cushion attached to the seat frame rather than a removable cover | |
| Cleaning access | Surface vacuuming and spot cleaning through the woven outer face; removable cover is not visible | |
| Configurability | Chair and ottoman can be used as a paired set or separated into independent lounge pieces | |
| Side support | Rounded rail ends provide partial left-right body containment at 270 mm above the seat | |
| Ottoman leg rest | Separate 390 mm high footrest supports leg elevation and 60 kg foot load |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Living room lounge area | One chair plus ottoman placed beside a sofa for reading or phone use at 380 mm seat height | |
|---|---|---|
| Bedroom dressing corner | Positioned near a wardrobe or window as a single-seat relaxation and dressing position | |
| Hotel guest room | Use as an occasional lounge seat with ottoman in a 4 star or boutique room seating zone | |
| Reception breakout space | Place pairs around low tables in quiet lounge or waiting corners for 1 adult per chair | |
| Photo or showroom styling | Use the cream upholstery and dark throw as a display set for modern interior merchandising | |
| Home office relaxation corner | Place away from a desk for short breaks rather than 8 hour task seating | |
| Senior living common area | Specify only in supervised lounge settings with 130 kg capacity and glided stationary legs | |
| Recommended Matching Desk Size | 2.4 m executive desk |
EU Market Access Requirements* EN Standards
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.4 |
|---|
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
