| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 740 x 680 x 760 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Recommended user weight | 120 kg | |
|---|---|---|
| Net weight | 18 kg | |
| Seat load area | 0.30 m2 | |
| Seat foam density | 35 kg/m3 | |
| Back foam density | 30 kg/m3 | |
| Foam rebound | 40% | |
| Recommended daily usage | 8 hours | |
| Static proof load | 180 kg | |
| Color count | 1 | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
Core acceptance fields · Panels / hardware / frame / upholstery
| Outer upholstery | Ivory boucle-style woven pile fabric with visible soft looped texture; exact fiber blend requires supplier BOM confirmation | |
|---|---|---|
| Seat cushion | Padded upholstered cushion with 100 mm target foam thickness and concealed support board | |
| Back and arm shell | Continuous padded shell forming the arched back and arms, based on visible seamless upholstered geometry | |
| Internal frame | Hardwood or bent plywood supporting frame is structurally expected but hidden and requires BOM confirmation | |
| Seat support board | 12 mm plywood or engineered board target beneath the cushion for shape retention and load distribution | |
| Vertical supports | Four thick integrated upholstered legs/supports connected to the seat and arm shell | |
| Fabric backing | Woven backing textile recommended under the face fabric to stabilize pile and reduce seam distortion | |
| Edge tailoring | Sewn upholstery with close-fitting edges around the curved arms and vertical support seams | |
| Frame surface treatment | Hidden timber components should use low-emission bonded board and sealed edges; not visible in the image | |
| Foot protection | Plastic or felt glides are recommended on the four support bases to protect hard floors | |
| Stitching detail | Target seam pitch 8 stitches per 100 mm along curved upholstery joints, subject to factory sample approval | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board |
Adjustment / rotation / tilt / mobility / storage features
| Seating posture | Low relaxed lounge posture with 430 mm seat height and 540 mm seat depth for reception or living spaces | |
|---|---|---|
| Integrated arm support | Continuous arched arms extend from the back into the front supports at 650 mm floor height | |
| Open-back geometry | Rear side cut-out creates a sculptural visual void while retaining a wraparound back and arm support | |
| Fixed construction | No recline, swivel, height adjustment or moving mechanism is visible; the chair is a static upholstered lounge seat | |
| Four-point support | Two front and two rear integrated supports provide direct floor contact and stable footprint | |
| Stacking compatibility | Not stackable due to the continuous wraparound arms and wide sculptural frame | |
| Cleaning access | Open lower side voids permit floor cleaning access beneath and around the seat without moving the chair far | |
| Upholstery maintenance | Removable upholstery is not visually confirmed; maintenance should use fabric vacuuming and low-moisture spot cleaning | |
| Floor protection | Glides should be fitted to each support base to distribute load and reduce scratching on hard flooring | |
| Seat replacement | Cushion access and replaceability require supplier construction confirmation because no fasteners are visible | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg |
Verified carton / gross weight / assembly / loading data
| Gross weight | 24 kg | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Lounge area | Suited to hotel lobbies and resident lounges because the low padded seat supports relaxed waiting | |
|---|---|---|
| Reception setting | Pairs beside a compact side table for visitor seating in showrooms, studios and boutique reception areas | |
| Residential living room | Works as a sculptural accent chair near a sofa, window or coffee table in modern interiors | |
| Bedroom dressing zone | Fits a vanity or bedroom corner where arms and a 430 mm seat height provide relaxed seated support | |
| Hospitality corner | Suitable for cafe lounges and tea rooms using fixed, non-swivel seating around small tables | |
| Pairing configuration | Can be specified in pairs opposite a coffee table to create a compact conversation area | |
| Floor compatibility | Recommended for carpet, wood, tile or stone floors with supplier-fitted felt or polymer glides | |
| Recommended Matching Desk Size | 2.4 m executive desk |
EU Market Access Requirements* EN Standards
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.4 |
|---|
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
