| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1620 x 2120 x 1180 mm | |
|---|---|---|
| Recommended mattress size | 1500 x 2000 mm | |
| Headboard thickness | 150 mm | |
| Footboard height | 380 mm | |
| Mattress support platform height | 300 mm | |
| Underbed storage clearance | 250 mm | |
| Headboard ear protrusion width | 120 mm each | |
| Slat thickness | 18 mm | |
| Slat spacing | 70 mm | |
| Support leg height | 150 mm | |
| Bed rail height above slat | 80 mm | |
| Side Rail Thickness | 40 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Total static weight capacity | 363 kg | |
|---|---|---|
| Per drawer static load | 15 kg | |
| Product net weight | 90 kg | |
| Recommended maximum user weight | 120 kg | |
| Upholstery abrasion resistance | 30000 cycles | |
| Drawer slide cycle rating | 10000 cycles | |
| Recommended mattress thickness | 220 mm | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg | |
| Recommended Procurement Warranty | Frame 10 years; hardware 5 years; upholstery 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Headboard outer upholstery | Blush pink short-pile velvet fabric | |
|---|---|---|
| Headboard inner frame | Solid pine + 15mm MDF structural panel | |
| Headboard padding | 25mm high-density polyurethane foam | |
| Bed frame base slats | Solid poplar bent slats | |
| Support legs | 1.2mm thick matte black powder-coated steel | |
| Footboard pull handle | 20mm wide matte black metal bar | |
| Drawer construction | 12mm plywood drawer box with silent ball-bearing slides | |
| Monkey facial applique | Embroidered/heat-bonded fabric details | |
| Bed side rails | Upholstered MDF rails wrapped in matching blush fabric | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
| Underbed storage | One full-width pull-out drawer on metal slides, accessible via footboard handle | |
|---|---|---|
| Slat support system | Fixed pre-assembled slat roll with 3 center support legs for even weight distribution | |
| Headboard bump protection | Fully padded rounded edges and protruding ears to prevent child impact injury | |
| Mattress compatibility | Fits standard 1500x2000mm mattresses 220 mm thick without box spring | |
| Bed frame assembly | Knock-down assembly with included hex key and hardware, 2-person setup | |
| Surface maintenance | Stain-resistant fabric surface wipeable with mild detergent for child spill cleanup | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Girls' bedroom application | Suitable for 12 year old children in private residential bedrooms, playful cartoon aesthetic | |
|---|---|---|
| Small apartment layout fit | Low profile platform design with integrated storage to save floor space | |
| Matching furniture bundle | Pairs with matching 2-drawer pink nightstands for coordinated room set | |
| Preschool to teen use | 1500mm width supports use from early childhood through teenage years | |
| Soft injury prevention | Fully upholstered edges eliminate hard corner impact risks for active children |
EU Market Access Requirements* EN Standards
| EN 747-1:2012+A1:2015 | Furniture - Bunk beds and high beds for domestic use - Safety requirements, for structural safety reference | |
|---|---|---|
| EN 1022:2018 | Furniture - Seating - Determination of stability, applicable for bed stability verification |
Standards applicable to China-market projects
| GB 28007-2011 | General safety technical code for children's furniture, applicable for structural safety testing | |
|---|---|---|
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for frame and panel performance | |
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of harmful substances of wooden furniture |
This product must meet the following technical requirements: 1. GB 28007-2011: General safety technical code for children's furniture, applicable for structural safety testing; 2. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for frame and panel performance; 3. GB 18584-2001: Indoor decorating and refurbishing materials - limit of harmful substances of wooden furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
