| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall workstation footprint | 1400 x 700 x 1500 mm | |
|---|---|---|
| Rectangular work surface | 1400 x 700 mm | |
| Finished work surface height | 750 mm | |
| Desktop thickness | 25 mm | |
| Total privacy panel height | 1500 mm | |
| Panel height above work surface | 750 mm | |
| Lower solid modesty panel height | 400 mm | |
| Upper privacy panel visible height | 350 mm | |
| Front knee opening width | 1200 mm | |
| Minimum knee clearance under desktop | 680 mm | |
| Seating entry opening width | 1400 mm | |
| Leveler foot adjustment | 20 mm | |
| Panel frame profile width | 40 mm | |
| Side panel depth | 700 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Desktop static load capacity | 91 kg | |
|---|---|---|
| Uniform desktop distributed load | 150 kg/m2 | |
| Net weight | 62 kg | |
| Single-user capacity | 1 person | |
| Panel connector static stability load | 40 kg per joint | |
| Leveler foot point load | 35 kg per foot | |
| Surface impact acceptance | 2 kg dropped from 150 mm | |
| Recommended daily load distribution | Two 24 in monitors plus 10 kg accessories | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Work surface substrate | 25 mm wood-composite panel | |
|---|---|---|
| Work surface facing | Light wood-look melamine or laminate finish | |
| Impact-resistant desktop edge | PVC or ABS edge banding, 2 mm nominal | |
| Rear and side panel faces | Fabric-covered or laminate panel board | |
| Privacy panel core | Composite board or lightweight honeycomb panel | |
| Partition support frame | Dark gray powder-coated metal or aluminum extrusion | |
| Panel joining hardware | Steel or zinc-alloy corner connectors and rail fasteners | |
| Under-desk support | Dark gray steel vertical legs with horizontal stretcher rail | |
| Leveling feet | Nylon-pad adjustable glides with threaded steel stems | |
| Cable port | Recessed oval plastic desktop cable cover with brush or slide opening | |
| Fastener pack | Zinc-plated steel bolts, cam locks and connecting plates | |
| Surface finish color mix | Pale oak-look top, terracotta lower band, off-white upper band and dark gray frame |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Three-sided privacy arrangement | Rear, left and right panels form a U-shaped visual boundary while the front remains open for entry | |
|---|---|---|
| Seated computer work layout | Single 1400 x 700 mm surface faces the open front with screen panels behind and beside the user | |
| Cable routing | Rear oval desktop port routes monitor and power cables toward the back panel zone | |
| Modular panel connection | Rails, posts and corner connectors allow the screen set to be assembled or reconfigured in straight runs | |
| Leveling adjustment | Threaded glides at exposed feet correct uneven floors without cutting or shimming the panels | |
| Under-desk privacy | Solid lower panels below the work surface conceal the user’s legs from side and rear sight lines | |
| Accessories shown | Laptop, spiral notebook and pen demonstrate writing and notebook-computer use; they are not included furniture hardware | |
| Storage provision | No drawers, pedestal, doors or shelves are integrated into the pictured workstation | |
| Knockdown installation | Desktop, panels, posts, legs and hardware ship separately and assemble with mechanical fasteners | |
| Layout extension | The framed end posts permit linking additional identical stations for project rows when compatible panels are specified | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Open-plan office seat | Suitable for individual focused work in call centers, admin floors and accounting departments | |
|---|---|---|
| Temporary project team area | Useful when several identical units are linked into rows for short-term project staffing | |
| School or hospital administration office | Fits computer-based registration, records and clerical tasks requiring one defined workstation | |
| Small private office workstation | Provides an organized single-user desk without consuming space for a full built-in office | |
| Shared hot-desk neighborhood | Can be assigned by shift while maintaining personal visual separation and cable routing | |
| Reception back-office area | Suitable for behind-counter administrative computing rather than public-facing reception service |
EU Market Access Requirements* EN Standards
| EN 527-1 office work tables | Defines safety, strength and dimensional requirements for non-domestic office desks | |
|---|---|---|
| EN 527-2 mechanical safety tests | Provides strength, durability and stability test methods for office work tables | |
| EN 1022 seating and table stability | Useful stability reference when the complete workstation is specified with an office chair | |
| EN 13986 wood-based panels | Covers panel characteristics relevant to desktop and partition board substrates |
US and Canada office-furniture standards
| ANSI/BIFMA X5.5 Desk Products | Recommended strength, durability and structural performance standard for the desktop and frame | |
|---|---|---|
| BIFMA e3 level sustainability criteria | Optional procurement framework for panel, metal and packaging environmental attributes | |
| ANSI/BIFMA X5.9 Storage Accessories | Applicable only if an optional mobile pedestal or storage unit is added | |
| BIFMA G1 ergonomic guideline | Supports checking 750 mm work height with task chair and keyboard equipment |
Standards applicable to China-market projects
| GB/T 3324-2017 general technical requirements | Applies to wooden furniture dimensions, workmanship and inspection of the board work surface | |
|---|---|---|
| GB/T 3325-2017 metal furniture requirements | Applies to metal structural parts, coating integrity and stability requirements | |
| GB 18580-2017 formaldehyde emission | Recommended acceptance basis for wood-based panels used in the desktop and panel cores | |
| GB/T 10357.6-2013 desk static load test | Suggested test method for verifying worktop and support strength | |
| GB/T 10357.7-2013 furniture stability | Suggested basis for evaluating panel-and-leg workstation stability |
This product must meet the following technical requirements: 1. GB/T 3324-2017 general technical requirements: Applies to wooden furniture dimensions, workmanship and inspection of the board work surface; 2. GB/T 3325-2017 metal furniture requirements: Applies to metal structural parts, coating integrity and stability requirements; 3. GB 18580-2017 formaldehyde emission: Recommended acceptance basis for wood-based panels used in the desktop and panel cores; 4. GB/T 10357.6-2013 desk static load test: Suggested test method for verifying worktop and support strength; 5. GB/T 10357.7-2013 furniture stability: Suggested basis for evaluating panel-and-leg workstation stability; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp
