Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	2400 × 2400 × 1100 mm
Overall assembled dimensions	2400 x 2400 x 1100 mm
Single worktop dimensions	1200 x 600 x 750 mm
Seated knee clearance height under worktop	600 mm
Knee clearance depth under worktop	450 mm
Partial privacy partition total height	1100 mm
Desktop thickness	38 mm
Partition panel thickness	32 mm
Mobile pedestal dimensions	400 x 500 x 600 mm
Partition metal frame profile width	30 mm
Cable grommet diameter	60 mm
Adjustable foot height range	15 mm
Worktop edge overhang	20 mm
Primary Component Thickness	40 mm according to load-bearing role
Hardware / Moving-part Clearance	5 mm operating clearance

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Total workstation static load capacity	260 kg
Worktop surface scratch resistance	2000 cycles
Worktop water and stain resistance rating	Level 2
Workstation net weight (excluding pedestals)	115 kg
Included mobile pedestal gross weight per unit	35 kg
Maximum recommended user weight per seat	120 kg
Hardware cycle life for drawer slides	50000 open/close cycles
Reference Static Load	150 kg depending on category
Moving-part Durability Reference	Acceptance target 50000 cycles
Recommended Procurement Warranty	Structure 5 years; hardware 3 years

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Worksurface core and finish	E1-grade MFC particleboard with light oak melamine laminate
Worktop edge treatment	2mm thick PVC edge banding sealed on all sides
Partition frame construction	Powder-coated gray steel rectangular tubing
Partition infill panels	Double-sided fabric-wrapped MDF core panels with white accent strips
Mobile pedestal body construction	0.8mm thick cold-rolled steel with white powder-coated finish
Drawer caster wheels	50mm diameter hard nylon swivel casters (2 locking per pedestal)
Leveling feet components	Nylon base with steel threaded adjustment stem
Cable management grommets	ABS plastic flip-top grommets with black finish
Fastener hardware	Zinc-plated steel screws and connection brackets
Lock system for pedestals	Central keyed cam lock securing all drawers per unit
Primary Connector Specification	Reference M6-M10 with at least 2 fixing points at major joints
Reference Finish / Color Count	Recommended 6finish options

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Dual independent work zones	Two separated work surfaces with partial dividers for side-by-side staff use
Mobile under-desk storage	Two rolling 3-drawer pedestals that slide fully under each work surface
Integrated cable management	Flip-top grommets on each worktop for routing monitor and power cables
Floor level adjustment	Threaded adjustable feet at all frame base points
Modular reconfiguration capability	Bolt-together frame connections allow expansion to larger cubicle clusters
Partial seated privacy	1100mm tall partitions block direct line of sight between seated users
Pedestal mobility lock	Two locking casters per pedestal hold the cabinet in fixed position
Sound dampening partition surface	Fabric-wrapped infill panels reduce reflected office noise between seats
Reference Adjustment / Operating Range	100 mm or 120° where applicable

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Packaging Volume	0.8 m³/set
Reference Packaged Gross Weight	120 kg/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Open plan office staff work areas	Two-seat cross layout for dense, space-efficient team seating
Small business startup offices	Compact footprint fits two workers without dedicated private offices
Call center and shared workspace	Partial dividers reduce distraction between adjacent workers
Temporary office expansion projects	Knock-down design allows quick assembly and reconfiguration
Administrative department work zones	Included lockable mobile pedestals provide personal document storage
Satellite office locations	Flat packed shipping reduces freight cost for remote office setups

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

Office furniture work surface strength requirement	EN 527:2002+A1:2019
Office furniture stability standard	EN 14073:2004
Office furniture fire performance	EN 1021:2014

STANDARD S2

North America Purchasing & Inspection Reference * ANSI/BIFMA Standards

US and Canada office-furniture standards

Office desk performance standard	ANSI/BIFMA X2021
Mobile storage pedestal standard	ANSI/BIFMA X2019

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

Office furniture desk structural requirement	GB/T 3324
Wood-based panel formaldehyde emission limit	GB 18580
Office furniture stability requirement	GB/T 10357.7

Standardized tender description text

This product must meet the following technical requirements:
1. Office furniture desk structural requirement: GB/T 3324;
2. Wood-based panel formaldehyde emission limit: GB 18580;
3. Office furniture stability requirement: GB/T 10357.7;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · CW-2P-X1412-OK

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · CW-2P-X1412-OK

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · CW-2P-X1412-OKOpen Export Tool

Quick Actions

Post an RFQ

Product Description

The 2-Person Cross-Shaped Modular Office Cubicle Workstation Desk with Mobile Pedestals, model CW-2P-X1412-OK from an unbranded line, delivers a modern, space-efficient two-seat work solution anchored in a symmetrical cross-layout design. The unit features two independent work surfaces positioned at right angles, separated by 1100mm tall partitions that create partial seated privacy by blocking direct line of sight between adjacent users. Each partition is framed with powder-coated gray steel rectangular tubing, filled with double-sided fabric-wrapped MDF core panels accented with white strips for a clean, professional visual profile. The light oak melamine laminated worktops are finished with 2mm thick PVC edge banding sealed on all sides, sitting atop a connected frame with nylon leveling feet at every base point to accommodate uneven flooring. Work surfaces are constructed from E1-grade MFC particleboard, supported by a sturdy frame that holds a total static load of 260kg, with a maximum recommended user weight of 120kg per seat. Each worktop includes a black ABS plastic flip-top cable management grommet to neatly route monitor and power cords, cutting down on desktop clutter. The workstation comes paired with two matching steel mobile file pedestals, built from 0.8mm thick cold-rolled steel with a white powder-coated finish. Each pedestal has three drawers, rolling on 50mm hard nylon swivel casters with two locking casters per unit to hold the cabinet in place when needed; both pedestals slide fully under their respective work surfaces to save floor space, with drawer slides rated for extensive repeated use. Bolt-together frame connections support straightforward modular reconfiguration, allowing teams to expand the unit into larger connected cubicle clusters as seating needs evolve. This workstation fits a wide range of commercial settings, including open-plan office staff zones where dense, space-efficient team seating is a priority, small startup offices that lack dedicated private office space, call centers and shared workspaces where reduced adjacent distraction supports focus, temporary office expansion projects that benefit from quick assembly, administrative departments requiring accessible personal document storage, and satellite office locations where flat-packed shipping lowers freight costs. When procuring this unit, note that each set ships in two flat cartons, with a packaged gross weight of 120kg, and requires 40 minutes of assembly time per set. Buyers should also account for the unit’s fixed overall assembled footprint when planning space layouts, and confirm that the provided under-desk knee clearance aligns with intended user needs before placing bulk orders.

2-Person Cross-Shaped Modular Office Cubicle Workstation Desk with Mobile Pedestals Specifications

Suppliers and stock