| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall footprint | 2400 x 1200 x 1100 mm | |
|---|---|---|
| Individual work surface | 1200 x 600 mm per user | |
| Finished work surface height | 750 mm | |
| Work surface thickness | 28 mm | |
| Edge banding thickness | 3 mm | |
| Back privacy screen height above floor | 1100 mm | |
| Screen height above desktop | 350 mm | |
| Center divider width per station | 600 mm | |
| Privacy panel thickness | 51 mm | |
| Front modesty panel height | 450 mm | |
| Seated knee opening width | 1100 mm per station | |
| Seated knee clearance depth | 600 mm | |
| Underside knee clearance height | 680 mm | |
| Support post section | 40 x 40 x 1.2 mm square tube | |
| Leveling glide adjustment | 20 mm | |
| Recommended chair footprint per bay | 650 x 650 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Product net weight | 120 kg | |
|---|---|---|
| Distributed static load per work surface | 100 kg | |
| Concentrated desktop load | 40 kg at one point | |
| Supported users | 2 seated users | |
| Panel tacking capacity | Light paper and memo use with pins or hook-and-loop pads | |
| Frame lateral stability rating | 2 percent of system weight applied at panel top | |
| Leveling glide load capacity | 60 kg per glide | |
| Surface vertical deflection under rated load | 3 mm maximum | |
| Adjustment cycles per leveling glide | 1000 cycles | |
| Warranty duration | 5 years |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Work surface substrate | 18 mm MFC particleboard core under laminate face | |
|---|---|---|
| Work surface finish | High-pressure laminate or melamine laminate in light neutral tone | |
| Edge protection | 3 mm PVC or ABS impact-resistant edge banding | |
| Upper privacy panels | Fabric-faced composite board in light gray | |
| Terracotta accent band | Fabric or laminate-covered panel strip with dark perimeter trim | |
| Lower modesty panels | Light gray composite board with dark horizontal trim rails | |
| Structural support frame | Powder-coated square steel tube, 40 x 40 x 1.2 mm | |
| Vertical panel posts | Dark gray aluminum extrusions or powder-coated steel sections | |
| Panel core option | Foam-padded MDF or compact composite tackable core | |
| Feet and glides | Injection-molded plastic bases with steel threaded stems | |
| Fasteners and brackets | Zinc-plated steel connector plates, cam bolts and corner brackets | |
| Color offer | 2 standard colorways: light gray with terracotta accent or all-gray |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Two independent work bays | Two 1200 mm wide seated stations are separated by a center divider for side-by-side staff use | |
|---|---|---|
| Low privacy screening | 350 mm high back screen above desktop reduces visual distraction without blocking room visibility | |
| Modular panel connection | Posts connect back, center and side panels with brackets to form a straight two-seat run | |
| Floor leveling | Threaded glides provide 20 mm vertical compensation for uneven office floors | |
| Front modesty coverage | 450 mm solid lower panels conceal legs and cable clutter from the aisle | |
| Open chair access | Each station provides an open 1100 x 600 mm knee bay without built-in drawers | |
| Cable management provision | One 60 mm desk grommet per user can be fitted at the rear work surface | |
| Panel expansion | The post system can extend to additional straight bays using matching panel connectors | |
| Storage compatibility | Mobile pedestals up to 400 mm wide fit under each work surface without blocking the knee opening | |
| Power readiness | Horizontal raceway covers can accommodate one 3-socket strip per station when wired on site | |
| Installation method | Knock-down assembly using cam connectors, support posts, screws and leveling feet | |
| Restacking limitation | Panels reconfigure by disassembly and bracket relocation; they are not sliding or folding partitions |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Packaging form | 4 flat-pack cartons plus one hardware carton, palletized for freight | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | Main top 2500× 1050× 350 mm; return/pedestal packed separately | |
| Reference Packaged Gross Weight | 180 kg/set in 4 cartons | |
| Reference Packaging Volume | 1 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Open-plan office | Creates two defined staff seats in one 2400 mm linear run for dense team layouts | |
|---|---|---|
| Call center | Low screens provide visual separation while preserving supervisor visibility and quick communication | |
| Administration area | Supports laptop, paperwork and phone tasks on two independent 1200 x 600 mm surfaces | |
| Finance or HR shared workstation | Separates adjacent users with a center divider for document privacy during routine work | |
| Project team zone | Can be repeated in straight runs to create standardized bench-style neighborhoods | |
| Temporary staffing layout | Knock-down construction and leveling feet support reconfiguration on standard raised or carpeted floors | |
| Hot-desking neighborhood | Pairs two users without assigned storage, leaving space for mobile pedestals when needed | |
| Educational staff room | Provides compact seated computer workstations for teachers or administrative operators |
EU Market Access Requirements* EN Standards
| EN 527-1:2011 | Defines safety, strength and dimensional requirements for office desks and work surfaces | |
|---|---|---|
| EN 527-2:2011 | Provides mechanical safety, durability and stability test methods for office desks | |
| EN 1022:2018 | Specifies seating stability, relevant when validating chair-and-workstation interaction | |
| EN 13986:2004+A1:2015 | Covers wood-based panels for construction and furniture performance classification |
US and Canada office-furniture standards
| ANSI/BIFMA X5.5-2021 | Office desk static, vertical, horizontal and durability tests apply to the work surfaces | |
|---|---|---|
| ANSI/BIFMA X5.6-2022 | Panel systems test guidance applies to screens, connections and freestanding system stability | |
| ANSI/BIFMA e3-2019 | Use as optional sustainability, material and chemical reporting framework |
Standards applicable to China-market projects
| GB/T 3324-2017 | Use for general wooden furniture dimensions, workmanship and inspection of wood-based work surfaces | |
|---|---|---|
| GB/T 3325-2017 | Use for metal furniture strength, dimensional and surface-quality checks on steel supports | |
| GB 18580-2017 | Use formaldehyde emission limits for wood-based panel substrates at E1 or lower | |
| GB/T 10357.5-2011 | Use desk strength and load test methods to validate the 100 kg desktop rating | |
| GB/T 10357.7-2013 | Use furniture stability test method to assess tipping and lateral stability |
This product must meet the following technical requirements: 1. GB/T 3324-2017: Use for general wooden furniture dimensions, workmanship and inspection of wood-based work surfaces; 2. GB/T 3325-2017: Use for metal furniture strength, dimensional and surface-quality checks on steel supports; 3. GB 18580-2017: Use formaldehyde emission limits for wood-based panel substrates at E1 or lower; 4. GB/T 10357.5-2011: Use desk strength and load test methods to validate the 100 kg desktop rating; 5. GB/T 10357.7-2013: Use furniture stability test method to assess tipping and lateral stability; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp
