Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Finished Top Thickness	50 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Work surface distributed load	80 kg per seat
Mobile pedestal load capacity	30 kg total
Drawer slide dynamic load	15 kg per drawer
Caster load rating	30 kg per set of 4
Partition lateral stability target	20 kg horizontal force at 1000 mm height
Seating capacity	2 users
Product net weight	95 kg
Floor loading	39.6 kg per square meter
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Work surface	25 mm melamine-faced particleboard with matching light oak grain and impact-sealed edge banding
Partition lower panels	Wood-composite core with beige fabric-laminate privacy facing inside dark aluminum rails
Upper screen section	Translucent ribbed acrylic or polycarbonate light panel in an aluminum frame
Screen frame and posts	Dark gray powder-coated extruded aluminum sections with visible corner connectors
Under-worktop support	Dark gray powder-coated steel beam and vertical end supports forming the rear modesty structure
Mobile pedestal	Light oak melamine cabinet body, black side/back panel, white drawer pull, lock, and four twin-wheel casters

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Workstation configuration	Two face-to-face seated positions separated by a central low partition, with end screens providing side privacy
Cable management	One 60 mm round grommet routes monitor and power cables from the work surface into the rear support zone
Storage and mobility	Mobile pedestal provides one lockable upper drawer and one lower cabinet or file compartment on four swivel casters
Privacy and light control	Lower opaque panels block sightlines while the upper translucent strip retains borrowed light between workstations

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Number of packages	4 cartons
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	Main top 2500× 1050× 350 mm; return/pedestal packed separately
Reference Packaged Gross Weight	180 kg/set in 4 cartons
Reference Packaging Volume	1 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Open-plan office	Suitable for administrative and clerical teams needing two defined seats, visual privacy, and shared footprint efficiency
Back-office or processing center	Suits document, computer, and telephone workflows because each seat has a 1200 mm top, grommet, and lockable mobile storage

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 527-1:2011+A1:2019	Office work tables and desks, safety and dimensional requirements for the work surfaces.
EN 527-2:2002+A1:2019	Mechanical safety requirements for office work tables, applicable to load and stability verification.
EN 1023-1:1996	Office storage furniture dimensional requirements, applicable to the mobile pedestal.
EN 1023-2:2000	Office storage furniture safety requirements, applicable to drawer, lock, and tip-over checks.
EN 13986:2004+A1:2015	Wood-based panels for construction and furniture use, applicable to board performance documentation.

STANDARD S2

North America Purchasing & Inspection Reference * ANSI/BIFMA Standards

US and Canada office-furniture standards

North America procurement and testing reference	Recommended references: ANSI/BIFMA X5.5

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to the melamine worktops and pedestal cabinet.
GB/T 3325-2017	General technical requirements for metal furniture, applicable to steel supports and aluminum screen framing.
GB/T 3326-2016	Furniture dimensional coordination, applicable to desk height, clearances, and seated-use verification.
GB 18580-2017	Formaldehyde emission limit for wood-based panels, applicable to particleboard components and laminates.
GB/T 10357.5-2011	Furniture surface physicochemical test for paint or film hardness, applicable as a laminate-surface acceptance reference.

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to the melamine worktops and pedestal cabinet.;
2. GB/T 3325-2017: General technical requirements for metal furniture, applicable to steel supports and aluminum screen framing.;
3. GB/T 3326-2016: Furniture dimensional coordination, applicable to desk height, clearances, and seated-use verification.;
4. GB 18580-2017: Formaldehyde emission limit for wood-based panels, applicable to particleboard components and laminates.;
5. GB/T 10357.5-2011: Furniture surface physicochemical test for paint or film hardness, applicable as a laminate-surface acceptance reference.;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · WS-P2F-2400-MP

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · WS-P2F-2400-MP

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · WS-P2F-2400-MPOpen Export Tool

Quick Actions

Post an RFQ

Product Description

The Two-Person Face-to-Face Partition Workstation with Mobile Pedestal is an unbranded office cubicle desk configured for two users in opposing seated positions. Its layout balances shared footprint efficiency with personal separation: a central low partition runs between the two work zones, while end screens add side privacy. The lower partition uses opaque panels to block direct sightlines, and the upper translucent ribbed acrylic or polycarbonate strip preserves borrowed light across the workstation. Dark gray powder-coated aluminum posts and frames, visible corner connectors, light oak grain surfaces, and beige fabric-laminate privacy facing create a structured commercial appearance. Construction combines panel, metal, and composite elements. The work surface is 25 mm melamine-faced particleboard with matching light oak grain and impact-sealed edge banding, presented with a finished top thickness of 50 mm. Partition lower panels use a wood-composite core set within dark aluminum rails. The frame and trim are extruded aluminum, while a dark gray powder-coated steel beam and vertical end supports sit beneath the worktop and form the rear modesty structure. Each main seat provides effective knee clearance of 680 mm in height and 900 mm in width, with a main support section of 80 mm and 2 mm metal wall thickness. Practical features support daily desk-based work. A 60 mm round cable grommet on each surface routes monitor and power cords into the rear support zone, which accommodates an 80 mm cable opening and a cable tray depth of 120 mm. The included mobile pedestal has a light oak melamine body, black side and back panels, a white drawer pull, a lock, and four twin-wheel swivel casters. It offers one lockable upper drawer and one lower cabinet or file compartment, allowing users to move personal or work materials beside either seat as needed. Rated seating capacity is two users, with work surface distributed load capacity of 80 kg per seat; pedestal capacity is 30 kg total, drawer slide dynamic capacity is 15 kg per drawer, and caster capacity is 30 kg per set of four. This workstation is well suited to open-plan offices, administrative and clerical areas, back-office teams, and processing centers where computer, telephone, and document tasks require defined seating, visual privacy, and compact shared space. It also fits residential settings used as a dual study or administrative workspace where a more commercial-style layout is acceptable. Procurement planning should account for site access, floor protection, and assembly coordination, as the set is supplied in multiple cartons and requires assembly. Buyers should also confirm power and data routing requirements, pedestal placement within the knee space, floor surface suitability for casters, and whether the light oak, dark gray frame, and beige partition palette aligns with the interior scheme.

Two-Person Face-to-Face Partition Workstation with Mobile Pedestal Specifications

Suppliers and stock