Cross-Shaped 4-Person Modular Office Cubicle Workstation (model CUB-4P-CROSS-2830) is listed under L-Shaped Office Desk, with overall dimensions of 2830 × 2830 × 1200 mm and main material of Particle‑board (PB). Load capacity: 91 kg. Certifications: modular,open-plan,furniture,partial-height,seated,privacy,dividers,integrated,cable,management. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Primary Component Thickness | 40 mm according to load-bearing role | |
|---|---|---|
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Static load capacity per work surface | 91 kg | |
|---|---|---|
| Surface scratch resistance | Class 2 | |
| Hardware salt spray corrosion resistance | 48 hours | |
| Seating capacity | 4 users | |
| Total product gross weight (unit only) | 200 kg | |
| Manufacturer warranty period | 10 years | |
| Modesty panel height under desktop | 400 mm | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Work surface substrate | E1-grade melamine faced particleboard | |
|---|---|---|
| Desktop edge trim | 2.0mm thick PVC edge banding, hot-melt applied | |
| Partition frame | 6065-T5 aluminum alloy, powder-coated silver finish | |
| Lower partition panel | Fabric-upholstered hardboard / MFC panel | |
| Upper partition louver section | Translucent polycarbonate slats | |
| Support structure and leveling feet | Powder-coated steel legs with nylon adjustable glides |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Cable management system | Per-position 60mm desk grommets + under-desk aluminum wire troughs | |
|---|---|---|
| Modular assembly design | Pre-installed knock-down connectors for on-site setup | |
| Floor leveling function | Adjustable nylon feet at each frame base | |
| Privacy partition design | 1100mm high panels with opaque lower and translucent upper sections |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Total gross shipping weight | 220 kg | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Open-plan office work areas | Provides divided work zones for 4 staff with shared central footprint | |
|---|---|---|
| Call center and administrative offices | Seated privacy partitions reduce visual distraction between agents |
EU Market Access Requirements* EN Standards
| EN 527-1:2011 | Office worktables safety and strength requirements, applicable to work surfaces | |
|---|---|---|
| EN 1335-1:2020 | Office furniture ergonomic dimensions for seated work, applicable to clearance values | |
| EN 1022:2019 | Domestic and contract furniture seating stability, referenced for desk foot stability | |
| EN 12727:2016 | Office storage furniture strength requirements, applicable if adding under-desk pedestals |
US and Canada office-furniture standards
| ANSI/BIFMA X5.5-2021 | Desk products safety and performance standard, applicable to load ratings | |
|---|---|---|
| ANSI/BIFMA X6.2-2021 | Office panel systems performance standard, applicable to partition construction |
Standards applicable to China-market projects
| GB/T 3324-2024 | General technical requirements for wooden office furniture, applicable to desktops and panels | |
|---|---|---|
| GB 18580-2017 | Formaldehyde emission limit for wood-based panels, required for E1-grade substrates | |
| GB/T 4897.3-2015 | Particleboard specification for furniture use, applicable to desktop core material |
This product must meet the following technical requirements: 1. GB/T 3324-2024: General technical requirements for wooden office furniture, applicable to desktops and panels; 2. GB 18580-2017: Formaldehyde emission limit for wood-based panels, required for E1-grade substrates; 3. GB/T 4897.3-2015: Particleboard specification for furniture use, applicable to desktop core material; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp