2-Person Linear Modular Office Cubicle Workstation with Slatted Privacy Panels (model CUB-2P-LIN-1050H) is listed under L-Shaped Office Desk, with overall dimensions of 3760 × 1880 × 1050 mm and main material of Particle‑board (PB). Load capacity: 113 kg. Certifications: Light,grey,finish,silver,metal,frame,slatted,translucent,upper,panels,solid,lower,modesty,integrated,cable,grommets. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall footprint | 3760 x 1880 x 1050 mm | |
|---|---|---|
| Individual work surface height | 750 mm | |
| Single work surface dimensions | 1820 x 610 mm | |
| Seated knee clearance height under desk | 673 mm | |
| Privacy partition panel total height | 1050 mm | |
| Privacy partition panel thickness | 41 mm | |
| Desktop thickness | 25 mm | |
| Cable grommet diameter per desktop | 60 mm | |
| Desk support leg cross-section | 45 x 45 mm square | |
| Modesty panel height | 420 mm | |
| Slatted upper panel section height | 380 mm | |
| Adjustable leveling foot adjustment range | 15 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Uniform static load per desktop | 113 kg | |
|---|---|---|
| Total unit net weight | 283 kg | |
| Seating capacity per workstation unit | 2 people | |
| Partition frame static load capacity for accessories | 15 kg | |
| Laminate surface abrasion resistance | 2000 cycles | |
| Leveling foot maximum floor gap compensation | 15 mm | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Work surface substrate and finish | 25mm particleboard core with thermally fused light grey laminate top, 2mm PVC edge banding | |
|---|---|---|
| Partition frame structure | Anodized silver aluminum extruded profile frames with steel connecting brackets | |
| Lower privacy/modesty panels | 18mm composite MDF core with matte light grey melamine finish, dark grey accent trim | |
| Upper slatted privacy section | Translucent horizontal rigid slats set in aluminum frame, partial visual/light pass-through | |
| Desk support legs | Powder-coated square steel tube with integrated threaded leveling feet | |
| Cable management grommets | Injection-molded ABS plastic grommet with removable cap, black finish |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Cable routing system | Rear desktop grommets route power/data cables from surface to under-desk wire channels | |
|---|---|---|
| Floor leveling adjustment | Threaded adjustable feet at each support post allow 15mm height adjustment to level stations on uneven floors | |
| Modular panel connection | Bolt-on aluminum bracket connectors allow reconfiguration to add/remove workstations | |
| Seated visual privacy | 1050mm tall partitions block direct line of sight between adjacent seated users |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Open plan office staff seating zones | Provides defined individual workspaces with partial privacy for dense open office layouts | |
|---|---|---|
| Administrative and back-office work areas | Suitable for task-based roles requiring desktop space and cable management for computer equipment |
EU Market Access Requirements* EN Standards
| EN 527-1:2011 | Office work tables safety and strength requirements, applicable to desk performance | |
|---|---|---|
| EN 1335-1:2000 | Office furniture office chairs dimensional safety, coordinated for seated work clearance | |
| EN 1022:2018 | Furniture seating stability, coordinated for compatible chair use at stations |
US and Canada office-furniture standards
| ANSI/BIFMA X5.5-2021 | Desk products performance standard, applicable for desktop load and durability testing | |
|---|---|---|
| ANSI/BIFMA X5.6-2020 | Panel systems performance standard, applicable to partition structural integrity |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to laminate desktop and panel components | |
|---|---|---|
| GB/T 3327-2016 | Technical requirements for office desks, applicable to work surface strength and dimensional stability | |
| GB 18584-2001 | Limit of formaldehyde emission for wooden furniture, applicable for indoor air quality compliance |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to laminate desktop and panel components; 2. GB/T 3327-2016: Technical requirements for office desks, applicable to work surface strength and dimensional stability; 3. GB 18584-2001: Limit of formaldehyde emission for wooden furniture, applicable for indoor air quality compliance; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp