Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	810 × 840 × 840 mm
Armchair seat height	460 mm
Armchair seat interior width	560 mm
Armchair seat interior depth	580 mm
Armchair arm height from floor	610 mm
Armchair backrest height above seat	380 mm
Coffee table tabletop thickness	20 mm
Coffee table pedestal base diameter	400 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Single armchair net weight	27 kg
Single armchair static weight capacity	136 kg
Coffee table distributed static load capacity	45 kg
Armchair swivel mechanism durability	30000 rotation cycles
Seat foam compression rebound rate	45%
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles
Five-star Base Static Load Reference	Acceptance target ≥120 kg; chair reference load 150 kg
Caster Rolling Durability Reference	Acceptance target 30000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Chair upholstery fabric	Two-tone cream/navy soft woven velvet fabric, 0.8mm thickness, 30000 double rub abrasion rating
Seat cushion fill	45kg/m³ high-density polyurethane foam, 120mm thick, with internal sinuous spring support
Backrest fill	35kg/m³ polyurethane foam, 80mm thick, with vertical channel stitching detail
Accent throw pillow	Matching cream velvet cover, 30kg/m³ polyfiber fill, included with each armchair
Chair internal frame	25mm thick kiln-dried hardwood and plywood frame, glued and stapled construction
Chair swivel base	Gold powder-coated steel rotating ring, concealed under upholstered enclosed base
Coffee table tabletop	8mm thick sintered stone faux marble surface, with gold stainless steel edge trim
Coffee table pedestal	Vertically fluted MDF core with matte gold finish paint, gold stainless steel bottom trim ring
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Chair swivel function	360-degree smooth silent rotation, no tilt or recline function for fixed lounge posture
Seating layout	4 single-seat armchairs arranged radially around central table for 4-person conversational seating
Surface storage	Round coffee table provides flat stable surface for drinks, books, small decor items at lounge arm height
Chair ergonomics	Wrap-around curved integrated arm/back design provides enclosed lateral support for relaxed lounging
Assembly requirement	Minimal assembly, only requiring attachment of tabletop to pedestal base on delivery
Fabric maintenance	Spot clean with damp soft cloth, dry dust regularly to preserve upholstery appearance
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential living room	Suitable for open living areas as casual conversational seating for 4 people
Office reception lounge	Suitable for corporate waiting areas or client reception zones for casual visitor seating
Hotel lobby lounge	Suitable for boutique hotel lobby seating nooks for guest rest and conversation
Retail lounge area	Suitable for high-end retail store customer rest zones adjacent to fitting rooms
Residential lounge layout	Recommended placement with 1m clearance between chairs for easy access and swivel movement
Cleaning suitability	Suitable for low-to-medium traffic indoor environments with regular light maintenance
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

Domestic furniture safety recommendation	EN 12520:2015 Strength, durability and safety for domestic seating
Furniture surface finish recommendation	EN 12720:2013 Resistance to cold liquids for furniture surfaces
Upholstered furniture fire recommendation	EN 1021:2014 Ignitability of upholstered furniture, smouldering cigarette

STANDARD S2

North America Purchasing & Inspection Reference * ANSI/BIFMA Standards

US and Canada office-furniture standards

Lounge seating durability recommendation	ANSI/BIFMA X2021Safety and performance for lounge seating
Table stability recommendation	ANSI/BIFMA X2021Safety and performance for occasional tables

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

Upholstered furniture safety recommendation	GB/T 3324General technical requirements for wooden furniture
Furniture fabric performance recommendation	GB/T 21655.1Textiles moisture permeability testing
Furniture hardware recommendation	GB/T 17645Hardware for furniture, rotating mechanisms

Standardized tender description text

This product must meet the following technical requirements:
1. Upholstered furniture safety recommendation: GB/T 3324General technical requirements for wooden furniture;
2. Furniture fabric performance recommendation: GB/T 21655.1Textiles moisture permeability testing;
3. Furniture hardware recommendation: GB/T 17645Hardware for furniture, rotating mechanisms;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · LSET-4CH-RND-TBL-01

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · LSET-4CH-RND-TBL-01

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · LSET-4CH-RND-TBL-01Open Export Tool

Quick Actions

Post an RFQ

Product Description

The 4-Piece Two-Tone Swivel Lounge Chair Set with Round Fluted Pedestal Coffee Table, model LSET-4CH-RND-TBL-01, embodies a modern light luxury aesthetic designed for relaxed, social seating arrangements. Visually, the set features a cohesive two-tone cream and navy soft woven velvet upholstery accented by consistent gold finish details, with four single-seat armchairs arranged radially around the central round table to create an intimate 4-person conversational layout. Vertical channel stitching on chair backrests and fluted detailing on the table pedestal add subtle textural depth, while concealed metal swivel bases maintain a clean, streamlined silhouette across all seating pieces. Each armchair is constructed on a 25mm thick kiln-dried hardwood and plywood frame, secured with glued and stapled joinery, with a 14mm bent plywood support board beneath the seat. Seating surfaces use 45kg/m³ high-density polyurethane foam 120mm thick, paired with internal sinuous spring support for consistent comfort, while backrests feature 35kg/m³ polyurethane foam 80mm thick. Every chair includes a matching cream velvet accent throw pillow filled with 30kg/m³ polyfiber. The 0.8mm thick velvet upholstery carries a 30000 double rub abrasion rating, fitted over a wrap-around curved integrated arm and back structure that provides enclosed lateral support. Gold powder-coated steel swivel rings sit concealed under upholstered enclosed chair bases, delivering 360-degree smooth silent rotation with a fixed 125° lounge angle, no tilt or recline function, and durability rated for 30000 rotation cycles. Each armchair supports a 136kg static weight, with a seat height of 460mm, 560mm interior seat width, 580mm interior seat depth, 610mm arm height from the floor, and 380mm backrest height above the seat. The accompanying round coffee table features an 8mm thick sintered stone faux marble tabletop trimmed with gold stainless steel edge trim, mounted on a vertically fluted MDF pedestal finished in matte gold paint with a gold stainless steel bottom trim ring. The table stands 500mm tall with a 700mm diameter and 20mm tabletop thickness, offering a flat stable surface at lounge arm height to hold drinks, books, and small decor items, with a 45kg distributed static load capacity. This set is well-suited for residential open living areas, corporate office reception and waiting zones, boutique hotel lobby seating nooks, and high-end retail customer rest areas adjacent to fitting rooms. For optimal function, allow 1m clearance between chairs to support easy access and unobstructed swivel movement, and note the set performs best in low-to-medium traffic indoor environments. Maintenance requires regular dry dusting and spot cleaning with a damp soft cloth to preserve upholstery appearance. Procurement considerations include minimal assembly on delivery, requiring only attachment of the tabletop to its pedestal base with an 40 minute assembly time per set. Each set ships in 2 cartons, with a packaged gross weight of 23kg per set, and 135 sets fit in a 20GP container at 85% space utilization. The set ships as an unbranded product, suitable for a range of residential and commercial furnishing applications.

4-Piece Two-Tone Swivel Lounge Chair Set with Round Fluted Pedestal Coffee Table Specifications

Suppliers and stock