Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	838 × 953 × 851 mm
Seat height from floor	510 mm
Seat width between armrests	660 mm
Seat depth front to back	610 mm
Backrest height above seat	460 mm
Armrest height above seat	203 mm
Under-seat ground clearance	152 mm
Individual channel rib width	220 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Recommended static load capacity	150 kg
Net product weight	25 kg
Seat foam density	40 kg/m³
Seat foam thickness	120 mm
Backrest foam thickness	100 mm
Foam rebound rate	55%
Upholstery abrasion resistance	50000 double rubs
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Upholstery fabric	460 GSM short-pile polyester velvet, terracotta orange finish
Seat padding core	High-density polyurethane foam wrapped with 20mm Dacron layer
Backrest padding	Density-matched polyurethane foam with Dacron wrap
Internal structural frame	18mm thick kiln-dried plywood with reinforced corner blocking
Support rib structure	Continuous plywood ribs running front seat to back top, fully upholstered
Armrest structure	Integrated curved plywood arms padded with foam and wrapped in velvet
Fabric seam stitch	8 stitches per inch, matching orange thread, clean finished edges
Floor contact surface	Upholstered rib base with hidden anti-slip felt pads
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Seating function	Fixed non-swivel, non-reclining single-person lounge seating
Back support	105-degree reclined fixed back angle for relaxed lounge posture
Arm support	Curved integrated armrests positioned for natural forearm rest when seated
Under-seat clearance	152mm open gap allows leg extension and floor cleaning access
Stability design	Wide arched integrated base distributes weight evenly without separate legs
Cleaning maintenance	Spot clean upholstery with mild fabric cleaner, avoid harsh chemicals
Placement compatibility	Freestanding design suitable for placement away from walls or in corners
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential living room	Position as accent seating next to sofas or side tables for relaxed reading
Home lounge or reading nook	Place near windows for dedicated single-person quiet seating
Boutique reception area	Use as guest seating in luxury retail or small office waiting zones
Bedroom dressing area	Pair with vanity or small side table for stylish dressing seating
Hospitality lounge spaces	Deploy in hotel lobbies or cafe lounge zones for modern aesthetic seating
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

Seating stability and strength	EN 12520:2015
Upholstered furniture flammability	EN 1021:2014

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

Upholstered furniture safety	GB 20400
Furniture mechanical safety seating	GB 28007

Standardized tender description text

This product must meet the following technical requirements:
1. Upholstered furniture safety: GB 20400;
2. Furniture mechanical safety seating: GB 28007;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · LAC-VEL-OR-03CH

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · LAC-VEL-OR-03CH

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · LAC-VEL-OR-03CHOpen Export Tool

Quick Actions

Post an RFQ

Product Description

The Terracotta Velvet Sculptural Ribbed Lounge Armchair (model LAC-VEL-OR-03CH, unbranded) is a freestanding single-person seating piece defined by its bold monolithic sculptural form. Its continuous, vertically channeled ribbed silhouette runs uninterrupted from the arched integrated base up through the curved armrests and gently sloped backrest, unified by a warm terracotta orange short-pile polyester velvet finish. Individual rib panels form a cohesive, legless profile, with matching orange thread stitched at 8 stitches per inch to deliver clean, finished edges across all upholstered surfaces.
Constructed for long-term use, the chair features an internal frame of 18mm kiln-dried plywood with reinforced corner blocking, supported by 14mm bent plywood internal seat bracing and continuous plywood ribs spanning from the front seat edge to the top of the backrest. Armrests are shaped from curved plywood, padded with foam, and fully wrapped in velvet. The 460 GSM polyester velvet upholstery covers high-density polyurethane foam padding: the seat uses 120mm thick 40 kg/m³ foam wrapped in a 20mm Dacron layer, while the backrest uses density-matched foam with matching Dacron wrap, delivering a 55% foam rebound rate. The upholstery achieves 50000 double rubs of abrasion resistance, and the integrated ribbed base sits on hidden anti-slip felt pads to protect floor surfaces. Fixed at a 105-degree reclined back angle, the chair supports relaxed lounge postures without swivel or recline mechanisms; curved integrated armrests sit at a natural height for forearm rest, while 152mm of under-seat clearance allows full leg extension and easy access for floor cleaning. The chair supports a 150 kg static load, with a 510mm seat height, 660mm seat width between arms, and 610mm seat depth for comfortable positioning. Maintenance requires only spot cleaning with mild fabric cleaner, with harsh chemicals avoided to preserve upholstery integrity.
This chair fits a wide range of public and private spaces: it works as accent seating in residential living rooms beside sofas or side tables, as dedicated quiet seating in home reading nooks near windows, as guest seating in boutique reception areas and small office waiting zones, as stylish dressing seating in bedroom vanity areas, and as curated modern seating in hotel lobbies and cafe lounge zones. For procurement, note that each unit ships in 2 cartons with 40 minutes of required assembly time, and plan placement to leverage its freestanding design, which works equally well positioned away from walls as a focal point or tucked into corners. It pairs well with a 2.4m executive desk for workspace lounge setups.

Terracotta Velvet Sculptural Ribbed Lounge Armchair Specifications

Suppliers and stock