Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	830 × 760 × 830 mm
Overall assembled dimensions	830 x 760 x 830 mm
Seat height from floor	450 mm
Seat width (inner arm to arm)	680 mm
Seat depth (front to back)	550 mm
Backrest total height above seat	380 mm
Leg height from floor to seat frame	350 mm
Front leg spread width (outer edge)	780 mm
Rear leg spread depth (outer edge)	680 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Recommended static weight capacity	150 kg
Cushion foam density	30 kg/m³
Cushion foam rebound rate	45%
Seat cushion thickness	120 mm
Backrest padding thickness	80 mm
Net product weight	22 kg
Floor glide static load rating	50 kg per glide
Seam stitch pitch	8 stitches per 30mm
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Inner seat/back upholstery	Smooth matte faux leather, 1.2mm thickness
Outer back panel	Dark brown diamond-pattern woven polyester fabric
Cushion core	High-density polyurethane foam with supportive inner layer
Leg structure	1.5mm thick black powder-coated tapered steel tube
Floor glides	Injection-molded non-marking nylon, screw-in adjustable
Seat cushion edge	Matching faux leather piped trim
Internal seat frame	12mm thick multilayer plywood, kiln-dried
Outer back substrate	Molded hardboard panel for woven fabric application
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Seating configuration	Fixed single-seat non-reclining, non-swivel design
Armrest design	Integrated curved barrel armrests formed by continuous back wrap
Floor protection	Screw-in nylon glides prevent hard floor scratching
Assembly requirement	Knocked-down leg attachment, 4 bolts per leg for installation
Weight distribution	Four outward-angled legs provide tip resistance for up to 150kg load
Posture support	Curved wrap back provides mid-back and lateral arm support for relaxed seating
Cleaning access	Removable seat cushion with piped edge for surface cleaning
Application flexibility	Freestanding design with no wall-mount or floor fixation required
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential living room	Placed as accent seating next to sofas or coffee tables for casual guest use
Office reception lounge	Used in waiting areas for short-term visitor seating in modern workspaces
Hotel guest room seating	Positioned near windows or vanities as compact in-room lounge seating
Cafe and lounge seating	Arranged in small clusters for casual patron seating in hospitality spaces
Bedroom reading nook	Placed in corners as dedicated relaxed reading seating with adjacent side table
Showroom and display areas	Used as demo seating in furniture showrooms to showcase modern two-tone design
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12520:2015	Furniture strength, durability and safety for domestic seating, applicable to verification
EN 1022:2018	Seating stability test methods, applicable to tip resistance validation

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to frame quality checks
GB 18584-2001	Limit of harmful substances in wooden furniture, applicable to formaldehyde checks
GB/T 19833-2005	Furniture strength, durability and stability for seating, applicable to performance testing

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to frame quality checks;
2. GB 18584-2001: Limit of harmful substances in wooden furniture, applicable to formaldehyde checks;
3. GB/T 19833-2005: Furniture strength, durability and stability for seating, applicable to performance testing;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · LAC-TB45-BGWB-01

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · LAC-TB45-BGWB-01

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · LAC-TB45-BGWB-01Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Two-Tone Curved Barrel Upholstered Lounge Armchair, model LAC-TB45-BGWB-01, features a distinct two-tone visual profile defined by its continuous curved barrel silhouette, where integrated armrests wrap seamlessly from the backrest to form an enclosed, inviting single-seat layout. The design balances soft, rounded seating lines with structured, angled legs for a cohesive modern aesthetic. Its construction pairs durable, tactile materials for long-term indoor use: the inner seat and back are upholstered in smooth matte 1.2mm thick beige faux leather with matching piped trim on the seat cushion edge, while the outer back panel uses dark brown diamond-pattern woven polyester fabric mounted on a molded hardboard substrate. The internal frame uses kiln-dried multilayer plywood and bent support board, paired with tapered 1.5mm thick black powder-coated steel legs fitted with screw-in adjustable, non-marking injection-molded nylon floor glides. Seating support comes from high-density polyurethane foam cushioning, with a thick seat core and contoured back padding for relaxed posture. This fixed, non-reclining, non-swivel chair delivers targeted practical function: the curved wrap structure provides mid-back and lateral arm support, four outward-angled legs deliver stable tip resistance for its rated static weight capacity, and the removable seat cushion allows straightforward surface cleaning. The non-marking glides prevent scratches to hard flooring, and assembly requires only attachment of legs with included hardware. The chair fits a wide range of residential and commercial settings. In homes, it works as accent seating next to living room sofas or coffee tables for casual guest use, or as a dedicated reading nook seat in bedroom corners paired with a small side table. In commercial spaces, it suits modern office reception waiting areas for short-term visitor seating, compact hotel guest room placement near windows or vanities, small cluster arrangements in cafes and lounges for patron use, and display placement in furniture showrooms to highlight contemporary design. Procurement teams should note the chair ships in two cartons per set, with straightforward leg assembly required, and plan for appropriate shipping volume and weight per unit when coordinating bulk orders. The fixed, non-adjustable structure and easy-to-clean upholstery make it well suited for high-traffic casual seating zones where consistent modern styling and reliable daily use are priorities.

Two-Tone Curved Barrel Upholstered Lounge Armchair Specifications

Suppliers and stock