Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	720 × 670 × 740 mm
Seat width	580 mm
Seat depth	540 mm
Seat height	460 mm
Backrest height	280 mm
Armrest height	630 mm
Seat cushion thickness	120 mm
Leg height	340 mm
Metal foot cap height	30 mm
Seat-back cutout gap height	90 mm
Backrest vertical channel width	180 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Net weight	14 kg
Static weight capacity	136 kg
Seat foam density	35 kg/m³
Foam rebound rate	45%
Velvet upholstery abrasion resistance	30000 Martindale cycles
Floor protection load per foot	34 kg
Seam stitch pitch	8 stitches per 30 mm
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Upholstery fabric	Polyester velvet, dark olive green, matte soft pile
Inner seat frame	Kiln-dried solid pine and 12mm plywood
Seat cushion fill	High-density polyurethane foam wrapped with 20mm Dacron batting
Backrest fill	25kg/m³ polyurethane foam over curved plywood form
Leg construction	Tapered solid hardwood legs with matte dark finish
Leg foot caps	Polished brass-plated steel ferrules, 30mm height
Central stabilizer foot	Small metal height-adjustable glide under seat front center
Foot pads	Non-marking nylon glides at base of each metal cap
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Frame structure	Fixed non-reclining rigid frame, no tilt or swivel mechanism
Back support	Curved wraparound barrel back with vertical channel stitching for shape retention
Integrated armrests	Continuous curved arms forming part of the back frame for wrap-around support
Floor protection	Non-marking glides on all feet to prevent scuffing on hard floor surfaces
Assembly requirement	Knock-down leg attachment with included Allen key and hardware
Stability design	Splayed leg angle plus central front stabilizer foot to prevent forward tipping
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Living room lounge area	Placed as standalone occasional seating next to sofa or coffee table for guest use
Bedroom corner reading nook	Positioned near window or bedside for relaxed single-person seating
Home office reception zone	Used as guest seating opposite a desk for casual meetings
Entryway foyer	Placed in entry vestibule for temporary seating when putting on footwear
Boutique waiting area	Used in small retail or salon waiting spaces for lightweight customer seating
Upholstery care recommendation	Spot clean with damp cloth, avoid direct sunlight to prevent velvet fading
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 1022:2018	Domestic furniture seating stability test standard, applicable to tip resistance
EN 12520:2015	Domestic furniture seating strength and durability requirements, applicable to frame performance

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to structural frame safety
GB 18584-2001	Limit of harmful substances in wooden furniture, applicable to formaldehyde emission limits
GB/T 19817-2005	Upholstered furniture fabric performance requirements, applicable to velvet durability

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to structural frame safety;
2. GB 18584-2001: Limit of harmful substances in wooden furniture, applicable to formaldehyde emission limits;
3. GB/T 19817-2005: Upholstered furniture fabric performance requirements, applicable to velvet durability;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · LAC-OLV-720CH

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · LAC-OLV-720CH

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · LAC-OLV-720CHOpen Export Tool

Quick Actions

Post an RFQ

Product Description

The Dark Olive Green Velvet Curved Open Back Accent Armchair (model LAC-OLV-720CH) is an unbranded upholstered accent seat defined by its smooth, wraparound barrel silhouette. Its curved open back features a horizontal seat-back cutout and vertical channel stitching that reinforces structural shape, paired with continuous integrated arms that flow seamlessly from the back frame to create an enveloping seating profile. Tapered solid hardwood legs in a matte dark finish terminate in polished brass-plated steel foot caps, elevating the piece with subtle metallic contrast. The chair is built on a kiln-dried solid pine and 12mm plywood inner frame, with a 14mm bent plywood internal seat support board for consistent weight distribution. Seat cushions use high-density polyurethane foam wrapped in Dacron batting, while the curved backrest is padded with polyurethane foam over a formed plywood base. The upholstery is dark olive green polyester velvet with a matte soft pile, stitched at a consistent density for durable seams. Each leg sits on non-marking nylon glides, and a central height-adjustable metal glide at the front center of the seat adds extra stability, paired with a splayed leg angle to prevent forward tipping. The frame is fixed and non-reclining, with no tilt or swivel mechanisms, and requires leg attachment on delivery via the included Allen key and hardware, with a typical assembly time of 40 minutes per unit. This armchair fits a wide range of residential and light commercial settings. In homes, it works as standalone occasional seating next to living room sofas or coffee tables, as a dedicated seat for bedroom corner reading nooks, as casual guest seating opposite home office desks, or as temporary entryway seating for putting on footwear. In commercial spaces, it suits small boutique or salon waiting areas for lightweight customer use. Velvet upholstery should be spot cleaned with a damp cloth and kept out of direct sunlight to prevent fading. For procurement planning, note that each unit ships across two cartons, supports a static weight capacity of 136 kg, and offers a velvet abrasion resistance rating suitable for regular low-to-moderate traffic use.

Dark Olive Green Velvet Curved Open Back Accent Armchair Specifications

Suppliers and stock