Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	2400 × 2400 × 780 mm
Lounge chair seat height	420 mm
Lounge chair seat width	700 mm
Lounge chair seat depth	650 mm
Lounge chair backrest height above seat	360 mm
Coffee table fluted pedestal base diameter	350 mm
Circular arrangement overall footprint	2400 x 2400 mm
Table top thickness	20 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Total set net weight	140 kg
Per-chair static load capacity	181 kg
Swivel mechanism cycle rating	30000 rotations
Upholstery abrasion resistance (Martindale)	50000 cycles
Seat cushion foam density	45 kg/m³
Seat cushion foam thickness	100 mm
Backrest foam thickness	80 mm
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Chair inner frame	18mm thick plywood + solid hardwood structural framing
Chair outer upholstery	Warm orange performance fabric with PU coating, wipeable surface
Chair inner seat/back upholstery	Off-white soft performance weave fabric, stain-resistant treatment
Chair swivel base	Powder-coated steel chassis with brushed gold metal trim ring
Chair base floor protection	5mm thick non-slip felt pads applied to base bottom
Coffee table tabletop	20mm thick polished faux marble engineered stone, sealed stain-resistant finish
Coffee table pedestal base	1.2mm thick fluted ribbed steel tube, light gold powder-coated finish
Table base trim	Brushed gold metal accent ring at pedestal floor contact point
Stitching construction	10mm seam pitch, reinforced nylon thread on upholstery seams
Cushion core material	High-resilience polyurethane foam, 40% rebound rate
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Chair swivel function	360-degree smooth rotation with automatic return to neutral position
Seating ergonomics	Curved wrap-around back and integrated side bolsters support relaxed upright posture
Table function	Round top provides equal access for all 4 seated guests, no sharp edges for public safety
Floor protection	Felt base pads prevent scratching on polished stone, tile, or hardwood flooring
Cleaning suitability	Smooth wipeable upholstery and sealed stone top support daily disinfecting in commercial spaces
Assembly requirement	Chairs ship fully assembled, table requires 3-bolt pedestal attachment with included hardware
Mobility	Low-profile bases allow easy repositioning by maintenance staff without built-in casters
Color matching	Two-tone orange/off-white upholstery coordinates with gold trim and faux marble table for modern office aesthetics
Chair swivel base diameter	600 mm
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Office reception areas	Provides 4-guest seating around central table for visitor waiting and casual check-in conversation
Corporate lounge break areas	Offers relaxed informal seating for staff short breaks or small team casual discussions
Lobby waiting zones	Decorative sculptural design complements modern high-end hotel or serviced office lobbies
Healthcare clinic waiting spaces	Wipeable surfaces and easy maintenance support regular sanitization for public waiting areas
Small meeting breakout spaces	Supports informal 4-person collaborative discussions away from formal conference rooms
High-end retail customer areas	Provides comfortable waiting seating for premium retail consultation or VIP customer areas
Design studio reception spaces	Modern organic design aesthetic matches creative workplace interior design schemes
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 16139:2013	Applicable to strength, durability, and safety requirements for non-domestic seating
EN 12521:2015	Applicable to safety, strength, and durability requirements for domestic and contract tables
EN 1022:2018	Applicable to stability testing for seating, required for swivel chair design

STANDARD S2

North America Purchasing & Inspection Reference * ANSI/BIFMA Standards

US and Canada office-furniture standards

ANSI/BIFMA X5.1-2017	Recommended safety and performance standard for general-purpose office lounge chairs
ANSI/BIFMA X5.5-2021	Recommended performance standard for occasional-use office tables, including coffee tables
ANSI/BIFMA X7.1-2020	Recommended standard for formaldehyde emission limits in composite wood components

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	Applicable to general technical requirements for wooden furniture, including internal chair framing
GB/T 19001-2016	Recommended quality management system standard for commercial furniture manufacturers
GB 20400-2006	Applicable to leather/fabric upholstery limits of harmful substances for indoor furniture
GB/T 4893.4-2013	Applicable to surface wear resistance testing for tabletop finishes

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: Applicable to general technical requirements for wooden furniture, including internal chair framing;
2. GB/T 19001-2016: Recommended quality management system standard for commercial furniture manufacturers;
3. GB 20400-2006: Applicable to leather/fabric upholstery limits of harmful substances for indoor furniture;
4. GB/T 4893.4-2013: Applicable to surface wear resistance testing for tabletop finishes;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · RCP-LNG-4CH-CT01

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · RCP-LNG-4CH-CT01

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · RCP-LNG-4CH-CT01Open Export Tool

Quick Actions

Post an RFQ

Product Description

The 4-Seat Two-Tone Pebble Swivel Lounge Reception Set with Round Fluted Pedestal Coffee Table delivers a sculptural, modern seating solution centered on balanced visual contrast and approachable form. Arranged in a circular layout, the set features four pebble-contoured lounge chairs positioned evenly around a central round coffee table, creating an open, inviting configuration that encourages casual conversation without visual clutter. The two-tone upholstery pairs warm orange fabric on outer chair surfaces with soft off-white performance weave on seat and back interiors, complemented by brushed gold metal trim on both chair bases and the table pedestal for a cohesive, polished aesthetic.
Each lounge chair is built with a structural frame of 18mm plywood and solid hardwood, upholstered with performance fabrics treated for practical daily use: the outer fabric carries a PU coating for easy wipe-downs, while the inner seating fabric has a stain-resistant finish. Seating cushions use 45 kg/m³ density foam, with 100mm thick seat cushioning and 80mm thick backrest cushioning, shaped into a curved wrap-around profile with integrated side bolsters to support relaxed upright posture. Each chair sits on a powder-coated steel swivel base fitted with non-slip 5mm felt pads to protect flooring, supporting smooth 360-degree rotation with an automatic return to neutral position. The accompanying coffee table features a 20mm thick polished faux marble engineered stone top with a sealed, stain-resistant finish and rounded, edge-free profile for public safety, supported by a 1.2mm thick fluted ribbed steel pedestal finished in light gold powder coat, accented with a brushed gold trim ring at the floor contact point.
This set supports a wide range of commercial and select residential applications: it works seamlessly in office reception areas for visitor waiting and casual check-in conversations, corporate lounge break areas for staff respite or small team discussions, high-end hotel and serviced office lobbies, healthcare clinic waiting spaces where regular sanitization is required, small meeting breakout zones for informal collaboration, and premium retail customer areas for VIP consultation seating. Its wipeable upholstery and sealed stone tabletop accommodate daily disinfecting routines, and chairs ship fully assembled to reduce on-site setup time; the table requires only simple 3-bolt attachment to its pedestal with included hardware, for a straightforward assembly process. Low-profile chair bases allow easy repositioning by maintenance staff without integrated casters, while the felt floor pads prevent scratching on polished stone, tile, and hardwood surfaces. For procurement planning, note that each set ships in two cartons, with durable upholstery and robust swivel mechanisms rated for heavy public use, and a circular overall footprint that allows flexible placement in open plan spaces without disrupting adjacent traffic flow.

4-Seat Two-Tone Pebble Swivel Lounge Reception Set with Round Fluted Pedestal Coffee Table Specifications

Suppliers and stock