Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	790 × 790 × 890 mm
Chair seat height	450 mm
Chair seat width	560 mm
Chair seat depth	540 mm
Chair back height	440 mm
Chair leg height	410 mm
Coffee table top thickness	30 mm
Coffee table base rod diameter	12 mm
Set arrangement footprint	2200 x 2200 mm
Under-table knee clearance	420 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Chair static load capacity	150 kg
Chair net weight	14 kg
Seat foam density	35 kg/m³
Seat foam rebound rate	90%
Upholstery abrasion resistance	20000 Martindale cycles
Seam stitch pitch	8 mm
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles
Five-star Base Static Load Reference	Acceptance target ≥120 kg; chair reference load 150 kg

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Chair upholstery	1.2mm thick PU faux leather with stain and scratch resistant finish
Chair seat padding	35kg/m³ high-density polyurethane foam, 80mm thick seat cushion
Chair back padding	25kg/m³ polyurethane foam, 50mm thick contoured back support
Chair internal frame	1.2mm thick cold-rolled steel tube inner support structure
Chair legs	1.0mm thick powder-coated matte black tapered steel tube, 20mm diameter
Coffee table top	30mm thick black matte MDF panel with sealed edge, smooth non-porous surface
Coffee table base	12mm diameter powder-coated black solid steel rod geometric cross-braced frame
Metal surface treatment	Electrostatic powder coating with rust-preventive undercoat on all steel components
Chair foot pads	8mm thick non-slip polyethylene floor protection glides attached to leg ends
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Seating configuration	4 single-seat bucket armchairs arranged around central table for 4-person conversation
Chair support	Fixed rigid steel legs with no swivel, tilt, gas lift or height adjustment
Assembly requirement	Knock-down assembly with legs attached to chair frames and table base fastened to top via included hardware
Floor protection	Non-slip glides on all leg bases prevent floor scratching and reduce movement noise
Color options	Available in orange, dark grey, light sage green, white upholstery with unified black metal finish
Seating ergonomics	Angled wraparound back and integrated armrests support semi-reclined relaxed lounge posture
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Office reception areas	Provides casual guest waiting seating with central table for reading materials and drinks
Breakout and collaboration zones	Supports impromptu small team conversations in open office spaces
Residential living rooms	Functions as compact accent seating set for small apartments or lounge corners
Cafe and lounge waiting areas	Suitable for light-traffic commercial hospitality spaces with easy-to-clean PU upholstery
Showroom and sales center consultation areas	Creates approachable low-pressure seating for client meetings
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 1022:2018	Domestic and contract seating stability test standard for fixed-leg accent chairs
EN 12520:2015	Furniture strength, durability and safety requirements for non-domestic seating
EN 15372:2016	Durability and safety requirements for non-domestic tables, applicable to coffee table

STANDARD S2

North America Purchasing & Inspection Reference * ANSI/BIFMA Standards

US and Canada office-furniture standards

ANSI/BIFMA X5.4-2022	Performance standard for lounge seating static and impact load testing
ANSI/BIFMA X5.5-2021	Performance standard for occasional tables, load and stability requirements

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for metal furniture, applicable to frame strength and finish durability
GB 18584-2001	Formaldehyde emission limit for interior decoration materials, <0.05mg/m³ acceptance threshold
GB/T 16799-2008	Technical specification for polyurethane leather used in furniture upholstery
GB 17927.1-2015	Upholstered furniture flammability resistance standard for public space use

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for metal furniture, applicable to frame strength and finish durability;
2. GB 18584-2001: Formaldehyde emission limit for interior decoration materials, <0.05mg/m³ acceptance threshold;
3. GB/T 16799-2008: Technical specification for polyurethane leather used in furniture upholstery;
4. GB 17927.1-2015: Upholstered furniture flammability resistance standard for public space use;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · LGS-BKT4-CT70R

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · LGS-BKT4-CT70R

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · LGS-BKT4-CT70ROpen Export Tool

Quick Actions

Post an RFQ

Product Description

This unbranded lounge seating set, model LGS-BKT4-CT70R, includes four upholstered bucket accent armchairs and one round coffee table, designed with a clean, modern minimalist aesthetic. The four single-seat chairs are arranged around the central low table to form a cohesive four-person conversation layout, with a unified matte black finish on all metal components that pairs with a choice of orange, dark grey, light sage green, or white PU faux leather upholstery for flexible visual coordination across different spaces.
Each chair features contoured, wraparound bucket styling with integrated armrests, angled to support a relaxed semi-reclined lounge posture. The upholstery is finished to resist stains and scratches, with high-density foam padding: 80mm thick seat cushions and 50mm thick shaped back support deliver balanced comfort. Internal chair frames are built from cold-rolled steel tube, supported by fixed tapered powder-coated steel legs fitted with non-slip polyethylene glides that prevent floor scratches and reduce movement noise. Chairs have a static load capacity of 150kg, with no swivel, tilt, or height adjustment functions for stable, consistent seating. The accompanying round coffee table has a thick black matte MDF top with sealed, smooth non-porous edges and surface, supported by a geometric cross-braced powder-coated solid steel rod base; all steel components include a rust-preventive undercoat beneath the electrostatic powder coating for long-term durability.
The set uses knock-down construction, shipped in two cartons per set, with all required hardware included for assembly that takes 40 minutes per set. It suits a range of both commercial and residential spaces: casual office reception areas for guest waiting, open-plan office breakout and collaboration zones for impromptu small team discussions, compact residential living rooms or apartment lounge corners as accent seating, light-traffic cafe and lounge waiting areas with easy-to-clean surfaces, and showroom or sales center consultation areas for approachable client meetings. When procuring, note the fixed seating configuration, available upholstery color options, required assembly time, and packaging specifications to align with space planning and installation workflows; the set pairs well with a 2.4m executive desk in office settings.

4-Seat Upholstered Bucket Lounge Accent Chair Set with Round Geometric Metal Base Coffee Table Specifications

Suppliers and stock