Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	737 × 864 × 889 mm
Seat height from floor	483 mm
Seat width between side supports	660 mm
Seat depth from front edge to backrest	559 mm
Backrest height from seat surface	470 mm
Under-seat foot clearance height	203 mm
Integrated side support thickness	127 mm
Backrest thickness at widest point	102 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Recommended static weight capacity	136 kg
Net product weight	25 kg
Velvet upholstery abrasion resistance	30000 double rubs
Seat foam density	32 kg/m³
Seat foam rebound rate	45%
Back foam thickness	76 mm
Seat cushion foam thickness	102 mm
Frame joint static load test threshold	1361 kg
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Outer upholstery	Matte olive green polyester velvet, 0.8mm fabric thickness
Seat core padding	High-density polyurethane foam wrapped with 10mm dacron fiber
Internal frame	Kiln-dried solid hardwood and 18mm plywood, glued/stapled/blocked corners
Integrated base support	Upholstery-wrapped hardwood frame forming waterfall front, no exposed legs
Backrest support webbing	80mm wide elastic webbing spaced 75mm apart
Seam construction	Concealed stitched seams with 8 stitches per 30mm pitch
Floor contact pads	5mm thick non-scratch felt pads at each base contact point
Edge finishing	Fully rounded, pipeless soft upholstered edges on all surfaces
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Seating position	Stationary upright lounge posture, fixed 100-degree backrest angle
Space-saving design	Armless compact footprint fits small nooks without protruding arms
Assembly requirement	Minimal tool-free assembly, attach non-scratch floor pads only
Cleaning method	Spot clean with water-based upholstery cleaner, do not saturate fabric
Ergonomic support	Waterfall seat edge reduces pressure on back of knees during seating
Floor compatibility	Felt-pad base safe for hardwood, tile, vinyl and low-pile carpet
Weight distribution	Wide 4-point integrated base contact prevents tipping on level floors
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Shipping carton dimensions	940 x 813 x 508 mm
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential living spaces	Use as accent seating in living rooms, reading nooks or bedroom vanity areas
Commercial lounge areas	Suitable for boutique lobbies, waiting areas and coworking lounge spaces
Entryway or foyer seating	Low-profile design fits narrow entryways for temporary seating
Studio apartment furnishing	Space-saving armless form works as additional seating in small dwellings
Mixed seating groups	Pairs with sofas and coffee tables for layered lounge layouts
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12520:2015	Furniture – Strength, durability and safety for domestic seating
EN 1021-1:2014	Furniture – Assessment of ignitability of upholstered furniture (smouldering cigarette source)

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to internal frame and structural performance
GB 18584-2001	Indoor decorating and refurbishing materials – limit of harmful substances for wooden furniture

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to internal frame and structural performance;
2. GB 18584-2001: Indoor decorating and refurbishing materials – limit of harmful substances for wooden furniture;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · SLP-OLV-740

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · SLP-OLV-740

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · SLP-OLV-740Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Olive Green Velvet Upholstered Armless Waterfall Slipper Accent Chair, model SLP-OLV-740, carries an unbranded positioning as a streamlined armless upholstered accent slipper chair built for flexible seating across residential and commercial settings.
Its visual profile features a low-profile, seamless stationary form with fully rounded, pipeless soft upholstered edges across all surfaces. The integrated, upholstery-wrapped hardwood base creates a smooth waterfall front with no exposed legs, finished in a rich matte olive green polyester velvet that lends a soft, luxe textural presence without overt ornamentation. The compact armless layout eliminates protruding side elements to create a clean, unobtrusive silhouette that integrates smoothly with surrounding decor.
Construction centers on a durable internal frame made of kiln-dried solid hardwood and plywood, with reinforced glued, stapled, and blocked corners for structural stability. Wide elastic webbing supports the backrest, while a bent plywood support board sits beneath the seat core. The seat uses high-density polyurethane foam wrapped in dacron fiber, topped with plush padding, with matching foam in the backrest to deliver balanced comfort. The matte velvet upholstery is secured with concealed stitched seams, and non-scratch felt pads line every base contact point to protect finished flooring surfaces.
Functionally, the chair supports a stationary upright lounge posture with a fixed backrest angle, with the contoured waterfall seat edge designed to reduce pressure on the back of the knees during extended seating. Its armless, compact footprint fits tight spaces without protruding elements, and assembly requires no tools, as users only need to attach the included floor protection pads before use. The chair can be spot cleaned with water-based upholstery cleaner, provided fabric is not saturated, and the wide four-point integrated base delivers stable weight distribution to resist tipping on level surfaces, with compatibility for hardwood, tile, vinyl, and low-pile carpet flooring.
This chair fits a broad range of spaces: in residential settings, it works as accent seating in living rooms, dedicated reading nooks, bedroom vanity areas, narrow entry foyers, or small studio apartments where space is at a premium. Commercially, it is suited for boutique lobbies, customer waiting areas, and coworking lounge spaces, and it pairs seamlessly with sofas and coffee tables to build layered mixed seating group layouts.
For procurement planning, note that each unit ships across two cartons, with no specialized tools required for the straightforward assembly process. Buyers should account for the recommended static weight capacity when evaluating use cases, and follow the specified spot cleaning guidance to preserve the velvet upholstery appearance over time. The chair’s armless form is best suited for spaces where compact, flexible seating is prioritized over armrest support, and its soft olive finish coordinates well with warm neutral, earthy, and muted contemporary decor palettes.

Olive Green Velvet Upholstered Armless Waterfall Slipper Accent Chair Specifications

Suppliers and stock