| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Finished Seat Cushion Thickness | 90 mm | |
|---|---|---|
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Single chair static load capacity | 150 kg | |
|---|---|---|
| Single chair net weight | 16 kg | |
| Seat cushion foam density | 35 kg/m³ | |
| Back cushion fill weight | 0.8 kg | |
| Recommended maximum seating duration | 4 hours | |
| Chair leg floor load spread | 20 mm diameter foot cap | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles | |
| Five-star Base Static Load Reference | Acceptance target ≥120 kg; chair reference load 150 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
| Chair seat and back upholstery | 280g/m² linen-look polyester fabric | |
|---|---|---|
| Chair seat cushion core | 80mm thick high-resilience polyurethane foam | |
| Chair backrest inner frame | 15mm thick multilayer plywood | |
| Teal chair frame and legs | 1.2mm thick matte gold plated carbon steel | |
| Blush chair frame and legs | 1.2mm thick matte black powder coated carbon steel | |
| Coffee table tabletop | 20mm polished engineered sintered stone | |
| Coffee table middle column | 2mm thick matte black powder coated steel | |
| Coffee table lower base | 20mm thick white marble-look engineered stone | |
| Coffee table decorative trim | 0.8mm polished gold plated steel ring | |
| Floor contact pads | 5mm thick non-slip rubber | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame |
Adjustment / rotation / tilt / mobility / storage features
| Armless chair design | Curved enveloping backrest wraps 120 degrees around seat | |
|---|---|---|
| Matching throw cushion | Removable square cushion placed against backrest | |
| Four-leg splayed base | 15-degree outward angled legs for 380mm support footprint | |
| Coffee table weighted base | Wide conical lower base lowers center of gravity | |
| Smooth rounded table edge | 2mm radius polished edge on tabletop | |
| Non-marking floor glides | Fixed rubber caps on all leg and base contact points | |
| Mixed leg finish configuration | Two chairs with gold legs, two chairs with black legs | |
| Stationary non-swivel seating | Fixed connection between seat frame and legs | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Office reception areas | 4-seat configuration for small guest waiting spaces adjacent to entry points | |
|---|---|---|
| Cafe and tea lounge seating | Suitable for casual beverage service with central table for drink placement | |
| Breakout meeting zones | Small informal discussion areas in open plan workplaces | |
| Boutique retail waiting areas | Upscale two-tone design fits beauty salons, fashion boutiques and showroom spaces | |
| Residential living room accent seating | Small conversation set for apartment living rooms or studio spaces | |
| Hotel corridor and lift lobby seating | Stable non-tip design suitable for high foot traffic public hospitality areas | |
| Co-working space casual zones | Flexible seating for informal collaboration and individual short work breaks | |
| Recommended Matching Desk Size | 2.4 m executive desk |
EU Market Access Requirements* EN Standards
| Seating strength and stability recommendation | EN 16139:2013 | |
|---|---|---|
| Furniture surface durability recommendation | EN 12720:2009+A1:2013 |
US and Canada office-furniture standards
| Lounge seating structural recommendation | ANSI/BIFMA X2021 | |
|---|---|---|
| Occasional table stability recommendation | ANSI/BIFMA X2021 |
Standards applicable to China-market projects
| Upholstered furniture safety recommendation | GB/T 27030 | |
|---|---|---|
| Fabric flame retardancy recommendation | GB 20286 | |
| Formaldehyde emission recommendation | GB 18584 |
This product must meet the following technical requirements: 1. Upholstered furniture safety recommendation: GB/T 27030; 2. Fabric flame retardancy recommendation: GB 20286; 3. Formaldehyde emission recommendation: GB 18584; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
