Product supplierSculptural Armless Red Fabric Swivel Lounge Chair With Central Back Cutout, Red woven polyester fabric
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 820 × 915 × 940 mm | |
|---|---|---|
| Seat height | 440 mm | |
| Seat depth | 540 mm | |
| Seat width | 520 mm | |
| Backrest height | 500 mm | |
| Central back cutout dimensions | 380 x 180 mm | |
| Base height | 40 mm | |
| Tapered body lower width at base connection | 220 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Recommended static load capacity | 159 kg | |
|---|---|---|
| Product net weight | 42 kg | |
| Seat foam density | 40 kg/m³ | |
| Seat foam rebound rate | 55% | |
| Backrest foam thickness | 60 mm | |
| Seat cushion foam thickness | 80 mm | |
| Seam stitch pitch | 30 mm | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Outer upholstery | Red woven polyester fabric | |
|---|---|---|
| Seat cushion fill | High-density polyurethane foam wrapped with 20g polyester fiber | |
| Backrest fill | High-density polyurethane foam over curved inner frame | |
| Inner structural frame | 1.5 mm thick powder-coated formed steel tubing | |
| Swivel mechanism | 10 mm thick steel ball-bearing swivel plate | |
| Round base plate | 12 mm thick polished #304 stainless steel disc | |
| Upholstery edge trim | Matching fabric welting along shell edges | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm | |
| Tilt Mechanism Plate Thickness | 2.5 mm cold-rolled steel | |
| Five-star Base Material Thickness | Metal base wall 3.5 mm; diameter 700 mm |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Rotation function | 360-degree silent ball-bearing swivel rotation without locking position | |
|---|---|---|
| Ergonomic support | Curved integrated backrest wraps upper back for relaxed lounge posture | |
| Open back feature | Central oval cutout provides airflow and visual lightness to the sculptural form | |
| Stability design | Wide 700 mm diameter metal base prevents tipping during normal swivel use | |
| Upholstery performance | Woven fabric surface provides 50,000 double-rub abrasion resistance for commercial use | |
| Swivel base diameter | 700 mm | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential living room use | Place as standalone accent seating in modern living rooms for contemporary aesthetic appeal | |
|---|---|---|
| Commercial lobby use | Deploy in hotel lobbies, corporate reception areas for designer-focused guest seating | |
| Open office breakout space | Use in informal collaboration zones for relaxed short-term seating | |
| Retail showroom use | Position in fashion or furniture showrooms as sculptural visual anchor piece | |
| Recommended floor surface | Suitable for hard concrete, tile, wood or low-pile carpet floors with polished base | |
| Color compatibility | Red fabric finish pairs with neutral warm-toned interior palettes for visual contrast | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| Seating strength recommendation | EN 12520:2015 Furniture, strength, durability and safety requirements for domestic seating | |
|---|---|---|
| Contract seating recommendation | EN 16139:2013 Furniture, strength, durability and safety for non-domestic seating | |
| Upholstery flammability recommendation | EN 1021:2014 Ignition resistance of upholstered furniture, smouldering cigarette test |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| Lounge seating durability recommendation | ANSI/BIFMA X2020Standard for lounge seating, durability and stability testing |
|---|
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| Structural safety recommendation | GB/T 3324General technical requirements for wooden furniture, applicable for structural stability checks | |
|---|---|---|
| Upholstered furniture safety recommendation | GB 28007Safety requirements for upholstered furniture for children and general use, applicable for fire and structural checks | |
| Metal furniture finish recommendation | GB/T 3325General technical requirements for metal furniture, applicable for base corrosion resistance checks |
Standardized tender description text
This product must meet the following technical requirements: 1. Structural safety recommendation: GB/T 3324General technical requirements for wooden furniture, applicable for structural stability checks; 2. Upholstered furniture safety recommendation: GB 28007Safety requirements for upholstered furniture for children and general use, applicable for fire and structural checks; 3. Metal furniture finish recommendation: GB/T 3325General technical requirements for metal furniture, applicable for base corrosion resistance checks; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool