| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Set overall footprint | 2400 x 2400 x 800 mm | |
|---|---|---|
| Round coffee table dimensions | 800 mm diameter x 480 mm height | |
| Single lounge chair overall dimensions | 740 mm width x 750 mm depth x 800 mm height | |
| Chair seat height | 450 mm | |
| Chair seat dimensions | 550 mm width x 500 mm depth | |
| Chair back height above seat | 350 mm | |
| Chair arm height above seat | 200 mm | |
| Table base diameter at floor | 400 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Per-chair static load capacity | 150 kg | |
|---|---|---|
| Foam density (seat and back) | 45 kg/m³ | |
| Foam rebound rate | 60% | |
| Seat foam thickness | 80 mm | |
| Upholstery abrasion resistance | 50000 double rubs | |
| Set total net weight | 110 kg | |
| Seating capacity | 4 people | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Chair upholstery | Wear-resistant polyester fabric, two-tone grey and red finish | |
|---|---|---|
| Chair internal frame | 20 mm tubular powder-coated dark steel frame | |
| Chair padding | High-density polyurethane rebound foam | |
| Lumbar cushion pad | Matching fabric-wrapped soft foam insert | |
| Table tabletop | 8 mm thick black matte laminated MDF | |
| Table pedestal base | 1.5 mm thick conical black powder-coated steel | |
| Frame accent hardware | Brushed brass/gold finish steel trim | |
| Chair floor glides | Non-marking plastic foot caps | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm | |
| Tilt Mechanism Plate Thickness | 2.5 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | Fixed circular 4-person layout | |
|---|---|---|
| Table access | Central single pedestal base, no perimeter legs | |
| Chair mobility | Stationary fixed-position seating, no casters or swivel mechanism | |
| Back support design | Curved wrap-around enclosed back with integrated lumbar pad | |
| Armrest structure | Continuous tubular metal frame forming integrated armrests and front legs | |
| Cleaning access | Smooth upholstered surfaces with no recessed tufting | |
| Assembly requirement | Knock-down construction, table base and chair frames attach with included hardware | |
| Floor protection | Non-marking glides on all chair legs and table base | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Office reception and lobby areas | Provides 4-person casual seating for visitor waiting and informal check-in conversations | |
|---|---|---|
| Corporate break and lounge zones | Supports short rest periods and informal small group discussions for staff | |
| Hotel public waiting areas | Matches modern commercial aesthetic for guest seating near elevators or conference entrances | |
| Healthcare and clinic waiting spaces | Easy-to-clean durable upholstery suitable for high-traffic public visitor use | |
| Education and campus common areas | Compact circular layout supports small group collaboration outside classrooms | |
| Recommended configuration | Arrange with 600 mm clearance around the set perimeter for unobstructed pedestrian passage | |
| Surface requirement | Place on level hard flooring or low-pile commercial carpet for stable seating and table placement | |
| Recommended Matching Desk Size | 2.4 m executive desk |
EU Market Access Requirements* EN Standards
| EN 16139:2013 | Strength, durability and safety requirements for non-domestic seating, applies to commercial lounge chairs | |
|---|---|---|
| EN 15372:2016 | Strength, durability and safety requirements for non-domestic tables, applies to reception coffee table | |
| EN 1022:2018 | Stability testing standard for domestic and non-domestic seating, applies to fixed lounge armchairs |
US and Canada office-furniture standards
| ANSI/BIFMA X5.4-2020 | Safety and performance standard for lounge and public area seating, applicable to armchairs | |
|---|---|---|
| ANSI/BIFMA X5.5-2021 | Safety and performance standard for occasional tables, applicable to round coffee table |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to laminated tabletop and structural components | |
|---|---|---|
| GB/T 3325-2017 | General technical requirements for metal furniture, applicable to steel chair frames and table pedestal | |
| GB 18584-2001 | Indoor decoration material limit of harmful substances for wooden furniture, applicable to table core material |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to laminated tabletop and structural components; 2. GB/T 3325-2017: General technical requirements for metal furniture, applicable to steel chair frames and table pedestal; 3. GB 18584-2001: Indoor decoration material limit of harmful substances for wooden furniture, applicable to table core material; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
