| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Single chair overall dimensions | 584 x 635 x 861 mm | |
|---|---|---|
| Chair seat height | 470 mm | |
| Chair seat width | 520 mm | |
| Chair seat depth | 500 mm | |
| Chair back total height above seat | 391 mm | |
| Chair leg splay base diameter | 660 mm | |
| Side table overall dimensions | 508 mm diameter x 508 mm H | |
| Table tabletop thickness | 64 mm | |
| Table flared pedestal base diameter | 420 mm | |
| Set overall circular arrangement diameter | 2200 mm | |
| Floor clearance under chair seat | 180 mm | |
| Floor clearance under tabletop | 420 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Single chair weight capacity | 136 kg | |
|---|---|---|
| Side table top static load capacity | 25 kg | |
| Single chair net weight | 11 kg | |
| Seating capacity | 4 adults | |
| Chair leg floor tip static friction coefficient | 0.6 | |
| Upholstery Martindale abrasion resistance | 30000 cycles | |
| Seat foam density | 45 kg/m³ | |
| Seat foam rebound rate | 55% | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
| Chair upholstery | Red velvet fabric with 0.8mm pile thickness | |
|---|---|---|
| Chair internal seat/back frame | 15mm thick engineered bent wood shell | |
| Seat and back padding | 80mm thick high-density polyurethane foam with fiber wrap | |
| Chair legs | 12mm diameter chrome-plated cold-rolled steel tubing, splayed configuration | |
| Chair foot pads | 15mm diameter non-slip non-marking rubber floor tips | |
| Side table tabletop | Glossy white fiberglass-reinforced composite with smooth sealed finish | |
| Side table pedestal and base | 2mm thick steel with white powder-coated finish, flared circular base | |
| Table base bottom pad | 2mm thick felt ring to protect hard floor surfaces | |
| Seam construction | 6 stitches per inch straight stitching along upholstery edges | |
| Chrome leg plating thickness | 0.02mm decorative chrome finish over nickel undercoat | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame |
Adjustment / rotation / tilt / mobility / storage features
| Seating design | Continuous curved integrated arm/back shell for wrap-around torso support | |
|---|---|---|
| Leg structure | Four splayed metal legs per chair for even weight distribution and tip resistance | |
| Floor protection | Rubber foot pads on all leg ends prevent scratching and reduce movement noise | |
| Table structure | Single central tapered pedestal base creates unobstructed leg room around table | |
| Seating function | Fixed stationary seating with no recline, swivel, or height adjustment mechanisms | |
| Table function | Flat smooth tabletop designed to hold beverages, reading materials, and small decor | |
| Set layout | Circular four-chair arrangement optimized for face-to-face casual conversation | |
| Assembly requirement | Knock-down construction with included hardware for leg and base attachment | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Residential living room lounge | Casual conversation seating for small apartments and modern open-plan living spaces | |
|---|---|---|
| Office reception waiting area | Compact 4-guest seating for informal visitor waiting zones with low-traffic use | |
| Hotel lobby breakout area | Small modular seating clusters for guest relaxation and casual meetings | |
| Retail boutique lounge | Seating for customers to rest while shopping in fashion or lifestyle stores | |
| Studio apartment flexible seating | Space-efficient 5-piece set that fits small urban living spaces without bulk | |
| Breakout collaboration zone | Informal small-group discussion seating for creative office environments | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| EN 16139:2013 | Furniture – Strength, durability and safety for non-domestic seating | |
|---|---|---|
| EN 1022:2018 | Furniture – Seating – Determination of stability | |
| EN 12520:2015 | Furniture – Strength, durability and safety for domestic tables | |
| EN 13722:2004 | Furniture – Test methods for surface resistance to cold liquids for table tops |
US and Canada office-furniture standards
| ANSI/BIFMA X5.1-2017 | General purpose office chairs – strength and durability reference for light lounge seating | |
|---|---|---|
| ANSI/BIFMA X5.5-2021 | Desk products – surface performance reference for pedestal side table tops | |
| ANSI/BIFMA X7.1-2022 | Furniture emissions standard for low-VOC indoor furniture materials |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to internal chair frame components | |
|---|---|---|
| GB/T 3325-2017 | Metal furniture general technical requirements, applicable to chair legs and table base | |
| GB 18584-2001 | Indoor decoration material limit of harmful substances for wooden furniture | |
| GB/T 19001-2016 | Quality management system requirement for furniture manufacturing quality control |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to internal chair frame components; 2. GB/T 3325-2017: Metal furniture general technical requirements, applicable to chair legs and table base; 3. GB 18584-2001: Indoor decoration material limit of harmful substances for wooden furniture; 4. GB/T 19001-2016: Quality management system requirement for furniture manufacturing quality control; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
