Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	820 × 900 × 810 mm
Overall assembled dimensions	820 x 900 x 810 mm
Seat height from floor	480 mm
Seat width between inner arms	660 mm
Seat depth from front edge to backrest	640 mm
Backrest height above seat surface	380 mm
Armrest height above seat surface	180 mm
Seat cushion thickness	150 mm
Base contact width with floor	800 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Recommended static load capacity	150 kg
Net product weight	28 kg
Seat foam density	40 kg/m³
Foam rebound rate	55%
Fabric abrasion resistance	30000 Martindale cycles
Seam stitch pitch	8 stitches per 30 mm
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles
Five-star Base Static Load Reference	Acceptance target ≥120 kg; chair reference load 150 kg

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Internal support frame	18 mm thick engineered plywood
Outer shell upholstery	Dark taupe woven polyester fabric
Seat and front base upholstery	Cream off-white woven polyester fabric
Seat cushion fill	High-density polyurethane foam
Frame padding layer	20 mm thick medium-density foam under outer fabric
Base floor contact pads	3 mm thick non-slip rubber pads
Edge finishing	Matching fabric piping along all curved seams
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel
Five-star Base Material Thickness	Metal base wall 3.5 mm; diameter 700 mm

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Seating configuration	Single-person static fixed seating
Cushion design	Removable recessed seat cushion
Support structure	Continuous wrap-around back and integrated arms
Base design	Fully upholstered enclosed base flush to floor
Stability feature	Wide square floor contact footprint
Care and maintenance	Spot-clean fabric upholstery
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Shipping carton dimensions	850 x 850 x 900 mm
Gross shipping weight	31 kg
Total shipping volume per unit	0.65 CBM
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential living room	Pairs with sofas and coffee tables for additional casual lounge seating
Bedroom reading nook	Compact footprint fits small spaces for relaxed reading and relaxation
Office reception area	Minimalist two-tone design complements modern workspace visitor seating
Hotel lobby lounge zones	Durable construction suitable for light commercial public space use
Boutique waiting areas	Soft curved silhouette creates welcoming seating for hospitality environments
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 1022:2018	Seating furniture stability testing standard, recommended for finished product verification
EN 12520:2015	Domestic seating strength, durability, and safety requirements for residential use

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to framed upholstered seating
GB 18584-2001	Limit of harmful substances in wooden furniture, recommended for indoor air quality compliance
GB/T 19817-2005	Upholstered furniture fabric performance requirements for abrasion and colorfastness

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to framed upholstered seating;
2. GB 18584-2001: Limit of harmful substances in wooden furniture, recommended for indoor air quality compliance;
3. GB/T 19817-2005: Upholstered furniture fabric performance requirements for abrasion and colorfastness;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · LC-BAR-2T820

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · LC-BAR-2T820

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · LC-BAR-2T820Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Two-Tone Curved Barrel Upholstered Lounge Armchair features a streamlined modern minimalist silhouette defined by a smooth, continuous curved barrel form with a seamless wrap-around back and integrated arms. Its distinct two-tone finish uses dark taupe woven polyester fabric for the outer shell and cream off-white woven polyester for the seat and front base, accented by matching fabric piping along all curved seams for a polished, tailored appearance. The chair sits on a fully upholstered enclosed base that sits flush to the floor, with a wide square floor contact footprint for steady, even placement. Built for lasting regular use, the chair’s internal structure relies on engineered plywood frames for the core support, seat, and backrest, lined with a medium-density foam layer under the outer fabric. The removable recessed seat cushion is filled with high-density polyurethane foam, delivering balanced, supportive comfort for extended seating. Non-slip rubber pads fitted to the base’s floor contact points prevent unwanted shifting and protect floor surfaces, while precise, consistent stitching along all seams reinforces upholstery durability. The fabric is engineered to withstand frequent contact, and upholstery can be maintained with simple spot cleaning as needed. As a single-person static fixed seating option, this armchair adapts smoothly to both residential and light commercial settings. In homes, it works alongside sofas and coffee tables in living rooms to add flexible casual lounge seating, and its compact footprint fits neatly into bedroom reading nooks for quiet relaxation. In commercial spaces, its understated two-tone aesthetic complements modern office reception areas for visitor seating, holds up to regular use in hotel lobby lounge zones, and creates a welcoming impression in boutique waiting areas for hospitality settings. When procuring this model, note that final assembly is required, with units shipped across two cartons per set. The fixed static design does not offer adjustable recline for custom positioning, so it is best suited for spaces prioritizing consistent, welcoming lounge-style support rather than highly customizable task seating. Its fully enclosed base creates a clean, uncluttered visual line that aligns with a range of modern, soft contemporary interior palettes.

Two-Tone Curved Barrel Upholstered Lounge Armchair Specifications

Suppliers and stock