| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Chair overall dimensions | 900 x 900 x 990 mm | |
|---|---|---|
| Chair seat width | 760 mm | |
| Chair seat depth | 620 mm | |
| Chair seat height | 390 mm | |
| Chair backrest height | 600 mm | |
| Chair armrest height | 580 mm | |
| Ottoman overall dimensions | 690 x 580 x 380 mm | |
| Ottoman seat cushion thickness | 120 mm | |
| Frame tubing diameter | 16 mm | |
| Under-seat floor clearance | 120 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Total set net weight | 44 kg | |
|---|---|---|
| Chair static weight capacity | 159 kg | |
| Ottoman static weight capacity | 45 kg | |
| Cushion foam density | 40 kg/m³ | |
| Cushion foam rebound rate | 45% | |
| Seam tensile strength at joints | 120 N | |
| Frame static load rating per leg | 100 kg | |
| Limited warranty period | 3 years | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
| Chair and ottoman upholstery | 1.2mm thick tan polyurethane faux leather, abrasion-resistant finish | |
|---|---|---|
| Seat and back cushion fill | High-density polyurethane foam wrapped in 20mm soft polyester fiber | |
| Included lumbar pillow fill | 100% recycled polyester fiber fill, removable cover | |
| Structural frame | 1.5mm thick black powder-coated carbon steel tube sled base | |
| Armrest structure | Padded curved steel frame wrapped in matching tan upholstery | |
| Floor protection pads | 5mm thick non-slip polyethylene glides at all frame contact points | |
| Stitching detail | Polyester bonded thread, 8 stitches per inch seam pitch at all panel joints | |
| Backrest internal support | 8mm thick plywood support panel webbed with 50mm elastic webbing | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm | |
| Tilt Mechanism Plate Thickness | 2.5 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
| Backrest posture | Fixed 110-degree reclined angle optimized for relaxed lounging | |
|---|---|---|
| Ottoman positioning | Free-standing, can be positioned for leg rest or use as extra side seating | |
| Cushion design | Loose, reversible seat cushions for even wear over service life | |
| Lumbar support | Removable matching upholstered lumbar pillow for adjustable lower back support | |
| Frame stability | Continuous sled base design eliminates wobble on low-pile carpet and hard floors | |
| Cushion maintenance | Spot-cleanable upholstery with removable cushion covers via hidden zippers | |
| Floor protection | Integrated glides prevent scuffing and scratching on hard flooring surfaces | |
| Assembly requirement | Knock-down assembly with included hardware, leg attachment to pre-upholstered body | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Residential living room | Pair as primary reading or conversation seating next to side tables | |
|---|---|---|
| Office lounge area | Place in reception or breakout spaces for casual visitor seating | |
| Bedroom reading nook | Position near windows as dedicated relaxed seating for private spaces | |
| Hotel guest room seating | Deploy as premium in-room seating paired with side tables for hospitality use | |
| Open-plan studio apartment | Use as dual-purpose seating and footrest without occupying excess floor space | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| Domestic furniture seating strength | EN 12520:2015 | |
|---|---|---|
| Upholstered furniture ignitability | EN 1021:2014 |
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.4 |
|---|
Standards applicable to China-market projects
| Upholstery furniture safety | GB 28007 | |
|---|---|---|
| Formaldehyde emission limit | GB 18584 |
This product must meet the following technical requirements: 1. Upholstery furniture safety: GB 28007; 2. Formaldehyde emission limit: GB 18584; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
