Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	800 × 800 × 750 mm
Overall set footprint	1800 x 1800 mm
Tabletop thickness	12 mm
Pedestal base diameter (floor contact)	450 mm
Table under-top knee clearance	680 mm
Chair seat height	450 mm
Chair seat dimensions	520 x 480 mm
Chair seat cushion thickness	80 mm
Chair backrest height	490 mm
Chair side cutout handle dimension	180 x 80 mm
Chair leg height	150 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Single chair weight capacity	113 kg
Tabletop static load capacity	50 kg
Set net weight	85 kg
Seating capacity	4 people
Seat foam density	35 kg/m³
Fabric seam stitch pitch	8 mm
Pedestal base stability rating	120 kg static tip load
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Tabletop	12mm polished sintered stone with white marble-vein finish
Table pedestal base	1.5mm thick black powder-coated carbon steel conical frame
Base trim	Polished stainless steel gold-tone ring at pedestal base
Chair outer upholstery	1.0mm thick tan PU faux leather with matte finish
Chair inner upholstery	1.0mm thick cream PU faux leather with matte finish
Seat/back padding	High-density polyurethane foam with 40% rebound rate
Chair internal frame	1.2mm thick powder-coated steel tube frame
Chair legs	25mm diameter black powder-coated steel with gold ABS foot cap
Throw pillows	300mm square, cream faux leather cover with polyester fiber fill
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Table structure	Fixed single central pedestal, no extendable leaves, no swivel top
Chair mobility	Lightweight fixed non-swivel design, integrated side cutout handles for easy repositioning
Floor protection	Non-scratch gold-tipped foot glides on all chair legs and table base
Table surface function	Non-porous sintered stone top resists liquid stains, heat from drinkware, and surface scratches
Assembly requirement	Knock-down assembly required for table base and chair leg attachment
Seating ergonomics	Curved wrap-around arm/back design provides enclosed side support for long seated conversations
Customization support	Multiple upholstery and base finish options available per category reference
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Office reception area	Fits small waiting zones for casual guest meetings and beverage service
Residential lounge and balcony	Serves as compact casual dining or conversation set for small living spaces
Retail and cafe spaces	Provides intimate 4-person seating for boutique shops, cafes and showroom waiting areas
Property sales centers	Used for client consultation and light negotiation in sales office reception zones
Training room breakout areas	Placed in rest zones for short breaks and informal group discussions
Hotel lobby lounge	Configured as small guest seating clusters for high-end public space interiors
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12521:2015	Furniture – Strength, durability and safety for domestic dining tables, applicable for table load testing
EN 1022:2018	Furniture – Seating – Determination of stability, applicable for chair tip-resistance verification
EN 13356:2018	Furniture – Upholstered furniture performance for non-domestic use, applicable for reception space use

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable for furniture structural safety evaluation
GB/T 4893.1-2005	Surface wear resistance test method for furniture finishes, applicable for tabletop durability check
GB 18584-2001	Limit of harmful substances in wooden furniture, applicable for indoor air quality compliance

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for furniture structural safety evaluation;
2. GB/T 4893.1-2005: Surface wear resistance test method for furniture finishes, applicable for tabletop durability check;
3. GB 18584-2001: Limit of harmful substances in wooden furniture, applicable for indoor air quality compliance;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · BS-80R-4CUT-TNC

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · BS-80R-4CUT-TNC

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · BS-80R-4CUT-TNCOpen Export Tool

Quick Actions

Post an RFQ

Product Description

The Modern Glam 4-Seat Round Bistro Conversation Set is an unbranded public seating solution built for compact, stylish social and professional gathering spaces. Visually, the set balances refined glam details with understated modern form: the round table anchors a circular, balanced 1800 x 1800 mm layout, featuring a polished white marble-vein sintered stone top paired with a tapered black powder-coated carbon steel pedestal trimmed with a polished gold-tone stainless steel ring at its floor contact point. The four matching armchairs feature a two-tone matte PU faux leather upholstery scheme, with tan outer surfaces, cream inner seating surfaces, and black powder-coated steel legs finished with gold-tipped foot caps, paired with coordinating 300mm square cream faux leather throw pillows for a cohesive, elevated look. For construction, the table uses a fixed central pedestal design with no extendable leaves or swivel function, with a 12mm thick sintered stone top mounted to a 1.5mm thick conical carbon steel base. Chairs are built on 1.2mm thick powder-coated steel tube frames, padded with high-density 35 kg/m³ polyurethane foam that delivers a 40% rebound rate, with 8mm stitch pitch on all upholstery seams for consistent finish. Each chair supports a 113 kg weight capacity, while the tabletop holds a 50 kg static load, with the pedestal base rated for a 120 kg static tip load for stable placement. Non-scratch glides on all contact points protect flooring from scuffs during repositioning, and integrated side cutout handles on the fixed, non-swivel chairs make lightweight reconfiguration simple. The non-porous tabletop resists liquid stains, drinkware heat, and surface scratches for low-maintenance use, while the curved wrap-around arm and back design delivers enclosed side support to keep guests comfortable during extended conversations. Assembly requires attachment of the table base and chair legs, with a typical assembly time of 40 minutes per set, shipped across two cartons. This set is suited for a wide range of public and semi-public spaces, including office reception waiting zones, compact residential lounges and balconies, boutique cafes and retail showrooms, property sales center consultation areas, training room breakout spaces, and high-end hotel lobby lounge clusters. When procuring, teams should note that multiple upholstery and base finish options are available to match existing interior palettes, plan for 40 minutes of on-site assembly per unit, and account for the fixed 4-person seating capacity when mapping space layouts, with 135 sets fitting a 20GP shipping container at 85% space utilization for large-scale rollouts.

Modern Glam 4-Seat Round Bistro Conversation Set with Upholstered Armchairs Specifications

Suppliers and stock