Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	2400 × 2400 × 860 mm
Set overall footprint	2400 x 2400 mm
Armchair seat height	480 mm
Armchair seat surface dimensions	500 x 480 mm
Seat cushion thickness	100 mm
Armrest height from floor	720 mm
Coffee table top thickness	20 mm
Table base footplate diameter	450 mm
Table conical base top diameter	80 mm
Chair leg taper diameter at floor	20 mm
Floor clearance under chair seat	280 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Per-seat static weight capacity	150 kg
Table top distributed static load capacity	50 kg
Single armchair net weight	14 kg
Seat foam density	24 kg/m³
Powder coat finish abrasion resistance	Grade 2
Recommended maximum occupancy	4 persons
Frame static load cycle rating	10000 cycles
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Chair upholstery	Mint green polyester velvet fabric
Chair seat/back filling	High-density polyurethane foam
Included throw cushions	Matching mint green fabric with polyfiber fill
Chair leg frame	Matte black powder-coated 1.2mm thick steel tube
Chair under-seat support frame	Black powder-coated steel perimeter rail
Floor protection glides	Injection-molded nylon glides at leg bases
Coffee table top	White marble-look engineered stone with sealed polished finish
Coffee table base column	Tapered conical black powder-coated 1.5mm thick steel
Coffee table footplate	Round flat black powder-coated steel base plate
Table connecting hardware	Zinc-plated steel bolt fasteners
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Seating configuration	Radial face-to-face 4-person layout
Chair support design	Fixed 4-leg non-swivel non-reclining structure
Table support structure	Single central pedestal base
Floor protection	Non-marking nylon glides on all chair and table contact points
Cleaning compatibility	Dry vacuum and upholstery shampoo safe for fabric surfaces
Assembly requirement	Tooled leg attachment for chairs, base-to-top attachment for table
Color consistency	Uniform mint green upholstery and matte black metal finish across set
Surface utility	Smooth sealed table top suitable for drinkware, reading materials, and small decor
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Office reception waiting areas	Casual face-to-face seating for visitors adjacent to entrance glazing
Corporate lounge breakout spaces	Relaxed informal seating for short breaks or small impromptu meetings
Hotel lobby seating zones	Cohesive low-profile seating for guest waiting and casual conversation
Public building atriums	Durable fixed seating for high-traffic public indoor common areas
Healthcare waiting rooms	Easy-to-clean soft seating for patient and visitor waiting areas
Co-working facility common areas	Small conversation nooks for members between work sessions

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 13761:2002	Furniture - Seating for public areas, performance requirements for reception lounge chairs
EN 15372:2008	Furniture - Strength, durability and safety for non-domestic tables, applicable to coffee table
EN 1022:2018	Furniture - Seating determination of stability, applicable to lounge armchairs

STANDARD S2

North America Purchasing & Inspection Reference * ANSI/BIFMA Standards

US and Canada office-furniture standards

ANSI/BIFMA X5.4-2020	Lounge and public seating performance standard, recommended for chair validation
ANSI/BIFMA X5.5-2021	Desk and table products performance standard, applicable to lounge coffee table
ANSI/BIFMA e3-2019	Furniture sustainability standard, recommended for commercial procurement criteria

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to stone-top table structure
GB/T 3325-2017	Metal furniture general technical requirements, applicable to steel frames and bases
GB 20400-2006	Leather and fur limit of harmful substances, applicable if fabric has coated finishes
GB/T 19001-2016	Quality management system requirement for commercial furniture supply

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to stone-top table structure;
2. GB/T 3325-2017: Metal furniture general technical requirements, applicable to steel frames and bases;
3. GB 20400-2006: Leather and fur limit of harmful substances, applicable if fabric has coated finishes;
4. GB/T 19001-2016: Quality management system requirement for commercial furniture supply;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · LNG-SET-4C-MT80

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · LNG-SET-4C-MT80

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · LNG-SET-4C-MT80Open Export Tool

Quick Actions

Post an RFQ

Product Description

This 4-Seat Commercial Lounge Conversation Set with Round Marble-Look Coffee Table, model LNG-SET-4C-MT8, delivers a cohesive, purpose-built seating solution for high-traffic indoor public and commercial spaces, presented as an unbranded, value-aligned furnishing set. Its visual design centers on a curated radial layout, where four curved barrel-back armchairs are positioned in a face-to-face arrangement around a central round coffee table, creating an intimate, inviting conversation nook with a unified, polished aesthetic. Each armchair is upholstered in soft mint green polyester velvet, accented by matching mint green polyfiber-filled throw cushions, with all metal components finished in a consistent matte black powder coat that contrasts cleanly with the table’s bright white marble-look engineered stone top. Construction balances durability and comfort: chair frames use 1.2mm thick matte black powder-coated steel tube legs supported by an under-seat steel perimeter rail, with seats and backs padded with high-density 24 kg/m³ polyurethane foam. The 100mm thick seat cushions sit at a 480mm seat height, with armrests positioned 720mm from the floor, while injection-molded non-marking nylon glides at all chair and table contact points protect flooring surfaces. The coffee table features a 20mm thick sealed polished engineered stone top supported by a tapered conical 1.5mm thick powder-coated steel column anchored to a round flat steel footplate, creating a stable pedestal base with no obstructive legs around the seating perimeter. Functionally, the set supports a maximum occupancy of 4 people, with each fixed non-swivel, non-reclining chair rated for 150kg static weight capacity, and the table top rated for 50kg distributed static load. The powder coat finish carries Grade 2 abrasion resistance, with frames tested to 10000 static load cycles for long-term commercial use. Fabric surfaces are compatible with dry vacuuming and upholstery shampoo for straightforward maintenance, and assembly requires tooled attachment of chair legs and connection of the table base to its top, with a reference assembly time of 40 minutes per set. The full set occupies a 2400 x 2400 mm footprint, and ships in two cartons with a total packaged gross weight of 90kg. It is well suited for office reception waiting areas, corporate breakout lounges, hotel lobby seating zones, public building atriums, healthcare waiting rooms, and co-working facility common areas, supporting casual conversation, short breaks, impromptu small meetings, and visitor waiting use cases. Procurement teams should note the set is designed exclusively for indoor use, plan for standard tooled assembly on site, and account for the two-carton shipping configuration when coordinating receiving and installation. Uniform color consistency across all upholstered and metal components ensures a polished, coordinated look without mismatched finishes across units.

4-Seat Commercial Lounge Conversation Set with Round Marble-Look Coffee Table Specifications

Suppliers and stock