Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	762 × 762 × 730 mm
Overall set footprint (4 chairs arranged around table)	1800 x 1800 mm
Table base (pedestal foot) diameter	450 mm
Table underside knee clearance	680 mm
Chair seat height (from floor to seat top)	480 mm
Chair seat usable dimensions	520 mm W x 600 mm D
Chair back height above seat	490 mm
Chair gold base trim width	20 mm
Clearance between chair seat and table edge	200 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Total set net weight	118 kg
Single chair static load capacity	150 kg
Recommended seating capacity	4 people
Tabletop surface abrasion resistance	3000 cycles
Upholstery seam stitch pitch	8 stitches per inch
Chair cushion foam density	38 kg/m³
Table base anti-wobble static stability load	20 kg lateral force
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Tabletop	18mm thick MDF core with white faux marble printed laminate, waterproof scratch-resistant top coating
Table pedestal and base plate	1.5mm thick iron tube with polished gold electroplated finish, weighted cast iron bottom plate
Chair outer lower upholstery	Orange matte leatherette (PU fabric) with stain-resistant wipe-clean surface
Chair upper back and arm upholstery	Cream white linen-blend soft fabric
Chair cushion and back padding	80mm thick high-density polyurethane foam with 10mm soft Dacron top layer
Chair internal frame	25mm thick kiln-dried solid hardwood + 1.2mm steel support brackets
Chair decorative trim and base ring	1.2mm thick stainless steel with polished gold PVD finish
Floor contact pads	5mm thick non-slip felt pads fixed to all chair and table base bottom edges
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Seating configuration	4 symmetrically arranged enclosed barrel chairs with 360° unobstructed table access
Chair motion	Stationary fixed base design with no swivel or tilt mechanism
Chair back support	Curved wrap-around back and integrated armrests providing full upper body lateral support
Table surface use	Suitable for beverage service, small decor display, and light casual work tasks
Assembly requirement	Knock-down construction requiring attachment of table pedestal to top and chair base trim
Floor protection	Non-marking felt glides on all base contact points prevent hard floor scratches
Cleaning and maintenance	Smooth non-porous surfaces allow spot cleaning with damp soft cloth, no harsh chemical cleaners required
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Office reception and waiting areas	Compact 4-seat configuration supports casual visitor conversation without large space requirements
Hotel lobby and lounge corners	Luxury two-tone gold trim design matches modern boutique hospitality interior aesthetics
Residential living room conversation nooks	Small footprint fits near windows or open-plan lounge areas for small group seating
Cafe and casual co-working breakout spaces	Wipe-clean surfaces support frequent light use for coffee meetings and short work sessions
Balcony and enclosed sunroom seating	Stable pedestal base and durable upholstery suit semi-outdoor sheltered environments
Exhibition and showroom display areas	Coordinated 5-piece set creates curated styling points for commercial real estate showcases
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12521:2015	Strength, durability and safety requirements for domestic seating, applicable to accent chair structural performance
EN 15372:2016	Safety, strength and durability requirements for domestic tables, applicable to bistro table structural stability
EN 1022:2019	Furniture seating stability test method, applicable for stationary chair tip resistance verification

STANDARD S2

North America Purchasing & Inspection Reference * ANSI/BIFMA Standards

US and Canada office-furniture standards

ANSI/BIFMA X5.1-2017	Office seating performance standard (light commercial use reference), applicable for reception lounge seating durability
ANSI/BIFMA X5.5-2021	Desk/table products performance standard (light commercial use reference), applicable for bistro table load testing

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to MDF tabletop and hardwood chair frame structural safety
GB/T 16799-2008	Performance requirements for polyurethane leather upholstery, applicable to orange PU outer chair fabric
GB 18584-2001	Limit of harmful substances for wooden furniture interior materials, applicable for indoor air quality compliance

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to MDF tabletop and hardwood chair frame structural safety;
2. GB/T 16799-2008: Performance requirements for polyurethane leather upholstery, applicable to orange PU outer chair fabric;
3. GB 18584-2001: Limit of harmful substances for wooden furniture interior materials, applicable for indoor air quality compliance;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · BIS-SET-4CH-GLD-MBL-01

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · BIS-SET-4CH-GLD-MBL-01

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · BIS-SET-4CH-GLD-MBL-01Open Export Tool

Quick Actions

Post an RFQ

Product Description

This 5-piece round bistro conversation set includes one round tulip-pedestal side table and four enclosed barrel accent armchairs, defined by a sleek modern luxury aesthetic. Its visual design centers on a polished gold pedestal base paired with a crisp white faux marble tabletop, complemented by two-tone seating: warm orange matte leatherette covers the lower chair sections, while soft cream white linen-blend fabric wraps the upper back and integrated armrests. Slim polished gold metal trim traces each chair base, tying the coordinated palette together for a refined, curated look. When arranged symmetrically around the table, the set forms a balanced, accessible layout with 360-degree unobstructed access to the table surface, creating an intimate seating circle ideal for casual interaction.
The set is built for durable, long-term use across residential and commercial settings. The table features an 18mm thick MDF core topped with waterproof, scratch-resistant white faux marble laminate, supported by a 1.5mm thick polished gold electroplated iron pedestal anchored to a weighted cast iron base plate. Each chair uses a kiln-dried solid hardwood internal frame reinforced with steel support brackets, fitted with 80mm thick high-density polyurethane foam cushions topped with a soft Dacron layer for consistent, comfortable support. Chair upholstery combines stain-resistant, wipe-clean leatherette for lower sections and soft linen-blend fabric for upper contact points, with decorative 1.2mm polished gold stainless steel trim at the base. Non-slip, non-marking felt pads line all floor contact points on both the table and chairs to prevent hard surface scratches.
Practically, the set accommodates four people with fixed, stationary chair bases that offer no swivel or tilt movement, prioritizing stable seating. The curved wrap-around chair backs and integrated armrests deliver full upper body lateral support for relaxed lounging, while the table surface works well for beverage service, small decor display, and light casual work tasks. Spot cleaning with a damp soft cloth is sufficient for regular maintenance, as harsh chemical cleaners are not required for the smooth non-porous surfaces. The knock-down construction requires attaching the table pedestal to its top and securing chair base trim during assembly, a process that takes 40 minutes to complete.
This set fits a wide range of spaces: compact office reception and waiting areas, boutique hotel lobby corners, residential living room window nooks, cafe and co-working breakout zones, sheltered semi-outdoor balconies and sunrooms, and commercial exhibition or real estate showroom displays. When procuring, note that the unit ships in two cartons, with fixed dimensional and weight profiles for freight planning, and that seating is designed for static loads aligned with the stated per-chair capacity.

5-Piece Round Bistro Conversation Set with Two-Tone Barrel Accent Chairs Specifications

Suppliers and stock