Caramel Faux Leather Barrel Accent Armchair with Throw Pillow and Black Metal Legs (model ARM-BRL-ORA-001) is listed under Lounge discussion sofa. Dimensions: 860 × 780 × 800 mm. Materials: 1.0mm thick caramel faux leather (PU) with scratch-resistant, wipe-clean finish. Load capacity: 150 kg. Product Features: Modern,light,luxury,style,fixed,stationary,structure,upholstered,soft,seating. This page consolidates 6 groups of specifications and GB / EN standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Brand | JUESHANGDA | Model | ARM-BRL-ORA-001 |
| Overall dimensions (W × D × H) | 860 × 780 × 800 mm | Seat height | 470 mm |
| Seat width | 680 mm | Seat depth | 580 mm |
| Backrest height | 420 mm | Armrest height above seat | 180 mm |
| Under-seat clearance | 150 mm | Leg diameter | 18 mm |
| Included throw pillow dimensions | 400 x 400 mm | Required entry clearance | 1090 mm |
| Finished Seat Cushion Thickness | 90 mm | Backrest Padding Thickness | 70 mm |
| Lumbar Support Zone Height | 240 mm | Clear Width Between Armrests | 540 mm |
| Recommended static load capacity | 150 kg | Net weight | 18 kg |
| Seat foam density | 45 kg/m³ | Seat foam rebound rate | 60% |
| Back foam density | 30 kg/m³ | Martindale abrasion resistance | 50000 cycles |
| Seam stitch pitch | 8 stitches per 30mm | Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
| Back Foam Density Reference | 38 kg/m³ | Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles |
| Upholstery surface | 1.0mm thick caramel faux leather (PU) with scratch-resistant, wipe-clean finish | Seat cushion core | High-density polyurethane foam wrapped with soft polyester fibre layer |
| Backrest core | Medium-density polyurethane foam with vertical channel tufting detailing | Internal support frame | 1.2mm thick powder-coated steel tube frame |
| Support legs | Splayed 18mm diameter matte black powder-coated iron legs | Included throw pillow | Woven polyester fabric with dark vertical stripes, filled with hollow polyester fibre |
| Leg foot pads | Non-slip PE plastic floor protection pads fitted to each leg base | Seat edge finishing | Tight tailored upholstery with rounded stitched perimeter |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm | Tilt Mechanism Plate Thickness | 2.5 mm cold-rolled steel |
| Base structure | Fixed stationary non-swivel, non-reclining, non-rocking four-leg base | Back support | Integrated wrap-around barrel back enclosing seated user for lateral support |
| Arm support | Continuous sloped integrated armrests connected directly to backrest frame | Floor protection | Non-marking foot pads prevent scuffing to hard floor surfaces under load |
| Accessory inclusion | One matching striped accent throw pillow included for lumbar support | Assembly requirement | Partial knock-down assembly requiring leg attachment to seat frame |
| Cleaning function | Faux leather surface supports wipe-clean maintenance with damp cloth | Recline Angle / Lock Reference | 125° with 3suggested lock positions |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | Height Adjustment Stroke | 100 mm continuous travel |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement | Reference Package Count | 1 set / 2 cartons |
| Reference Assembly Time | 40 minutes per set | Reference Carton Dimensions | 850× 420× 720 mm |
| Reference Packaged Gross Weight | 23 kg/set | Reference Carton Volume | 0.26 m³/set |
| Indicative 20GP Loading | 135 sets at 85% space utilization | Indicative 40HQ Loading | 320 sets at 85% space utilization |
| Living room accent seating | Placed beside sofas or coffee tables for supplementary guest seating | Bedroom reading corner | Positioned near windows or bookshelves for relaxed single-person seating |
| Office reception area | Used in lobby or waiting zones for visitor seating | Studio apartment compact seating | Suitable for small space layouts due to rounded space-efficient silhouette |
| Commercial lounge space | Deployed in cafe, co-working or hotel lounge break-out areas | Vanity seating application | Paired with dressing tables for upright comfortable seating |
| Recommended Matching Desk Size | 2.4 m executive desk | Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 860 × 780 × 800 mm | |
|---|---|---|
| Seat height | 470 mm | |
| Seat width | 680 mm | |
| Seat depth | 580 mm | |
| Backrest height | 420 mm | |
| Armrest height above seat | 180 mm | |
| Under-seat clearance | 150 mm | |
| Leg diameter | 18 mm | |
| Included throw pillow dimensions | 400 x 400 mm | |
| Required entry clearance | 1090 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Recommended static load capacity | 150 kg | |
|---|---|---|
| Net weight | 18 kg | |
| Seat foam density | 45 kg/m³ | |
| Seat foam rebound rate | 60% | |
| Back foam density | 30 kg/m³ | |
| Martindale abrasion resistance | 50000 cycles | |
| Seam stitch pitch | 8 stitches per 30mm | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Upholstery surface | 1.0mm thick caramel faux leather (PU) with scratch-resistant, wipe-clean finish | |
|---|---|---|
| Seat cushion core | High-density polyurethane foam wrapped with soft polyester fibre layer | |
| Backrest core | Medium-density polyurethane foam with vertical channel tufting detailing | |
| Internal support frame | 1.2mm thick powder-coated steel tube frame | |
| Support legs | Splayed 18mm diameter matte black powder-coated iron legs | |
| Included throw pillow | Woven polyester fabric with dark vertical stripes, filled with hollow polyester fibre | |
| Leg foot pads | Non-slip PE plastic floor protection pads fitted to each leg base | |
| Seat edge finishing | Tight tailored upholstery with rounded stitched perimeter | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm | |
| Tilt Mechanism Plate Thickness | 2.5 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Base structure | Fixed stationary non-swivel, non-reclining, non-rocking four-leg base | |
|---|---|---|
| Back support | Integrated wrap-around barrel back enclosing seated user for lateral support | |
| Arm support | Continuous sloped integrated armrests connected directly to backrest frame | |
| Floor protection | Non-marking foot pads prevent scuffing to hard floor surfaces under load | |
| Accessory inclusion | One matching striped accent throw pillow included for lumbar support | |
| Assembly requirement | Partial knock-down assembly requiring leg attachment to seat frame | |
| Cleaning function | Faux leather surface supports wipe-clean maintenance with damp cloth | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Living room accent seating | Placed beside sofas or coffee tables for supplementary guest seating | |
|---|---|---|
| Bedroom reading corner | Positioned near windows or bookshelves for relaxed single-person seating | |
| Office reception area | Used in lobby or waiting zones for visitor seating | |
| Studio apartment compact seating | Suitable for small space layouts due to rounded space-efficient silhouette | |
| Commercial lounge space | Deployed in cafe, co-working or hotel lounge break-out areas | |
| Vanity seating application | Paired with dressing tables for upright comfortable seating | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Strength, durability and safety requirements for domestic seating furniture | |
|---|---|---|
| EN 1021-1:2014 | Ignition resistance standard for upholstered furniture (cigarette test) |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements applicable for wooden and metal household furniture | |
|---|---|---|
| GB 28007-2011 | Formaldehyde emission limits applicable for upholstered furniture components |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements applicable for wooden and metal household furniture; 2. GB 28007-2011: Formaldehyde emission limits applicable for upholstered furniture components; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp