Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	910 × 860 × 820 mm
Overall assembled dimensions	910 x 860 x 820 mm
Seat height from floor	470 mm
Seat cushion width	640 mm
Seat cushion depth	550 mm
Seat cushion thickness	190 mm
Backrest height from seat surface	410 mm
Armrest height from seat surface	210 mm
Leg height from floor to seat base	230 mm
Metal leg diameter	20 mm
Floor glide diameter	25 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Net product weight	17 kg
Maximum static user weight capacity	113 kg
Seat foam density	35 kg/m³
Foam rebound rate	45%
Velvet upholstery abrasion resistance	30000 Martindale cycles
Static load capacity per leg	60 kg
Seam stitch pitch	3 stitches per cm
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Upholstery fabric	100% polyester velvet, 0.8mm face thickness, bright blue finish
Internal structural frame	18mm thick manufactured plywood frame, corner blocked for rigidity
Seat support layer	High-strength sinuous spring support under foam cushion
Cushion padding	35kg/m³ high-density polyurethane foam, wrapped in soft polyester batting
Support legs	1.2mm thick steel tubing, polished gold electroplated finish, tapered splayed design
Floor protection pads	Injection-molded plastic glides, non-marking, fitted to each leg base
Stitching thread	High-tenacity polyester thread, color-matched to blue velvet
Backrest channel structure	Foam-filled vertical channels, stitched to form consistent curved ridges
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Seating function	Fixed single-person lounge seating, no recline, swivel or rocking mechanism
Assembly requirement	Leg attachment to pre-assembled upholstered body, no special tools required
Floor protection	Non-marking plastic glides prevent scratches on hard tile or wood flooring
Back support	Wraparound barrel back provides upper back and partial side support for relaxed seating
Integrated arm support	Continuous curved armrests integrated with backrest, padded at matching seat height
Cleaning requirement	Spot clean with dry soft cloth, avoid liquid saturation to prevent velvet water marks
Structural stability	Splayed four-leg layout provides 700mm support footprint to resist tipping
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Living room accent seating	Placed beside sofas or coffee tables as decorative additional guest seating
Bedroom vanity seating	Used at dressing tables for upright, comfortable seated grooming tasks
Entry reception seating	Positioned in entryways or small reception areas for short-term visitor seating
Office lounge breakout seating	Deployed in office break areas for informal, relaxed short-duration seating
Small apartment space seating	Sized for compact urban apartments where space is limited for single-person use
Recommended surface placement	Hard tile, wood or low-pile carpeted floors with non-marking glides
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 1022:2019	Domestic furniture seating stability test requirement for residential accent chairs
EN 12520:2015	Domestic furniture seating strength, durability and safety requirement

STANDARD S2

North America Purchasing & Inspection Reference * ANSI/BIFMA Standards

US and Canada office-furniture standards

North America procurement and testing reference	Recommended references: ANSI/BIFMA X5.4

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

No standards data is available for this market.

Standardized tender description text

This product must meet the following technical requirements:
1. Technical standards and test reports must be supplied during tender or purchase confirmation;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · ACC-BL-VEL-GBL-01

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · ACC-BL-VEL-GBL-01

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · ACC-BL-VEL-GBL-01Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Blue Velvet Channel-Tufted Barrel Accent Armchair with Gold Metal Legs (model ACC-BL-VEL-GBL-01, unbranded lounge and accent seating category) features a refined, compact silhouette defined by its wraparound curved barrel back, vertical channel-tufted detailing that creates consistent soft ridges across the backrest, and tapered splayed gold-finish legs. Its fully assembled form balances soft, tactile upholstery with sleek metallic accents, with continuous curved armrests integrated seamlessly into the backrest structure for a cohesive, streamlined visual presence suited to both decorative and functional placement. The chair is built on an 18mm thick manufactured plywood internal frame with corner blocking for structural rigidity, supported by a 14mm bent plywood seat support board and high-strength sinuous springs beneath the cushion. Upholstered in 100% bright blue polyester velvet with a 0.8mm face thickness, the seat and channeled backrest are padded with 35kg/m³ high-density polyurethane foam wrapped in soft polyester batting, with high-tenacity color-matched polyester thread stitching at 3 stitches per cm. The 1.2mm thick steel tube legs feature a polished gold electroplated finish, fitted with non-marking injection-molded plastic glides at the base to protect floor surfaces. As a fixed, non-reclining, non-swivel, non-rocking single-person seat, it delivers wraparound upper back and partial side support for relaxed upright seating, with padded armrests positioned 210mm above the seat surface for comfortable arm placement. The splayed four-leg layout creates a stable footprint to resist tipping, and the velvet upholstery holds up to regular light use, requiring only spot cleaning with a dry soft cloth to avoid water marks. Assembly is straightforward, requiring only attachment of the legs to the pre-assembled upholstered body with no special tools, taking roughly 40 minutes to complete, with all components shipped across two cartons per set. This chair is suited for a range of indoor settings: it works as decorative accent seating next to living room sofas or coffee tables for extra guests, as comfortable seating at bedroom vanities for grooming tasks, as short-term visitor seating in entryways or small reception zones, as informal breakout seating in office lounge areas, and as space-efficient single-person seating for compact urban apartments. It performs best on hard tile, wood, or low-pile carpeted surfaces. For procurement, note the 113kg maximum static user weight capacity, 17kg net weight per unit, and 135-set maximum load for a 20GP container at 85% space utilization, with a packaged gross weight of 23kg per set to align with shipping and handling planning.

Blue Velvet Channel-Tufted Barrel Accent Armchair with Gold Metal Legs Specifications

Suppliers and stock