| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions | 1800 x 330 x 1800 mm | |
|---|---|---|
| Single bay width | 900 mm | |
| Top open shelf depth | 200 mm | |
| Bottom open shelf depth | 300 mm | |
| Vertical clearance between open shelves | 330 mm | |
| Lower cabinet height | 600 mm | |
| Lower cabinet internal depth | 280 mm | |
| Individual cabinet door dimensions | 450 x 580 mm | |
| Leveling foot adjustment height | 15 mm | |
| Floor clearance under cabinet base | 20 mm | |
| Metal frame tube profile | 25 x 25 mm | |
| Shelf panel thickness | 18 mm | |
| Cabinet door panel thickness | 16 mm | |
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Total static load capacity | 330 kg | |
|---|---|---|
| Net product weight | 55 kg | |
| Hinge open/close cycle rating | 50000 cycles | |
| Wall anti-tip connection load rating | 50 kg | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Upright frame | Powder-coated matte black steel square tube | |
|---|---|---|
| Open shelf panels | Dark walnut-look engineered wood with melamine laminate | |
| Cabinet door panels | Medium density fiberboard with matte grey laminate | |
| Cabinet carcass | Particleboard core with matching dark laminate | |
| Hardware | Zinc-plated steel hinges, screws, and wall anchors | |
| Leveling feet | Reinforced nylon with threaded steel insert |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Leveling adjustment | Threaded feet rotate to adjust height 15mm for uneven floors | |
|---|---|---|
| Enclosed storage | Four flat-panel doors conceal lower cabinet storage for clutter control | |
| Anti-tip safety | Wall anchor straps secure top of frame to wall to prevent tipping | |
| Leaning installation | Freestanding unit rests against wall with frame angled slightly backward |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Home office book storage | Holds books, files, and office supplies with concealed clutter storage below | |
|---|---|---|
| Living room display storage | Displays decor and collectibles on open shelves with hidden media storage |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Domestic and kitchen storage furniture safety requirements, applicable to cabinet units | |
|---|---|---|
| EN 1022:2018 | Domestic furniture seating/storage stability test methods |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to wood cabinet components | |
|---|---|---|
| GB/T 17657-2013 | Test methods for surface properties of wood-based furniture panels | |
| GB 28007-2011 | Furniture safety general requirements, applicable to anti-tip performance |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to wood cabinet components; 2. GB/T 17657-2013: Test methods for surface properties of wood-based furniture panels; 3. GB 28007-2011: Furniture safety general requirements, applicable to anti-tip performance; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp