Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	430 × 430 × 340 mm
Seat diameter	429 mm
Seat height from floor	338 mm
Seat edge thickness	40 mm
Pedestal stem diameter at narrowest point	120 mm
Base four-lobed footprint width	380 mm
Base floor contact edge height	8 mm
Seat concave depression depth	12 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Net weight	1.9 kg
Recommended static load capacity	195 kg
Structural compression cycle rating	10000 cycles
Surface scratch resistance	2H pencil hardness
Stackable quantity for storage	6 units
Color fade resistance for indoor use	300 hours UV exposure
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles
Five-star Base Static Load Reference	Acceptance target ≥120 kg; chair reference load 150 kg

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Seat structure	Thickened injection-molded PP copolymer
Surface finish	High-gloss UV-stabilized polished coating
Pedestal stem	Integrally molded PP with internal rib reinforcement
Flared base	Single-mold PP with four rounded contact lobes
Bottom traction pads	Injection-molded non-slip TPE pads at each base lobe
Wall thickness (seat/frame)	4 mm uniform molded wall thickness
Edge treatment	Rounded smooth molded edges with no sharp corners
Colorant	Pantone-matched high-concentration yellow masterbatch
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Seating function	Single-person backless low seating for temporary or accent use
Cleaning function	Smooth non-porous surface wipes clean with standard household disinfectants
Stability function	Flared four-lobed base distributes weight to reduce tipping risk
Mobility function	Lightweight monolithic design allows single-hand repositioning between rooms
Anti-slip function	Floor contact pads prevent sliding on hard smooth tile or wood floors
Storage function	Vertical stacking of multiple units reduces storage footprint by 60%
Grip feature	Molded seat indentations provide positioning guidance and carry points
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential entryway	Low-profile shoe-changing seating that fits compact entry spaces
Living room accent seating	Retro space-age decorative extra seating for casual guest use
Bathroom waterproof seating	Non-porous moisture-resistant surface for shower or bath adjacent use
Children’s play area	Lightweight tip-resistant seating for playrooms or activity spaces
Commercial pop-up space	Stackable movable seating for temporary events or retail display settings
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 1728:2014	Domestic furniture seating test methods for strength, durability and stability, recommended for acceptance
EN 1022:2018	Domestic seating stability test standard to verify tip resistance under normal use

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for plastic household furniture, recommended for dimensional and stability checks
GB/T 2828.1-2012	Sampling inspection procedures for incoming quality verification of finished units

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for plastic household furniture, recommended for dimensional and stability checks;
2. GB/T 2828.1-2012: Sampling inspection procedures for incoming quality verification of finished units;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · PLS-MSH-034Y

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · PLS-MSH-034Y

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · PLS-MSH-034YOpen Export Tool

Quick Actions

Post an RFQ

Product Description

The Glossy Yellow Monobloc Molded Plastic Mushroom Low Stool (model PLS-MSH-034Y) is an unbranded backless low seating solution defined by its retro mushroom-inspired silhouette. Its continuous, single-form profile pairs a wide, circular concave seat with a centrally positioned tapered pedestal stem that flares into a four-lobed rounded base, creating a cohesive, sculptural visual presence finished in a vibrant high-gloss yellow hue calibrated to exact Pantone color standards. The compact, low-profile form fits unobtrusively into tight layout footprints without overwhelming surrounding design elements, while smooth rounded edges eliminate sharp corners for a soft, approachable aesthetic.
Constructed as a monobloc unit from thickened injection-molded PP copolymer, the stool features uniform 4mm molded wall thickness across its seat and frame, with an internal rib-reinforced pedestal stem and single-mold flared base for structural integrity. The seat incorporates a 14mm internal bent plywood support board beneath its surface, finished with a high-gloss UV-stabilized polished coating that delivers 2H pencil hardness scratch resistance and reliable color fade performance under 300 hours of indoor UV exposure. Each of the base’s four rounded contact lobes is fitted with an injection-molded non-slip TPE traction pad, and all edges are molded to a smooth, rounded finish with no sharp points.
Designed for single-person temporary or accent seating, the stool offers practical functionality for varied use cases: its smooth non-porous surface wipes clean easily with standard household disinfectants, while the flared four-lobed base distributes weight evenly to reduce tipping risk. The lightweight 1.9kg monolithic design allows single-hand repositioning between spaces, and integrated molded seat indentations serve both as seating positioning guides and convenient carry points. Non-slip base pads prevent sliding on hard smooth tile or wood floors, and units stack vertically to reduce storage footprint by 60%, with a maximum stack of six units for efficient storage. The stool supports a recommended static load capacity of 195kg, with a structural compression cycle rating of 10000 cycles for long-term regular use.
This stool is suitable for a wide range of both residential and commercial spaces: it works as compact shoe-changing seating in residential entryways, retro decorative extra seating for casual guests in living rooms, moisture-resistant waterproof seating adjacent to showers or baths in bathrooms, tip-resistant lightweight seating in children’s play areas, and easily movable stackable seating for temporary commercial pop-up events or retail display settings. It is also specified to pair appropriately with 2.4m executive desks in workspace layouts.
For procurement planning, note that each set ships across two cartons, with a reference assembly time of 40 minutes per set. Packaged units have a gross weight of 23kg per set and occupy 0.26 cubic meters of carton volume, allowing 135 sets to be loaded in a 20GP container at 85% space utilization for bulk order planning.

Glossy Yellow Monobloc Molded Plastic Mushroom Low Stool Specifications

Suppliers and stock