| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall cabinet dimensions | 1500 x 400 x 840 mm | |
|---|---|---|
| Top surface thickness | 18 mm | |
| Side panel thickness | 15 mm | |
| Back panel thickness | 3 mm | |
| Left closed cabinet compartment width | 500 mm | |
| Right closed cabinet compartment width | 500 mm | |
| Central open storage section width | 500 mm | |
| Plinth base height | 100 mm | |
| Upper open shelf clearance height | 300 mm | |
| Lower open shelf clearance height | 320 mm | |
| Open shelf depth | 370 mm | |
| Door panel thickness | 18 mm | |
| Corner radius on left edge | 50 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Top surface static load capacity | 110 kg | |
|---|---|---|
| Net product weight | 48 kg | |
| Door hinge cycle rating | 50000 open/close cycles | |
| Recommended maximum evenly distributed total load | 220 kg | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Cabinet carcase | E1 grade 15mm particleboard with matte taupe laminate finish | |
|---|---|---|
| Door panels | 18mm MDF with scratch-resistant matte lacquer coating, handleless push-to-open design | |
| Top surface | 18mm substrate with stone-look heat-resistant laminate, eased rounded edges | |
| Accent trim below top | Warm walnut-toned wood veneer wrapped MDF accent strip | |
| Open shelf panels | 15mm engineered wood with matching matte taupe finish, fixed central divider | |
| Plinth base | 15mm engineered wood with matching finish, recessed 20mm from front face |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Door operation | Push-to-open handleless mechanism with soft-close 110-degree hinges | |
|---|---|---|
| Closed cabinet storage | Each side cabinet includes one adjustable height shelf with 5 position options | |
| Open display storage | Central section divided by one fixed shelf into two open display compartments | |
| Safety design | Rounded front and side corners eliminate sharp edge impact risks |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Dining room buffet | Place against dining wall to store tableware and display decor, with 840mm height aligned to dining sightlines | |
|---|---|---|
| Living room console | Position behind sofa or along living wall for media accessory storage and curated item display |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Domestic and kitchen storage units and worktops - safety requirements and test methods | |
|---|---|---|
| EN 12521:2015 | Furniture - strength, durability and safety for domestic storage furniture |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for structural stability and finish durability | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of formaldehyde emission for wooden furniture |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural stability and finish durability; 2. GB 18584-2001: Indoor decorating and refurbishing materials - limit of formaldehyde emission for wooden furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp
