| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 450 x 450 x 650 mm | |
|---|---|---|
| Tabletop diameter | 450 mm | |
| Tabletop thickness | 12 mm | |
| Central support leg diameter | 30 mm | |
| Three-prong base spread diameter | 420 mm | |
| Base bar cross-section | 20 x 40 mm | |
| Floor clearance under base | 10 mm | |
| Tabletop edge radius | 6 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Net product weight | 9 kg | |
|---|---|---|
| Static tabletop load capacity | 35 kg | |
| Base lateral stability load | 15 kg | |
| Surface water resistance rating | IPX4 | |
| Finish scratch resistance | 3H | |
| Recommended maximum placeable item diameter | 200 mm | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop substrate | 12mm sintered stone or high-density MDF | |
|---|---|---|
| Tabletop finish | Matte white non-porous coating | |
| Central support leg | Matte black powder-coated carbon steel | |
| Three-prong base bars | 1.5mm thick powder-coated rectangular steel tubing | |
| Base foot pads | Injection-molded polyethylene glides | |
| Assembly hardware | Zinc-plated steel hex bolts and lock washers | |
| Joint connection plate | 3mm thick stamped steel bracket | |
| Anti-slip pad under tabletop connection | EVA foam gasket | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Assembly requirement | Knock-down assembly with included hex key | |
|---|---|---|
| Surface utility | Flat level top supports drinks, small decor and table lamps | |
| Floor protection | Replaceable plastic glides on each base prong end | |
| Placement flexibility | Three-prong low-profile base fits under sofa overhangs | |
| Cleaning function | Non-porous smooth top wipes clean with dry or damp cloth | |
| Tip resistance design | Radial three-point base distributes weight evenly across floor | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Living room sofa side placement | Position next to upholstered sofas or armchairs for drinks and small decor | |
|---|---|---|
| Bedroom nightstand use | Serve as compact bedside table for lamps, phones and reading materials | |
| Balcony accent table use | Place on covered balconies to hold potted plants or tea sets | |
| Hotel lounge furnishing | Use in hotel lobby seating areas for guest convenience | |
| Office reception side placement | Position next to reception lounge seating for visitor refreshments | |
| Small apartment flexible furnishing | Suitable for micro-apartments and studio units with limited floor space |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Safety, strength and durability requirements for domestic tables | |
|---|---|---|
| EN 15187:2006 | Assessment of surface resistance to cold liquids for furniture |
US and Canada office-furniture standards
| ANSI/BIFMA X5.5-2021 | Performance standard for occasional tables, applicable for load and stability testing |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to tabletops | |
|---|---|---|
| GB/T 4893.9-2013 | Surface scratch resistance test method for furniture finishes | |
| GB 28007-2011 | Stability and mechanical safety requirements for household furniture |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to tabletops; 2. GB/T 4893.9-2013: Surface scratch resistance test method for furniture finishes; 3. GB 28007-2011: Stability and mechanical safety requirements for household furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
