Product supplierTwo-Piece Cream Rounded Rectangular and Taupe Round Nesting Coffee Table Set, 18 mm engineered-wood board with painted MDF edge banding
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 990 × 560 × 457 mm | |
|---|---|---|
| Large tabletop usable area | 910 x 480 mm | |
| Large tabletop thickness | 80 mm | |
| Large base width | 520 mm | |
| Large base floor contact | 140 x 260 mm per support | |
| Large under-table clearance | 250 mm | |
| Large rounded corner radius | 90 mm | |
| Small tray rim height | 20 mm | |
| Small pedestal diameter | 220 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Large table distributed top load | 50 kg | |
|---|---|---|
| Small table distributed top load | 30 kg | |
| Concentrated load test point | 20 kg at 100 mm diameter | |
| Static floor stability | No tipping under a 15 kg off-center edge load | |
| Finish heat-ring resistance | 60 degrees C cup contact for 10 minutes | |
| Drawer or moving-part durability | Not applicable; fixed non-mechanical tables | |
| Floor-protection rating | Quiet non-marking contact under 80 kg total set load | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Large tabletop substrate | 18 mm engineered-wood board with painted MDF edge banding | |
|---|---|---|
| Large top surface finish | Cream matte polyurethane paint over sealed board substrate | |
| Large soft-edge construction | Rounded MDF edge profile bonded and painted continuously with the top | |
| Large support structure | Taupe painted engineered-wood or mineral-composite twin supports with concealed top brackets | |
| Large floor-contact pads | Two 140 x 260 mm non-woven fabric pads over rigid support feet | |
| Small tabletop substrate | 18 mm engineered-wood circular panel with molded MDF tray rim | |
| Small top surface finish | Taupe matte polyurethane paint over moisture-sealed board | |
| Small tray edge | 20 mm painted MDF retaining lip bonded to the circular panel | |
| Small pedestal column | 220 mm diameter painted MDF or composite cylinder with internal blocking | |
| Small base flange | 300 mm diameter weighted composite floor flange fixed to the column | |
| Joinery hardware | Four M8 x 50 mm inserted bolts and captive steel corner plates per table | |
| Board moisture content | 10 percent at factory acceptance |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Nesting placement | Small table slides partially over the large table footprint to form a 990 x 760 mm group | |
|---|---|---|
| Independent use | Each table separates for use as a 406 mm coffee table or 457 mm side table | |
| Tray containment | Small table has a 20 mm raised rim reducing slide-off of cups, books and remote controls | |
| Static level adjustment | Four threaded or pad-style levelers compensate up to 8 mm floor variation | |
| Floor protection | Non-marking pads at every support foot allow repositioning without exposed hard edges | |
| Tool-assisted assembly | Pedestal or supports attach to tops using eight M8 bolts with one included hex key | |
| Cable and power function | Not provided; no powered mechanism, grommet or cable route is visible | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Compact living room | Place the nested pair before a 2400 mm sofa to save circulation space while retaining two serving surfaces. | |
|---|---|---|
| Open-concept lounge | Separate the 457 mm round table beside an armchair and keep the 406 mm rectangular table in the seating center. | |
| Neutral cream interior | Use the cream and taupe matte finishes in beige, warm-white or wood-tone rooms needing low-visual-weight furniture. | |
| Home entertaining | Use the tray-rim table for cups and desserts while books or a serving tray remain on the larger rectangular top. | |
| Apartment or rental staging | Specify the lightweight knockdown set for show flats because it nests for moving and requires no wall attachment. | |
| Hotel guest room seating area | Configure both tables around a sofa or lounge chair for beverages, reading material and guest accessories. | |
| Quiet home office break zone | Place beside a lounge seat for informal reading or coffee breaks without adding storage drawers or cable outlets. |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 12521 | 2015: recommended European strength, durability and safety reference for residential tables; use only as an acceptance criterion. |
|---|
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
No standards data is available for this market.
Standardized tender description text
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool