| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Finished Top Thickness | 45 mm | |
|---|---|---|
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Set net weight | 24 kg | |
|---|---|---|
| Large tabletop distributed load | 40 kg | |
| Small tabletop distributed load | 30 kg | |
| Individual frame vertical static load | 70 kg | |
| Floor adjustment per glide | 5 mm | |
| Recommended service occupancy | 2 adults | |
| Surface localized impact acceptance target | 1 kg steel ball dropped from 100 mm | |
| Metal frame salt-spray acceptance target | 48 h | |
| Warranty target | 24 months | |
| Top Static Load Reference | 150 kg uniformly distributed |
Core acceptance fields · Panels / hardware / frame / upholstery
| Large tabletop | White marble-veined sintered-stone-look panel with smooth polished face | |
|---|---|---|
| Small tabletop | Black marble-look sintered-stone-look panel with subtle light veins | |
| Top edge banding | Black rigid edge rim around both circular tops | |
| Support frame | Black powder-coated carbon-steel square tube | |
| Base ring | Continuous circular welded steel tube with closed perimeter | |
| Upright supports | Two vertical steel posts per table linking ring base to top frame | |
| Underside support plate | Steel circular sub-frame concealed below each tabletop | |
| Foot protection | Black non-marking polymer glides at frame contact points | |
| Surface finish, tops | Smooth low-porosity glossy finish suitable for wipe cleaning | |
| Surface finish, frame | Matte black powder coating with uniform welded joints | |
| Joint construction | Welded ring and post joints with concealed top fasteners | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up |
Adjustment / rotation / tilt / mobility / storage features
| Nesting operation | Small table slides beneath the large table through the open C-shaped side frame | |
|---|---|---|
| Independent use | Each table has its own ring base and can be separated as a standalone occasional table | |
| Staggered display layout | Tables can be offset to create a two-level serving surface with 100 mm height difference | |
| Compact storage | Pushing the small table inward reduces occupied footprint to 800 x 650 mm | |
| Leveling | Screw-type glides provide 5 mm floor-height correction on uneven indoor surfaces | |
| Floor protection | Polymer glides isolate the steel base from tile, wood or laminate flooring | |
| Cleaning access | Smooth sealed tops and open metal bases permit wiping without removable cushions or panels | |
| Serving use | Large top accepts trays and drinkware while the small top supports books, remote controls or decor | |
| Anti-tip geometry | Circular base rings extend under the tabletops to lower tipping risk under off-center loads | |
| Assembly method | Tabletops attach to pre-welded base frames with concealed screws or brackets | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Living room center table | Place in front of a three-seat sofa for cups, books, remote controls and decorative objects | |
|---|---|---|
| Compact apartment lounge | Use the nested layout to reduce occupied floor space when only one serving surface is needed | |
| Reception waiting area | Separate the tables beside lounge seating to distribute drinks and reading material across guests | |
| Hotel or showroom lounge | Use the black-and-white marble-look pair as a coordinated display set for contemporary interiors | |
| Home office relaxation corner | Use beside an armchair for a laptop, notebook and beverage during short breaks | |
| Balcony tea corner | Suitable for covered indoor-balcony use with protected metal frame and wipe-clean hard tops | |
| Staging and rental furniture | Two lightweight visual levels support event styling while nesting simplifies transport between setups |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Safety, strength and durability requirements for domestic tables, applicable to nesting coffee table acceptance | |
|---|---|---|
| EN 1730:2000 | Test methods for table strength, durability and stability, applicable to static load and stability verification |
Standards applicable to China-market projects
| GB/T 3324-2024 | General technical requirements for wooden furniture, applicable if the stone-look panel uses a wood-based substrate | |
|---|---|---|
| GB/T 3325-2017 | Metal furniture technical requirements, applicable to the steel frame strength, coating and joint quality | |
| GB/T 10357.6-2013 | Furniture mechanical surface test methods, applicable to tabletop static load and durability acceptance | |
| GB 18584-2001 | Indoor decorative materials limit for formaldehyde emission, applicable to wood-based substrate or backing board | |
| GB/T 4893.8-2013 | Furniture surface wear test method, applicable to coated metal and decorative panel finishes |
This product must meet the following technical requirements: 1. GB/T 3324-2024: General technical requirements for wooden furniture, applicable if the stone-look panel uses a wood-based substrate; 2. GB/T 3325-2017: Metal furniture technical requirements, applicable to the steel frame strength, coating and joint quality; 3. GB/T 10357.6-2013: Furniture mechanical surface test methods, applicable to tabletop static load and durability acceptance; 4. GB 18584-2001: Indoor decorative materials limit for formaldehyde emission, applicable to wood-based substrate or backing board; 5. GB/T 4893.8-2013: Furniture surface wear test method, applicable to coated metal and decorative panel finishes; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
