| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Side Rail Thickness | 40 mm | |
|---|---|---|
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Large table distributed top load | 40 kg | |
|---|---|---|
| Small table distributed top load | 30 kg | |
| Large table net weight | 28 kg | |
| Recommended display objects per table | 8 items | |
| Floor contact area per base | 730 cm2 for large table, 450 cm2 for small table | |
| Surface stability class | Stationary indoor use on level hard flooring | |
| Color options visible | 2 body finishes | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg | |
| Recommended Procurement Warranty | Frame 10 years; hardware 5 years; upholstery 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Large table body | Ivory-finish molded composite or resin shell with continuous vertical fluting | |
|---|---|---|
| Small table body | Charcoal-finish molded composite or resin shell with continuous vertical fluting | |
| Large table top | Light gray engineered stone-look panel with subtle gray veining | |
| Small table top | Dark gray engineered stone-look panel with subtle gray veining | |
| Edge rim | Rounded raised rim formed with the same fluted body shell | |
| Large base | Brass-tone circular metal plinth with a flat satin finish | |
| Small base | Brass-tone circular metal plinth matching the large table | |
| Internal support structure | Closed drum support beneath each top, with no visible legs or open shelf | |
| Bottom protection | Supplied or recommended 2 mm felt or EVA pads under each metal plinth | |
| Flute surface coating | Smooth painted or pigmented coating over ribbed substrate, 0.8 mm visible coating-relief depth | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner |
Adjustment / rotation / tilt / mobility / storage features
| Two-table arrangement | Large low table and smaller taller table function as a coordinated cocktail-and-side set | |
|---|---|---|
| Serving surface use | Inset circular tops provide stable zones for cups, books, trays, lamps, and decorative objects | |
| Placement flexibility | The independent bases allow side-by-side, offset, separated, or sofa-flanking layouts | |
| Storage configuration | The exteriors are solid drum enclosures with no visible drawer, door, shelf, or lift-top hardware | |
| Floor protection function | Continuous circular plinths spread load and should be fitted with non-marking pads for hard floors | |
| Cleaning access | Vertical flutes require brush or vacuum cleaning along 12 mm rib spacing, while tops wipe clean separately | |
| Mobility function | No casters, handles, or folding parts are present; tables are relocated by lifting | |
| Leveling method | Tables bear on fixed circular plinths and require a level floor or separate adhesive floor protectors | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Contemporary living room | Place the large table in front of a two-seat or three-seat sofa and the small table beside an armchair | |
|---|---|---|
| Hotel lounge | Use pairs between modular seating zones for drinks, reading material, and ambient objects | |
| Reception waiting area | Configure around visitor seating to create a polished hospitality focal point | |
| Model home staging | Use the contrasting ivory and charcoal finishes to add sculptural forms without visible legs | |
| Residential lounge or apartment | Separate the pieces around sectional seating or combine them loosely as a nested two-level set |
EU Market Access Requirements* EN Standards
| Houseware table safety, stability, and strength | Recommended references: EN 12521 | |
|---|---|---|
| Formaldehyde emission from wood-based panels | EN 13986 applies if engineered wood panel substrates are used in the drum body | |
| Furniture surface cold-liquid resistance | EN 12720 applies to the horizontal top finish for liquid-resistance acceptance | |
| Furniture surface abrasion resistance | EN 12721 applies if the top uses a coated decorative surface |
US and Canada office-furniture standards
| Occasional table structural suitability | ANSI/BIFMA X5.5 provides static-load, stability, and durability test methods suitable for horizontal-surface products | |
|---|---|---|
| Floor-protection review | ANSI/BIFMA X5.5 stability testing should be performed with the specified non-marking plinth pads |
Standards applicable to China-market projects
| Furniture dimensional coordination | GB/T 3326 applies to physical dimension verification of table height, diameter, and clearance | |
|---|---|---|
| Furniture performance test for tables | GB/T 10357.5 applies to table static-load and stability verification | |
| Wood-based panel formaldehyde emission | GB 18580 applies if the concealed substrate uses wood-based panels | |
| Furniture surface cold-liquid resistance | GB/T 4893.5 applies to painted or laminated horizontal surfaces |
This product must meet the following technical requirements: 1. Furniture dimensional coordination: GB/T 3326 applies to physical dimension verification of table height, diameter, and clearance; 2. Furniture performance test for tables: GB/T 10357.5 applies to table static-load and stability verification; 3. Wood-based panel formaldehyde emission: GB 18580 applies if the concealed substrate uses wood-based panels; 4. Furniture surface cold-liquid resistance: GB/T 4893.5 applies to painted or laminated horizontal surfaces; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
