Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	1200 × 700 × 450 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Net weight	68 kg
Lift-top static load	30 kg
Main tabletop distributed load	60 kg
Drawer load per unit	8 kg
Pull-out tray load	10 kg
Enclosed cabinet storage volume	0.08 m3
Recommended users	4 people
Slide durability	30000 open-close cycles
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Black main top	Gloss black marble-look hard surface with white veining and rounded edges
Rear top	Gloss white stone-look panel with a black edge band
Outer case	Walnut-tone wood-grain engineered-wood panels, 18 mm thickness
Drawer fronts	Matched walnut-tone wood-grain panels with flush reveal detailing
Lower plinth	Black recessed base panel creating a floating low-profile appearance
Interior panels	Light gray or taupe engineered-wood interiors in the open drawer
Drawer slides	Side-mounted metal telescopic slides with full or three-quarter extension
Lift mechanism	Concealed metal lift arms with friction or spring-assisted positioning
Door hinge	Concealed side-mounted cabinet hinge attached to the left vertical door
Edge treatment	Black PVC or laminated edge banding around the top panels
Surface protection	Smooth high-gloss coating or laminated wear layer on both visible tops
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Lift-top work mode	The rear top rises 170 mm to a 620 mm working height for laptop use, writing, or dining from a sofa
Two-level surface layout	The lower black surface remains at 450 mm while the rear white surface provides a separate raised display or serving zone
Front drawer storage	One side-opening drawer provides 520 x 420 x 130 mm storage for books, magazines, and media accessories
Right pull-out tray	A shallow right tray extends from the case and can hold a keyboard, documents, laptop, or serving items
Left hinged cabinet	The vertical left door opens to an enclosed compartment for larger objects and concealed daily storage
Independent access	The drawer, side tray, and door operate separately without requiring the lift top to be moved
Rounded-edge safety	The main tabletop uses softened 60 mm-radius corners to reduce impact risk at seating height
Floor placement	The recessed plinth supports the case directly on the floor without casters or wall attachment
Cable-use potential	The raised platform can support a laptop while leaving the lower top free; no cable port is visible in the image
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Living room center table	Place in front of a 3-seat sofa for drinks, books, decor, and laptop use in apartments or family rooms
Compact multifunctional room	Use in studio apartments where the raised top substitutes for a temporary dining or work surface
Office lounge	Suitable for staff breakout areas requiring concealed storage and a raised surface for notebooks or refreshments
Reception waiting area	Use in a modern reception lounge to hold magazines, remote controls, and decorative items out of sight
Home media area	Position before a media wall while using the trays for remote controls, game accessories, and snacks
Recommended surrounding clearance	Maintain 700 mm of circulation space on drawer sides for safe full-extension access

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

Safety and stability	EN 12521:2015 safety, strength, and durability requirements are recommended for domestic storage tables
Surface performance	EN 12720:2013 is recommended for resistance to cold liquids on the glossy table surfaces

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

Dimensional and structural review	GB/T 3324:2017 general technical requirements for wooden furniture are recommended for case goods dimensions, workmanship, and stability
Surface durability test	GB/T 4893.4:2013 is recommended for adhesion testing of film-covered wooden furniture surfaces
Formaldehyde control	GB 18580:2017 is recommended for formaldehyde emission limits of engineered-wood components

Standardized tender description text

This product must meet the following technical requirements:
1. Dimensional and structural review: GB/T 3324:2017 general technical requirements for wooden furniture are recommended for case goods dimensions, workmanship, and stability;
2. Surface durability test: GB/T 4893.4:2013 is recommended for adhesion testing of film-covered wooden furniture surfaces;
3. Formaldehyde control: GB 18580:2017 is recommended for formaldehyde emission limits of engineered-wood components;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · CT-LIFT-MARBLE-1200-RECT

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · CT-LIFT-MARBLE-1200-RECT

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · CT-LIFT-MARBLE-1200-RECTOpen Export Tool

Quick Actions

Post an RFQ

Product Description

This unbranded rectangular lift-top coffee table, model CT-LIFT-MARBLE-1200-RECT, presents a modern low-profile form with two distinct surface levels. Its primary black top has a glossy marble-look hard surface with white veining and rounded edges, while the rear section uses a glossy white stone-look panel with a black edge band. The walnut-tone wood-grain engineered-wood case is paired with a recessed black plinth, giving the piece a floating appearance. Flush-reveal drawer fronts, a vertical left cabinet door, and coordinated light gray or taupe open-drawer interiors contribute to a clean, structured look suited to contemporary living and lounge settings. Construction centers on 18 mm walnut-tone engineered-wood panels, a 45 mm finished top thickness, and an 80 mm main support section with a 2 mm metal wall. Side-mounted metal telescopic drawer slides offer full or three-quarter extension, while the lift action uses concealed metal arms with friction or spring-assisted positioning. The left cabinet door operates on a concealed side-mounted hinge. The table weighs 68 kg net and is supplied as one set in two cartons, with packaged gross weight of 90 kg, packaging dimensions of 2100 by 1100 by 300 mm, and packaging volume of 0.55 cubic meters. Reference assembly time is 40 minutes per set. Functionally, the rear white top rises 170 mm to a 620 mm working height for laptop use, writing, or dining from a sofa. The lower black surface remains at 450 mm for drinks, decor, or serving. Each main seating position has 680 mm of knee height and 900 mm of knee width, and the layout is recommended for four people. The front side-opening drawer provides 520 by 420 by 130 mm of space for books, magazines, and media accessories. A shallow right pull-out tray supports a keyboard, documents, laptop, or serving items, while the left hinged door opens to an enclosed cabinet with 0.08 cubic meter of storage. All three storage access points operate independently. An 80 mm cable opening with a 120 mm-deep tray helps manage cords when the raised top is used for work. The main top’s softened 60 mm-radius corners reduce impact risk near seating. Load capacities are 30 kg static on the lift top, 60 kg distributed on the main tabletop, 10 kg on the pull-out tray, and 8 kg per drawer. The table is suitable in front of a three-seat sofa in apartments or family rooms, in studio rooms where the raised surface serves as a temporary dining or work area, in office breakout spaces, reception lounges, and home media areas. Procurement planning should allow 700 mm of clearance on drawer sides for safe full-extension access and confirm site access, two-carton receiving, assembly time, and the 90 kg packaged weight before installation.

Multifunctional Lift-Top Storage Coffee Table with Marble-Look Tops Specifications

Suppliers and stock