| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall desk dimensions | 600 x 450 x 760 mm | |
|---|---|---|
| Overall chair dimensions | 440 x 425 x 820 mm | |
| Desk worktop thickness | 30 mm | |
| Desk under-shelf clearance | 180 mm | |
| Seat height from floor | 460 mm | |
| Seat panel dimensions | 380 x 380 mm | |
| Backrest dimensions | 380 x 220 mm | |
| Seated knee clearance under desk | 580 mm | |
| Steel frame tube wall thickness | 1.5 mm | |
| Steel tube outer dimension | 25 x 50 mm | |
| Foot cap diameter | 30 mm | |
| Edge trim thickness | 2 mm | |
| Desk cross-brace height from floor | 120 mm | |
| Chair leg spread width | 420 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm |
Net weight / load capacity / users / durability
| Total set net weight | 15 kg | |
|---|---|---|
| Desk worktop static load capacity | 100 kg | |
| Recommended user age range | 16 years | |
| Frame corrosion resistance | 240 hours neutral salt spray | |
| Surface pencil hardness | H | |
| Coating adhesion grade | 2 | |
| Structural warranty period | 5 years | |
| Seam fastener spacing | 100 mm | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
| Desk worktop | 30mm E1 grade melamine laminated MDF with yellow wear-resistant surface | |
|---|---|---|
| Seat and backrest panels | 18mm E1 grade melamine laminated MDF with matching yellow surface | |
| Edge trim | 2mm red PVC impact-resistant edge banding on all exposed panel edges | |
| Structural frame | 1.5mm wall thickness oval steel tube with light gray powder coating | |
| Undershelf storage panel | 0.8mm cold-rolled steel sheet with matching light gray powder coating | |
| Frame bracing | 1.2mm wall thickness round steel cross tubes welded to leg frames | |
| Foot caps | 30mm black anti-slip rubber end caps fitted to all leg bottoms | |
| Fasteners | Zinc-plated steel hex bolts and lock nuts for KD assembly | |
| Surface treatment | Pickling, phosphating and electrostatic powder coating on all steel parts | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm |
Adjustment / rotation / tilt / mobility / storage features
| Open under-desk storage shelf | Fixed full-width metal shelf for storing books, stationery and school bags | |
|---|---|---|
| Cantilever chair design | Armless welded steel frame allows stacking 5 chairs high for storage | |
| Fixed height positioning | Non-adjustable welded/bonded frame with fixed work and seat heights | |
| Rounded safety edges | All panel corners rounded with PVC trim to prevent impact injury | |
| Anti-slip floor protection | Rubber foot caps prevent scratching floors and reduce movement during use | |
| Knock-down assembly | Bolted assembly with pre-drilled frames and panels for on-site installation | |
| Central knee bay access | Open front under-desk space allows unobstructed leg entry and exit | |
| Stackable chair storage | Uniform chair frame profile allows vertical stacking to save classroom storage space | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| K-12 classroom use | Fixed height set suitable for middle school general classroom daily study and writing use | |
|---|---|---|
| Training room deployment | Durable steel frame suitable for institutional training centers and tutorial schools | |
| Dormitory study space | Compact footprint fits individual student dormitory study areas with open book storage | |
| After-school program facilities | Scratch-resistant laminate surfaces hold up to high-frequency daily use by students | |
| Exam hall configuration | Stackable chairs and uniform dimensions enable fast room setup for standardized testing | |
| Rental education furniture | Heavy-duty construction and replaceable panels suitable for short-term and long-term education rental fleets | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| EN 1729-1:2015 | Furniture for educational institutions - Part 1: Functional dimensions | |
|---|---|---|
| EN 1729-2:2012 | Furniture for educational institutions - Part 2: Safety requirements and test methods |
Standards applicable to China-market projects
| GB/T 3325-2017 | Metal furniture general technical requirements | |
|---|---|---|
| GB/T 3976-2014 | Functional sizes and technical requirements for school desks and chairs | |
| GB 18580-2017 | Formaldehyde emission limits for wood-based panel products | |
| GB/T 10357.1-2013 | Furniture mechanical performance test for tables |
This product must meet the following technical requirements: 1. GB/T 3325-2017: Metal furniture general technical requirements; 2. GB/T 3976-2014: Functional sizes and technical requirements for school desks and chairs; 3. GB 18580-2017: Formaldehyde emission limits for wood-based panel products; 4. GB/T 10357.1-2013: Furniture mechanical performance test for tables; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
