| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| 3-seat sofa overall dimensions | 2680 x 920 x 880 mm | |
|---|---|---|
| 2-seat loveseat overall dimensions | 2160 x 920 x 880 mm | |
| 1-seat armchair overall dimensions | 1420 x 920 x 880 mm | |
| Rectangular coffee table dimensions | 1400 x 800 x 450 mm | |
| Square end table dimensions | 600 x 600 x 550 mm | |
| Low storage bench dimensions | 1800 x 450 x 400 mm | |
| Seat height from floor | 420 mm | |
| Seat depth (cushion front to back) | 650 mm | |
| Backrest height above seat | 460 mm | |
| Solid wood armrest width | 120 mm | |
| Coffee table lower shelf clearance | 220 mm | |
| Under-sofa leg clearance | 120 mm | |
| Seat Cushion Thickness | 180 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Per-seat static load capacity | 150 kg | |
|---|---|---|
| Cushion foam density | 45 kg/m³ | |
| Cushion foam rebound rate | 60% | |
| Fabric Martindale abrasion resistance | 20000 cycles | |
| Total set net weight (all pieces) | 280 kg | |
| Structural frame warranty | 10 years | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm | |
| Per-seat Load Reference | 130 kg/seat | |
| Upholstery Seam Pitch | 4 mm |
Core acceptance fields · Panels / hardware / frame / upholstery
| Sofa primary frame | Solid rubberwood with walnut brown water-based varnish finish | |
|---|---|---|
| Seat and back cushion filling | High-resilience polyurethane foam with 20mm top layer of down blend | |
| Upholstery fabric | 300g/m² grey linen-blend woven fabric | |
| Armrest and side panels | Solid wood slat construction with 15mm thick slats | |
| Table frame and tops | Solid walnut-finish wood with rounded edge profile | |
| Wood surface finish | Non-toxic water-based polyurethane varnish | |
| Cushion support base | 80mm wide sinuous spring support with 50mm webbing layer | |
| Seam stitching | Reinforced polyester thread with 30mm stitch pitch | |
| Table and sofa legs | Solid wood block legs with 60x60mm cross-section | |
| Decorative throw pillows | Matching woven fabric covers with polyfiber filling | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide |
Adjustment / rotation / tilt / mobility / storage features
| Cushion configuration | Loose, reversible seat and back cushions for even wear | |
|---|---|---|
| Coffee table storage | Open lower fixed shelf for magazines and remote controls | |
| Low bench storage | Concealed pull-out drawer storage for living room accessories | |
| Seating layout | Modular conversational arrangement around central coffee table | |
| Surface maintenance | Stain-resistant fabric finish allows spot cleaning with mild detergent | |
| Structural joinery | Reinforced mortise-and-tenon connections for frame stability | |
| Cushion attachment | Non-slip fabric base prevents cushions shifting during use | |
| Table top edge design | 3mm rounded eased edge to reduce impact injury | |
| Assembly requirement | Partial assembly required for table legs and sofa base connections | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
| Residential living room | Primary use for family seating and guest entertainment in open-plan living spaces | |
|---|---|---|
| Large apartment open lounge | Suitable for 45sqm lounge areas with space for full 6-piece arrangement | |
| New Chinese style interior schemes | Complements walnut wood trim, neutral wall colors and minimalist oriental decor | |
| Formal reception lounge | Appropriate for residential guest reception areas requiring sturdy, classic seating | |
| Daily family use | Designed for long-term daily seating with stain-resistant fabric and durable frame | |
| Combined with low-pile area rugs | Works with standard 2x3m or larger area rugs placed centrally under seating layout |
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Furniture – Strength, durability and safety for domestic seating, applicable for sofa performance | |
|---|---|---|
| EN 13759:2003 | Furniture – Test methods for tables, applicable for table stability and load rating |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for frame strength and finish quality | |
|---|---|---|
| GB 18584-2001 | Indoor decoration material limit of harmful substances for wooden furniture, applicable for formaldehyde emission | |
| GB/T 1952.1-2012 | Upholstered furniture sofa, applicable for seating durability and safety requirements |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for frame strength and finish quality; 2. GB 18584-2001: Indoor decoration material limit of harmful substances for wooden furniture, applicable for formaldehyde emission; 3. GB/T 1952.1-2012: Upholstered furniture sofa, applicable for seating durability and safety requirements; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
