Traditional Red-Brown Wood Veneer Boat-Shaped Boardroom Conference Table with Central Cable Management (model CNF-BOAT-4800-RD-VNR) is listed under Traditional Conference Table, with overall dimensions of 4800 × 1600 × 760 mm and main material of MDF. Load capacity: 227 kg. Certifications: Traditional,formal,style,panel,enclosed,base,integrated,cable,management,multi-seat,boardroom,design. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions | 4800 x 1600 x 760 mm | |
|---|---|---|
| Tabletop thickness | 38 mm | |
| Solid wood edge trim thickness | 8 mm | |
| Central cable channel width | 200 mm | |
| Knee clearance height under table | 670 mm | |
| Base plinth height | 80 mm | |
| End bevel taper depth at narrow ends | 1200 mm | |
| Perimeter molding step count | 3 | |
| Cable access grommet spacing | 600 mm | |
| Corner overhang beyond base | 150 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Maximum static distributed tabletop load | 227 kg | |
|---|---|---|
| Seating capacity | 12 people | |
| Paint surface hardness | 2H | |
| Wood substrate moisture content | 12% | |
| Recommended tabletop concentrated load at center | 90 kg | |
| Formaldehyde emission limit | 0.05 mg/m³ | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop substrate | High-density MDF core, 0.70 g/cm³ density | |
|---|---|---|
| Surface finish | 0.6 mm thick natural wood veneer with multi-coat gloss lacquer | |
| Edge treatment | Solid hardwood trim with molded beveled profile | |
| Base structure | Enclosed wood panel base with decorative raised panel molding | |
| Central cable channel | White recessed metal trough with removable access covers | |
| Leveling feet | Nylon adjustable anti-slip glides at base corners |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Cable management system | Full-length recessed central trough with concealed routing to floor pass-through | |
|---|---|---|
| Power/data integration | Dual end-mounted multimedia cubbies supporting AC, USB, HDMI, and Ethernet connections | |
| Base access panels | Removable side panels on base for cable routing and service access | |
| Surface protection | Stain, scratch, and heat-resistant lacquer finish suitable for daily boardroom use |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Corporate boardrooms | Suitable for executive meetings and presentations for up to 12 participants | |
|---|---|---|
| Formal government meeting rooms | Matches traditional red-brown wood finish required for official office settings |
EU Market Access Requirements* EN Standards
| EN 527-3:2003 | Office tables - test methods for stability and structural strength | |
|---|---|---|
| EN 13722:2004 | Furniture - strength and durability requirements for office storage and tables |
US and Canada office-furniture standards
| ANSI/BIFMA X5.5-2021 | Standard for desk products, covering static load, durability and stability for office tables |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to structural and finish performance | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of harmful substances in wood furniture | |
| GB/T 4893.4-2013 | Test method for surface adhesion of furniture paint film |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to structural and finish performance; 2. GB 18584-2001: Indoor decorating and refurbishing materials - limit of harmful substances in wood furniture; 3. GB/T 4893.4-2013: Test method for surface adhesion of furniture paint film; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp