Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 1800 × 420 × 2000 mm | |
|---|---|---|
| Upper left solid door height | 1240 mm | |
| Left lower drawer unit height | 700 mm | |
| Arched glass door section height | 1240 mm | |
| Lower solid door height | 700 mm | |
| Interior shelf depth in glass sections | 380 mm | |
| Shelf spacing in glass display sections | 380 mm | |
| Base plinth height | 60 mm | |
| Crown molding top trim height | 40 mm | |
| Door panel thickness | 25 mm | |
| Carcass side panel thickness | 18 mm | |
| Clear tempered glass thickness for display doors | 5 mm | |
| Drawer internal depth | 360 mm | |
| Adjustable shelf count per glass compartment | 3 | |
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Unit net weight | 92 kg | |
|---|---|---|
| Single shelf static load capacity | 25 kg | |
| Total static storage capacity | 300 kg | |
| Hinge open-close cycle rating | 80000 cycles | |
| Drawer slide cycle rating | 50000 cycles | |
| Wall anti-tip anchor load rating | 50 kg | |
| Recommended maximum weight for top surface | 30 kg | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles |
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Carcass and frame | E1 grade engineered wood with 0.4mm red-brown wood veneer, matte scratch-resistant lacquer finish | |
|---|---|---|
| Display door panels | 5mm clear tempered glass with arched wood frame trim | |
| Solid door panels | 25mm thick solid wood composite with raised arched edge molding | |
| Hardware (locks, hinges) | Antique brass finished steel keyed locks, concealed steel hinges | |
| Drawer slides | Side-mounted cold-rolled steel ball-bearing slides | |
| Shelf surfaces | 18mm thick veneered engineered wood with PVC edge banding |
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Lockable storage | Keyed locks on lower right solid door and upper left solid door, includes 2 matching keys | |
|---|---|---|
| Adjustable shelving | Shelves in glass display sections adjust in 32mm increments for flexible storage height | |
| Drawer storage | 2 integrated drawers in lower left section for small office supply and document storage | |
| Anti-tip safety | Included wall anchor hardware secures cabinet to wall to prevent forward tipping |
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive office space | Fits behind or adjacent to executive desks for document storage and decorative display | |
|---|---|---|
| Manager office or meeting room | Provides locked secure storage for confidential documents and display space for awards or decor |
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Domestic and kitchen storage units and worktops - safety requirements and test methods, applicable for structural stability testing | |
|---|---|---|
| EN 12521:2015 | Furniture - strength, durability and safety - requirements for non-domestic storage furniture, applicable for commercial office use | |
| EN 71-3:2019 | Migration of certain elements, required for surface coating safety in indoor furniture |
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| ANSI/BIFMA X5.9-2019 | Storage Units - Tests for durability, strength, and stability, applicable for commercial office storage performance validation |
|---|
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional and structural quality inspection | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of formaldehyde emission in wooden furniture, required for indoor office use | |
| GB/T 4893.8-2013 | Test method for surface wear resistance of furniture finishes, applicable for lacquer surface durability validation |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for dimensional and structural quality inspection; 2. GB 18584-2001: Indoor decorating and refurbishing materials - limit of formaldehyde emission in wooden furniture, required for indoor office use; 3. GB/T 4893.8-2013: Test method for surface wear resistance of furniture finishes, applicable for lacquer surface durability validation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool