Mahogany Finish Executive Office Side Credenza with Open Shelves and Drawer (model OFC-CRD-1830MH) is listed under Traditional Office Sideboard, with overall dimensions of 1830 × 610 × 770 mm and main material of MDF. Load capacity: 50 kg. Certifications: Traditional,executive,style,closed,door,storage,open,shelf,drawer. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions | 1830 x 610 x 770 mm | |
|---|---|---|
| Top panel thickness | 29 mm | |
| Side panel thickness | 18 mm | |
| Back panel thickness | 9 mm | |
| Left cabinet door dimensions | 520 x 600 mm | |
| Right cabinet door dimensions | 520 x 600 mm | |
| Center open compartment width | 580 mm | |
| Upper open shelf internal height | 200 mm | |
| Lower open shelf internal height | 210 mm | |
| Center drawer dimensions | 480 x 120 x 450 mm | |
| Raised top lip height | 30 mm | |
| Plinth base height | 60 mm | |
| Reeded side panel trim width | 60 mm | |
| Adjustable shelf pin spacing | 32 mm | |
| Door clearance swing radius | 500 mm | |
| Carcass Panel Thickness | 25 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Top surface static load capacity | 50 kg | |
|---|---|---|
| Drawer slide cycle rating | 50000 cycles | |
| Door hinge cycle rating | 80000 cycles | |
| Net weight reference | 75 kg | |
| Anti-tip securement rating | 22 kg | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Carcass construction | 18mm E1 grade engineered wood core | |
|---|---|---|
| Exterior finish | Mahogany wood veneer with satin lacquer topcoat | |
| Hardware pulls | Chrome-plated zinc alloy bar handles | |
| Drawer slides | Cold-rolled steel ball-bearing full-extension slides | |
| Door hinges | Cold-rolled steel concealed 110-degree opening hinges | |
| Edge banding | 0.8mm thick matching mahogany PVC edge banding |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Storage configuration | Two closed side cabinets, two-tier central open shelf, single center lower drawer | |
|---|---|---|
| Door operation | Hinged side doors open 110 degrees for full interior access | |
| Drawer operation | Full-extension drawer slides allow complete access to drawer contents | |
| Leveling adjustment | Four adjustable floor glides compensate for uneven office flooring |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Primary placement | Positioned against office walls adjacent to executive desks | |
|---|---|---|
| Storage use case | Stores office documents, supplies, and small equipment with mixed open/closed access |
EU Market Access Requirements* EN Standards
| EN 14073-2:2004 | Office storage furniture safety requirements, applicable for structural safety checks | |
|---|---|---|
| EN 14073-3:2004 | Office storage furniture stability and strength requirements, applicable for load testing |
US and Canada office-furniture standards
| ANSI/BIFMA X5.9-2019 | Office storage units performance standard, applicable for commercial durability verification |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for quality acceptance | |
|---|---|---|
| GB 18580-2017 | Formaldehyde emission limits for wood-based panels, applicable for E1 grade compliance | |
| GB/T 4897.3-2003 | Particleboard for furniture use, applicable for core material performance |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for quality acceptance; 2. GB 18580-2017: Formaldehyde emission limits for wood-based panels, applicable for E1 grade compliance; 3. GB/T 4897.3-2003: Particleboard for furniture use, applicable for core material performance; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp