| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall external dimensions | 800 x 400 x 850 mm | |
|---|---|---|
| Raised back gallery splash height | 80 mm | |
| Upper glass door compartment clear opening height | 380 mm | |
| Upper compartment clear opening width per door | 360 mm | |
| Adjustable interior shelf thickness (per compartment) | 15 mm | |
| Lower drawer face height per drawer | 180 mm | |
| Lower drawer internal usable depth | 360 mm | |
| Cabinet carcass side panel thickness | 18 mm | |
| Back panel thickness | 16 mm | |
| Solid wood edge banding thickness | 6 mm | |
| Tempered glass door panel thickness | 5 mm | |
| Round hardware knob diameter | 50 mm | |
| Plinth base height | 60 mm | |
| Carcass Panel Thickness | 25 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Top surface uniform static load capacity | 50 kg | |
|---|---|---|
| Adjustable interior shelf uniform static load | 15 kg | |
| Lower drawer maximum static load per drawer | 10 kg | |
| Total cabinet net weight | 45 kg | |
| Formaldehyde emission rating (substrate) | 0.05 mg/m³ | |
| Paint surface pencil hardness | 2H | |
| Solid wood component moisture content | 12% | |
| Drawer slide open/close cycle durability | 50000 cycles | |
| Door hinge open/close cycle durability | 80000 cycles | |
| Shelf Distributed Load | 30 kg/shelf |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Cabinet carcass substrate | E1 grade MDF core with wood veneer overlay | |
|---|---|---|
| Upper door panels | Clear tempered glass set in solid wood frames | |
| Hardware knobs | Polished chrome-plated zinc alloy round pulls | |
| Finish coating | Scratch-resistant water-based polyurethane wood finish | |
| Edge trim | Solid wood inlay accent lines across all front panels | |
| Drawer slides and hinges | Cold-rolled steel with anti-rust zinc plating |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Upper storage access | Two hinged arched glass doors with one adjustable shelf per compartment | |
|---|---|---|
| Lower storage access | Two full-depth equal-width drawers for closed accessory storage | |
| Item fall protection | Curved raised gallery edge along back and sides of top surface | |
| Wall stabilization | Pre-drilled anti-tip hardware mounting points on rear carcass |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Office meeting room use | Positioned against wall for tea ware, cup and beverage accessory storage | |
|---|---|---|
| Executive office side storage | Placed adjacent to executive desk for refreshment and document accessory storage |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Domestic and kitchen storage units and worktops - safety and performance requirements | |
|---|---|---|
| EN 12521:2015 | Furniture - strength, durability and safety requirements for domestic tables |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to dimensional and structural acceptance | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of formaldehyde emission for wooden furniture | |
| GB/T 4893.4-2013 | Surface wear resistance test method for furniture coatings, applicable to finish durability |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to dimensional and structural acceptance; 2. GB 18584-2001: Indoor decorating and refurbishing materials - limit of formaldehyde emission for wooden furniture; 3. GB/T 4893.4-2013: Surface wear resistance test method for furniture coatings, applicable to finish durability; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp
