Product supplierTraditional Carved Mahogany Low Media Console with Glass Doors and Drawer, Stained medium-density fiberboard with mahogany wood veneer
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 800 × 460 × 650 mm | |
|---|---|---|
| top overhang width | 30 mm | |
| carved frieze height | 40 mm | |
| upper glass door compartment height | 340 mm | |
| single glass door width | 330 mm | |
| internal shelf height behind doors | 200 mm | |
| lower full-width drawer height | 160 mm | |
| drawer internal usable depth | 400 mm | |
| plinth base height | 70 mm | |
| plinth base projection | 25 mm | |
| glass panel thickness | 5 mm | |
| carcass side panel thickness | 18 mm | |
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| top surface static load capacity | 50 kg | |
|---|---|---|
| product net weight | 35 kg | |
| hinge cycle rating | 50000 open/close cycles | |
| drawer slide cycle rating | 30000 open/close cycles | |
| cable port diameter | 10 mm | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| cabinet carcass | Stained medium-density fiberboard with mahogany wood veneer | |
|---|---|---|
| upper door panels | 5mm clear float glass set in wood frames | |
| hardware pulls | Zinc alloy with brushed silver bail pull finish | |
| top surface | 18mm thick veneered wood with molded ogee edge | |
| decorative frieze | Carved wood composite with repeating key geometric pattern | |
| base plinth | Stained molded wood with stepped chamfered edge |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| upper door storage | Two hinged swing-out glass doors with fixed internal shelf for AV components | |
|---|---|---|
| lower drawer storage | Full-width pull-out drawer with side-mount slides for media accessories | |
| cable management | Recessed AV connectivity ports on right top edge for device wiring | |
| stationary placement | Fixed plinth base without casters for permanent floor positioning |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| living room media placement | Suitable for TV and AV component storage in traditional style residential spaces | |
|---|---|---|
| office side storage | Suitable as under-desk printer stand or side supply cabinet in traditional wood office interiors |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Domestic and kitchen storage units and worktops - safety requirements for domestic use | |
|---|---|---|
| EN 12521:2015 | Furniture - strength, durability and safety for domestic storage furniture |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for structural qualityAcceptance | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of harmful substances in wood furniture |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural qualityAcceptance; 2. GB 18584-2001: Indoor decorating and refurbishing materials - limit of harmful substances in wood furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
