Name: Red-brown Solid Wood Frame Black Padded Fixed-leg Conference Armchair
Brand: LINGKEN
SKU: YRY2CZ

Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	670 × 670 × 1080 mm
Seat height from floor	460 mm
Seat width between arm supports	520 mm
Seat cushion depth	460 mm
Seat cushion thickness	70 mm
Backrest total height from seat	620 mm
Armrest height from floor	650 mm
Armrest width (outer edge to edge)	620 mm
Backrest width at widest point	480 mm
Leg cross-section dimension	50 x 50 mm
Floor clearance under seat front rail	220 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Net product weight	28 kg
Maximum static user load capacity	150 kg
Seat foam density	36 kg/m³
Backrest foam density	30 kg/m³
Foam rebound rate	45%
Foam compression set rate	6%
Recommended maximum continuous seating duration	4 hours
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Main structural frame	Kiln-dried solid hardwood, red-brown lacquer finish
Seat upholstery	1.5 mm thick black top-grain leather/PU covering
Backrest upholstery	1.5 mm thick black segmented upholstery matching seat
Internal seat/back support panel	12 mm thick E0/E1 grade bent plywood
Seat cushion filling	High-resilience cold-cure polyurethane foam
Backrest cushion filling	High-resilience polyurethane foam
Frame surface finish	2H hardness water-based lacquer
Joinery hardware	Reinforced mortise-and-tenon wood joints with steel dowel fasteners
Bottom foot pads	Non-slip rubber floor protection pads
Seam stitching	High-tensile polyester thread, 8 stitches per 30mm pitch
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Seating mechanism type	Fixed-position non-swivel non-tilt seating structure
Armrest function	Curved integrated fixed wood armrests for elbow support
Backrest support design	Segmented horizontally contoured back for lumbar/upper back support
Floor contact function	Fixed four-point contact with rubber pads, no casters
Height adjustment function	No height, tilt, or recline adjustment mechanism present
Assembly configuration	Semi-knockdown construction with pre-fitted upholstered panels
Stacking compatibility	Non-stacking fixed leg structure
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Corporate meeting room seating	Suitable for fixed arrangement around formal conference tables, matches executive meeting aesthetics
Executive visitor and guest seating	Placed in executive offices for guest seating adjacent to desks or side tables
Government and institutional meeting spaces	Suited for hearing rooms, council chambers, and official meeting venues
Training room permanent seating	Used in fixed training room layouts with stationary table setups
Reception area formal seating	Placed in premium reception zones for high-profile visitor waiting
Boardroom permanent installation	Compatible with fixed AV and table installations in dedicated boardrooms
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

Office chair strength and stability	EN 1335:2018 Office furniture - Office work chairs - Safety requirements
Upholstered furniture flammability	EN 1021:2019 Upholstered furniture - Ignitability by smouldering cigarette
Surface finish durability	EN 12720:2013 Furniture - Assessment of surface resistance to cold liquids

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

Office chair mechanical safety	GB/T 3324General technical requirements for wooden furniture
Upholstered furniture durability	GB/T 10357.3Test for strength and durability of chairs and stools
Formaldehyde emission limits	GB 18584Indoor decorating materials: limit of harmful substances in wooden furniture

Standardized tender description text

This product must meet the following technical requirements:
1. Office chair mechanical safety: GB/T 3324General technical requirements for wooden furniture;
2. Upholstered furniture durability: GB/T 10357.3Test for strength and durability of chairs and stools;
3. Formaldehyde emission limits: GB 18584Indoor decorating materials: limit of harmful substances in wooden furniture;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · CF-WOOD-CONF-001

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · CF-WOOD-CONF-001

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · CF-WOOD-CONF-001Open Export Tool

Quick Actions

Post an RFQ

Product Description

The LINGKEN CF-WOOD-CONF-001 Office Conference Armchair presents a formal, refined visual profile anchored by a red-brown solid wood frame paired with black padded upholstery, structured as a high-back fixed-leg armchair with a segmented backrest design. Curved integrated wood armrests flow seamlessly from the frame to create a cohesive, stately silhouette suited to formal interior layouts, with balanced proportions that align with standard conference and reception furniture arrangements.
Its construction prioritizes long-term structural integrity, starting with a kiln-dried solid hardwood frame finished in 2H hardness water-based red-brown lacquer. Frame joints use reinforced mortise-and-tenon connections secured with steel dowels for stable, long-wearing support. Internal seat and back support comes from 12mm thick E0/E1 grade bent plywood, upholstered in 1.5mm thick black top-grain leather and PU covering. The seat uses high-resilience cold-cure polyurethane foam at a density of 36kg/m³, while the backrest uses 30kg/m³ high-resilience polyurethane foam, both covered in matching segmented black upholstery. Non-slip rubber pads line each fixed leg to protect flooring surfaces, and the chair uses a semi-knockdown build with pre-fitted upholstered panels for straightforward on-site setup.
Functionally, the chair uses a fixed-position non-swivel, non-tilt structure with no height, tilt, or recline adjustments, supported by four stable fixed contact points with no casters, and is not designed for stacking. The horizontally contoured segmented backrest delivers targeted support for the lumbar and upper back, while curved fixed wood armrests provide consistent elbow support. The design supports a maximum static user load of 150kg, with foam properties suited for a maximum continuous seating duration of 4 hours.
This armchair fits a range of formal commercial and select residential settings: it works for fixed arrangements around corporate conference tables, as executive office guest seating adjacent to desks or side tables, in government hearing rooms and council chambers, for permanent training room layouts with stationary tables, in premium reception zones for high-profile visitors, and in dedicated boardrooms with fixed AV and table installations.
For procurement, note that each chair ships across two cartons, with a reference assembly time of 40 minutes per unit; the fixed non-stacking, non-adjustable structure is only suited to permanent, stationary layouts rather than flexible, reconfigurable spaces, and load and seating duration guidance should align with intended daily use patterns.

Red-brown Solid Wood Frame Black Padded Fixed-leg Conference Armchair Specifications

Suppliers and stock