Walnut Finish Beveled Edge Open Frame Low Media Console (model TVC-WLT-BEV-1800) is listed under Traditional Coffee Table, with overall dimensions of 1800 × 400 × 480 mm and main material of MDF. Load capacity: 136 kg. Certifications: Modern,minimalist,Open,box,frame,Low,profile,Single,open,shelf,Beveled,edge,detailing. This page consolidates 6 groups of specifications and GB / EN standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions | 1800 x 400 x 480 mm | |
|---|---|---|
| Open storage compartment dimensions | 1620 x 360 x 240 mm | |
| Top panel thickness | 25 mm | |
| Lower shelf panel thickness | 25 mm | |
| Side end panel thickness | 25 mm | |
| Corner chamfer width | 40 mm | |
| Cable management opening diameter | 55 mm | |
| Bottom clearance above floor | 0 mm | |
| Maximum supported TV screen size | 85 in | |
| Shelf usable depth | 360 mm | |
| Open bay internal height | 240 mm | |
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Top surface static load capacity | 136 kg | |
|---|---|---|
| Unit net weight | 53 kg | |
| Integrated hardware cycle rating | 10000 cycles | |
| Surface scratch resistance rating | 2000 cycles | |
| Tip-over stability load threshold | 45 kg | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Top and lower shelf panels | Walnut veneer over MDF core with polyurethane matte finish | |
|---|---|---|
| Side end panels | Walnut veneer over particleboard core with matching edge banding | |
| Joinery hardware | Zinc-plated steel cam lock and dowel connectors | |
| Rear cable management grommet | ABS plastic | |
| Panel edge treatment | Precision mitered chamfered bevel on all four vertical frame corners | |
| Back panel (if fitted) | 3mm hardboard |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Cable routing | Rear 55mm diameter grommet for media device power and signal wire management | |
|---|---|---|
| Open storage | Full-width single unobstructed shelf for media players, routers and decor | |
| Surface placement | Flat floor-placed design with no adjustable feet for minimal visual profile | |
| Display support | Reinforced top surface designed to support flat-screen TVs up to 85 inches |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential living room | Placed against a wall to hold flat-screen TVs and media components, with concealed cable routing | |
|---|---|---|
| Small lounge or studio apartment | Low open profile maintains sight lines while providing compact media storage without visual bulk |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Safety and performance requirements for domestic storage furniture and kitchen worktops, applicable for structural stability | |
|---|---|---|
| EN 312:2010 | Particleboard specification for dry interior use, applicable for core panel material grading |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for panel strength and dimensional tolerance checks | |
|---|---|---|
| GB 18580-2017 | Formaldehyde emission limits for wood-based panels, applicable for E1 grade panel material acceptance |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for panel strength and dimensional tolerance checks; 2. GB 18580-2017: Formaldehyde emission limits for wood-based panels, applicable for E1 grade panel material acceptance; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp